| |
|
Alert Type: | Updated * |
Bug Id: | CSCux18271 | Title: | 15454-M6-FTA2 reported as "actual equipment type" M6-FTA in inventory |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Inventory reports 15454-M6-FTA2 as M6-FTA in column "actual equipment type".
Conditions:
15454-M6-FTA2 and inventory functionality used
Workaround:
Verify the real equipment type in column "Product ID" of the Inventory
Further Problem Description:
|
|
Last Modified: | 07-JUN-2016 |
|
Known Affected Releases: | 10.3(0.3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva31879 | Title: | Not possible to create a PSM protected OCHCC circuit from CPO |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Not possible to create a PSM protected OCHCC circuit from CPO. Termination ports not shown on DWDM circuit wizard.
Conditions:
CPO managing DWDM point-to-point network equipped with PSM for the OTS link protection.
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 10.5(0.3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCud88078 | Title: | Inconsistencies changing OCHTrail name of a WSON OCHNC promoted to OCHCC |
|
Status: * | Terminated |
|
Severity: | 3 Moderate |
Description: * | $$PREFCS
Symptom:
The GMPLS OCHTrail name in Prime Optical does not match the corresponding circuit name in CTC.
Conditions:
Select an OCHNC WSON circuit from CTC circuit tab pane and perform the upgrade to OCHCC operation (invoking "Tools -> Circuits -> Upgrade OCHNC" menu item)
The circuit is correctly upgraded; a confirmation message appears to notify that the operation is successfully completed; OCHNC circuit is turned into OCHTrail; the OCHCC part must be manually created.
From Prime Optical circuit table select the OCHTrail and modify the circuit name.
The circuit name is correctly updated but:
a) the OCHTrail circuit Status becomes "Partial" (in CTC is DISCOVERED);
b) the OCHTrail circuit Service State becomes empty, no value is shown (in CTC is locked[Partial]);
c) the OCHTrail Circuit Protection Type becomes "Unknown" (in CTC is SPLITTER).
Create now the OCHCC part of the GMPLS circuit.
The GMPLS OCHCC circuit part is correctly created but OCHTrail name in CPO does not match the corresponding circuit name in CTC
Workaround:
The workaround for this problem is to modify again the name.
Further Problem Description:
|
|
Last Modified: | 15-JUN-2016 |
|
Known Affected Releases: | 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 9.6(3.246), 9.8(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz52078 | Title: | Empty physical location for alarms retrieved with Robust Fault sync |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Alarm Browser/Alarm Log physical location is shown empty for any alarm raised and cleared while a node is disconnected from CPO.
Conditions:
NE Robust Fault Synchronization is enabled on Prime Optical
NE Alarms rise and clear while the node is disconnected from CPO.
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 01-JUL-2016 |
|
Known Affected Releases: * | 10.5(0.3), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva29265 | Title: | User should be able to select section/path in TTI tab |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
For 10.3 Node in 10.6 CPO the small change in edit to keep either Path or Section in read-only; based on the row's Level selected. User should be able to select section/path in TTI tab and not able to edit in modify trace dialog
Conditions:
NA
Workaround:
NA
Further Problem Description:
NA
|
|
Last Modified: | 30-JUN-2016 |
|
Known Affected Releases: | 10.6(0.0.172) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus37316 | Title: | Unable to Open etwork Map via short key ALT+F+M (Domain Explorer) |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Unable to open Network Map via short key ALT+F+M (Domain Explorer of Prime Optical)
Also Unable to launch domain NE table.
as M is common in both
User should be able to launch them via short KEYs
Conditions:
See as per above
Workaround:
Launch manually without using short KEYs
Further Problem Description:
NA
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.94), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus74767 | Title: | Protection Group-strings exceeding maximum length should not be allowed |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
strings exceeding maximum length should not be allowed in Name filed of create Protection Group
Name filed of create Protection Group Wizard. The action should be prevented (as it is, for instance, for Label, Name field in the Create Circuit wizard).
Refer the attached Snapshot
NE type:Cisco NSC2k SDH
Conditions:
As per above
Workaround:
User should Enter the name in specified length, not more than that
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.132), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus37248 | Title: | Version mismatch while opening server from browser . |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Version mismatch while opening server from browser .
Conditions:
Version mismatch while opening server from browser .
while opening cefeo (10.0.3.94) from browser its showing 10.0.2. version on the main page.
Workaround:
NA
Further Problem Description:
NA
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.94), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut38856 | Title: | FTA 2 card always displayed with FTA GIF image |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
On Shelf View panel, the card is always displayed with the FTA GIF image.
The Actual Equipment Type field in the shelf inventory can be used to recognize which GIF image must be displayed to reflect the correct shelf configuration.
This is happening on both 15454 and NCS2K shelves.
