| |
|
Alert Type: | Updated * |
Bug Id: | CSCva18369 | Title: | Found a crash of mibd on P1 |
|
Status: | Other |
|
Severity: | 2 Severe |
Description: * | Symptom: Found a crash of mibd on P1
Core location:/auto/tftp-sjc-users1/siddesai/mibd_entity_6450.by.11.20160621-035451.xr-vm_node3_RP0_CPU0.c7135.core.gz RP/0/RP0/CPU0:P1#show version Wed Jun 22 04:56:52.316 PDT
Cisco IOS XR Software, Version 6.1.1.17I Copyright (c) 2013-2016 by Cisco Systems, Inc.
Build Information: Built By : jnadimpa Built On : Wed Jun 15 01:22:20 PDT 2016 Build Host : sjc-ads-1456 Workspace : /nobackup/jnadimpa/611-QIP-17I-XR Version : 6.1.1.17I Location : /opt/cisco/XR/packages/
cisco NCS-6000 () processor System uptime is 2 hours, 27 minutes
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux48821 | Title: | issu_vbit is not set in pdma_hdr in case of BFD MP packet |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: issu_vbit is not set in pdma_hdr in case of BFD MP packet , causing control code injects wrong-version packets causing ppe dumps
Conditions: ISSU from one image to another image on NCS-6k with bfd mp configured
Workaround: None but after ISSU , do install commit and reload the VM and the issue will recover
Further Problem Description:
|
|
Last Modified: | 17-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.38i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz85639 | Title: | 611-16i (ncs6k MC) - fgid_mgr process crash on Non-lead stby RP reload |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: fgid_mgr process crash
Conditions: on non lead stby rp reload during deactivation of dummy smu (reload/restart smu)
Workaround: not sure
Further Problem Description:
|
|
Last Modified: | 24-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 6.1.1.18i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz84929 | Title: | NCS 6008 FCC chassis shutdown due to fan trays not being detected |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: An NCS 6008 Fabric Card Chassis (FCC) may shut down if it doesn't detect both fan trays
Conditions: This may occur on an NCS 6008 Multichassis router running IOS XR version 5.2.5
Workaround: Powercycle the Fabric Card Chassis (FCC)
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 5.2.4.BASE, 5.2.5.ADMIN |
|
Known Fixed Releases: * | 5.2.6.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz51184 | Title: | NCS6K: USB without removable media bit (RMB) set |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: With Certain USB stick, bios boot order will not be correct. NCS6k RP/SC will keep booting from the USB on reboots instead of booting for Hard disk.
Conditions: Certain USB stick Doesnt set removable media bit, due to this Bios treats the USB Stick as hard drive and sets higher priority for the USB stick in boot order.
Workaround: Replace the USB stick with other Model.
Further Problem Description: Correct boot order is Disk, USB and PXE. When USB model which doesnt have removable media bit set is inserted, Boot order may go wrong, it will be USB, Disk and Pxe. Due to this NCS6k RP/SC will keep booting from USB Disk on reboots.
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 6.1.1.19i.BASE, 6.2.1.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy75075 | Title: | NCS6K: show commands serviced by shelfmgr not reaching rack 2 and 3 |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: show commands serviced by shelfmgr not reaching rack 2 and 3
Conditions: after OCU followed by router reload
Workaround: None
Further Problem Description:
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.1.1.17i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz13628 | Title: | bgp crash on Standby RP on flapping bgp sessions |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: BGP process crash
Conditions: Per CE labels are used and such a label is released.
Workaround: Use a different label allocation mode
Further Problem Description:
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 5.3.4.4i.ROUT, 6.0.2.10i.ROUT, 6.1.1.14i.ROUT |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz78818 | Title: | NCS 6008 LCC chassis shutdown due to fan trays not being detected |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: An NCS 6008 router may shut down if it doesn't detect both fan trays
Conditions: This may occur on an NCS 6008 router running IOS XR version 5.2.5
Workaround: There is no workaround at this time, the fan trays must be replaced. If the router is reloaded, the fan trays will not function and the fan tray LED will not light up.
Further Problem Description:
|
|
Last Modified: | 01-JUL-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: * | 6.1.1.20i.BASE, 6.2.1.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux82987 | Title: | Enhance Parity/ECC handling to avoid PON reset |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: FIA/SFE devices can PON reset due to ECC/PARITY errors even after having the fix for CSCuw49505
Conditions: Parity/ECC errors
Workaround: None
Further Problem Description:
|
|
Last Modified: | 01-JUL-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.1.1.20i.BASE, 6.2.1.2i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux35926 | Title: | NCS6K drops VPLS PDUs over P2MP TE tunnel as P2MP unknown payload |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: Traffic drop on ingress P2MP TE tunnel on NCS6K with reason "P2MP unknown payload"
Conditions: NCS6K with MPLS TE P2MP tunnel transporting traffic that is anything other than IPv4 or IPv6.