Please, check the attached screenshot for reference.
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.183), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus37340 | Title: | Unable to Open Cisco Transport Controller via short key ALT+C+L |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Unable to open Cisco Transport Controller (CTC) via short key ALT+C+L (In NE Explorer )
Refer attached snapshot
Also Unable to launch L2 Topology Table.
as L is common in both
User should be able to launch them via short KEYs
Workaround- Launch manually without using short KEYs
Conditions:
as per above
Workaround:
Launch manually without using short KEYs
Further Problem Description:
NA
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.94), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus48300 | Title: | Getting Java Exceptions while exporting alarms from Alarm Browser |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Getting Java Exceptions while exporting alarms from Alarm Browser
Conditions:
Getting java exceptions while exporting alarms via Export to CSV option in Alarm browser.
Check the attachment for exceptions
CPO version: 10.3.0.0.94
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.94), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCud79214 | Title: | No message shown when attempting to access CPO with wrong credentials |
|
Status: | Terminated |
|
Severity: | 4 Minor |
Description: * | Symptom:
No warniing message is shown when user attempts to login into Prime Optical with wrong credential.
Conditions:
User attemps to login to Prime Optical portal with wrong user or password.
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 22-JUN-2016 |
|
Known Affected Releases: | 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 10.5(0), 9.6(0.128), 9.6(3.1), 9.8(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut02077 | Title: | Changes done from cpo not reflected on CTC of cooling profile |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Changes done from cISCO PRIME OPTICAL not reflected on CISCO TRANSPORT CONTROLLER of cooling profile (sdh 9.8)
Conditions:
Changes done from cISCO PRIME OPTICAl not reflected on cisco transport controller of cooling profile (sonet 9.8) and also there is 1 extra tab in cisco transport controller "rechedule cooling profile" which is not present in cisco prime optical
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.144), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus75287 | Title: | Errors on Java Console when trying to add a card |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Errors are appearing in the Java Console when performing the following actions:
- Open node (double click)
- Expand Rack in navigation table
- Select Shelf in navigation panel
- Right click any slot in the Shelf View
- Mouse-over on Add card to expand the list of available cards
Even with the presence of these errors in the Java Console, the Add card feature seems to work fine.
Conditions:
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.130), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCur87055 | Title: | CPO: Exporting Equipment Inventory to Local, lists repeat options |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Exporting equipment inventory to a local file lists repeat once, daily, weekly, monthly. On option 'Time' nothing than 'Now' should be selected (/selectable).
Conditions:
When export file is a local file.
Seen with CPO 10.0.2.1.6 (previous releases might also be affected).
On the CPO Domain Explorer, go to -> Configuration -> CTC based SDH NEs -> Equipment Inventory Table
File -> Export ...
Workaround:
Toggle between the Export File option 'Local' and 'Server' and back to 'Local', the Repeat drop down can't be selected anymore.
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.0(2.1), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut03513 | Title: | Not getting LaunchTL1 interface option on 9.8 and 9.6 sdh &10.5 15454SDH |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Not getting Launch TL1 interface option on 9.8 and 9.6 sdh NE
Conditions:
: sHOULD GET launch TL1 interface option on 9.8 and 9.6sdh NE
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.152), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuq39368 | Title: | Span and CTP report show Tunnel port and Span |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
In the inner report "CTP report" of Circuit Report there are listed also the Tunnel Ports and in "Span reports" there are the Tunnel span
Conditions:
For any OCHCC circuit, open related circuit report and inner report CTP report
Between other data also Tunnel ports are reported
Open Span Report
Tunnel spans are reported
This information
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.0(2.0.121), 10.3(0.0.1), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut12167 | Title: | No proper message for idle session time logout |
|
Status: | Open |
|
Severity: | 5 Cosmetic |
Description: | Symptom:
We are not getting proper message for idle session time log out.If we set the idle session time log out value from control panel to some value e.g 1. cisco prime optical domain explorer page getting closed after 1 mins with no message.
It should throw some message that session is log out because of idle time limit reached or something like this
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.3(0.0.158), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus61086 | Title: | Repeat option 'Equipment Inventory Table' export to a local file |
|
Status: | Open |
|
Severity: | 5 Cosmetic |
Description: | Symptom:
Repeat option to export a local file is available
Conditions:
When exporting the 'Equipment Inventory Table' to a local file.
Navigation: Domain-Explorer -> Configuration -> CTC-Based SDH NEs -> Equipment Inventory table
Dort; then File -> Export
Workaround:
(toggling between 'Local' and 'Server' back to 'Local')
Further Problem Description:
none
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: * | 10.0(2), 10.5(0), 10.6(0.0.1) |
|
Known Fixed Releases: | |
|
|
| |
2015 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论