Workaround: None
Further Problem Description:
|
|
Last Modified: | 22-JUN-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: * | 6.1.1.17i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva31588 | Title: | (N6k-611)F1/SC1 in calv went to Failed state on deactiva of rel/res smu |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: | Symptom: f1/sc1 went to failed state
Conditions: on deactivation of reload/restart smu with f1/sc1 card reload
Workaround: not sure
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy75909 | Title: | [xr-dev] timezone_config process crashed at sysadmin vm |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: Crash of the Time-zone config process on sysadmin on RPFO or reload . Back trace points to readfill() call in confd .
Conditions: During connection establishment with confd and thereafter reading it , confd api to readfill() hangs and process manager kills the process .
Workaround: none , but the process will self recover , and no impact on service .
Further Problem Description:
|
|
Last Modified: | 02-JUN-2016 |
|
Known Affected Releases: | 6.1.0.BASE |
|
Known Fixed Releases: | 6.1.1.15i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva26634 | Title: | NCS6K MC : Missing HBLoss logs from SC card |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: | Symptom: logs missing from SC card for hbloss
Conditions: debug logs missing
Workaround: na
Further Problem Description:
|
|
Last Modified: | 28-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw41928 | Title: | Error handling in LPTS needs to be improved |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom: lpts_pa process blocked
Conditions: race condition
Workaround: process restart
Further Problem Description:
|
|
Last Modified: | 20-JUN-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: | 5.2.5.29i.BASE, 5.3.3.14i.BASE, 6.0.0.19i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz90839 | Title: | XRVM SMU discrepancy between 'sh install active' and 'sh install commit' |
|
Status: | Other |
|
Severity: | 2 Severe |
Description: * | Symptom: Inconsistency number of SMUs between 'show install active' and 'show install commited'
Conditions: issue seen after installing CSCuz66791
Workaround: N/A
Further Problem Description: N/A
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz20467 | Title: | NCS6K 525: 240K ACE config load take long time (apporx 2hrs) |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom: The issue is with config load [even from the local file system]. While the config commit goes through in a few minutes. So the issue seems to be with parser.
Conditions: while loading config from config mode thru "Load harddisk:/ is 2hr for 240k ACE config file. for reduced 28k ACE, its taking 14 mins.
Workaround: as of now no workaround is given.
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 5.2.5.BASE, 6.0.1.BASE, 6.2.1.BASE |
|
Known Fixed Releases: * | 5.2.6.1i.BASE, 6.1.1.15i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCva30152 | Title: | show install CLIs stopped working in XRVM |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: * | Symptom: show install cli are not working
Conditions: N/A
Workaround: restart inst_mgr
Further Problem Description:
|
|
Last Modified: | 01-JUL-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz73006 | Title: | DR partition creation MEDIASVR-MEDIASVR-4-FAILED_FILESYSTEM_ACCESS |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: Below error message is seen few minutes after DR partition is created:
1/RP1/ADMIN0:May 18 20:25:12.603 : mediasvr[2587]: %MEDIASVR-MEDIASVR-4-FAILED_FILESYSTEM_ACCESS : Filesystem issue detected: this card may need to be re-imaged in order to recover from this
Conditions: DR partition is in progress
Workaround: N/A
Further Problem Description: N/A
|
|
Last Modified: | 30-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.2.1.2i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz83020 | Title: | Multiple craft panel entries in admin/xr show hw-mod fpd o/p |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: Multiple craft panel entries in admin/xr show hw-mod fpd o/p
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 30-JUN-2016 |
|
Known Affected Releases: * | 6.1.0.BASE, 6.1.1.BASE |
|
Known Fixed Releases: | 6.1.1.18i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva28991 | Title: | Invalid file path detected while running hushd ctracedec |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom: Multiple instances of Invalid file path messages displayed when trying to run ctracdec on hushd
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 30-JUN-2016 |
|
Known Affected Releases: | 6.0.1.12i.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy16313 | Title: | NTP clock does not change from synchronized to unsynchronized |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: NTP association drops sys_peer/INIT after applying ACL however show ntp status still shows synchronized.
Conditions: NCS6k running 5.2.3/5.2.4
Workaround: Remove and re-add NTP configuration
Further Problem Description:
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 5.2.3.BASE |
|
Known Fixed Releases: * | 5.3.4.4i.BASE, 6.0.1.27i.BASE, 6.1.1.7i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz65196 | Title: | 611:admin show tech fabric takes ~18 min |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: 611:admin show tech fabric takes ~18 min
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 28-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 6.1.1.17i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw44486 | Title: | HS0 / PORT 112 is down after SC reload |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: HS link and/or LCC Exp links are down after SC0 shutdown and reload.
Conditions: Power down the SC then reload
Workaround: Reload SW card.
Further Problem Description:
|
|
Last Modified: | 24-JUN-2016 |
|
Known Affected Releases: | 5.2.4.ADMIN, 5.2.4.BASE |
|
Known Fixed Releases: * | 5.2.5.33i.BASE, 5.2.5.38i.BASE, 5.2.5.41i.BASE, 6.0.1.15i.BASE, 6.2.1.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz70756 | Title: | NCS6K remove the ability to shutdown the instance plane by operator |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: * | Symptom: Attempting to shutdown instance's on the plane
Conditions: during plane shutdown
Workaround: do not shutdown the instances
Further Problem Description: N/A
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux59466 | Title: | show tech mpls ldp causes mpls ldp to crash on the Standby RP |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: MPLS LDP will crash on the standby RP when there is a local address entry in pending NSR database.
Conditions: show tech mpls ldp is run
Workaround: none
Further Problem Description:
|
|
Last Modified: | 22-JUN-2016 |
|
Known Affected Releases: | 5.2.1.CE |
|
Known Fixed Releases: * | 5.3.4.3i.MPLS, 6.0.1.14i.MPLS |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCva06942 | Title: | snmp output is empty for entPhysicalName on A41 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom: snmp output is empty for entPhysicalName on A41 (sc).Here are the logs
http://ott-pixr1.cisco.com/cgi-bin/hfr-mpls/auto-view.php?file=/auto/ott-tst/apache/htdocs/ena-rsvp-regression/regression_archives/www/2016Jun/siddesai/600706372-1-930500-nocui_run_all.2016Jun12_22:57:02.earms_empty_testbed/TaskLog.pretest_2016-Jun-12-22_58_35.html#fail-5-1
RP/0/RP0/CPU0:A41#show version Tue Jun 14 03:01:34.974 PDT
Cisco IOS XR Software, Version 6.1.1.17I Copyright (c) 2013-2016 by Cisco Systems, Inc.
Build Information: Built By : nkhai Built On : Thu Jun 2 12:29:04 PDT 2016 Build Host : iox-ucs-010 Workspace : /auto/iox-ucs-010-san1/production/6.1.1.17I.SIT_IMAGE/ncs6k/workspace Version : 6.1.1.17I Location : /opt/cisco/XR/packages/
cisco NCS-6000 () processor System uptime is 4 days, 23 hours, 29 minutes
Conditions:
Workaround:
Further Problem Description: |
|
Last Modified: | 21-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz64712 | Title: | NCS-6K- Core dump on BGP show commands |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: BGP core dump on executing the following command
2016/04/07 22:37:34 UTC executed command show bgp label 16002
RP/0/RP0/CPU0:Apr 7 22:37:39.062 UTC: dumper[66261]: %OS-SYSLOG-6-LOG_INFO : Dumping core /misc/scratch/core/bgp_show_25267.by.11.20160407-223738.xr-vm_node0_RP0_CPU0.29ee3.core.gz RP/0/RP0/CPU0:Apr 7 22:37:50.796 UTC: isis[1006]: %ROUTING-ISIS-4-LSPTOOBIG : L2 LSP cr01.sunnyvale.ca.ibone.00-00 size 1799 bigger than interface TenGigE0/0/0/1/9.102 MTU 1497, LSP dropped RP/0/RP0/CPU0:Apr 7 22:38:02.525 UTC: dumper[278]: %OS-COREHELPER-6-CORE_COPIED : Copied core bgp_show_25267.by.11.20160407-223738.xr-vm_node0_RP0_CPU0.29ee3.core.gz to 0/RP0/CPU0:/misc/disk1 RP/0/RP0/CPU0:Apr 7 22:38:02.658 UTC: dumper[278]: %OS-COREHELPER-6-DELETE_CORE : Deleted core file bgp_show_25267.by.11.20160407-223738.xr-vm_node0_RP0_CPU0.29ee3.core.gz. RP/0/RP0/CPU0:Apr 7 22:38:50.799 UTC: isis[1006]: %ROUTING-ISIS-4-LSPTOOBIG : L2 LSP cr01.sunnyvale.ca.ibone.00-00 size 1799 bigger than interface TenGigE0/0/0/1/9.102 MTU 1497, LSP dropped RP/0/RP0/CPU0:Apr 7 22:39:52.200 UTC: mpls_ldp[1042]: %ROUTING-LDP-4-PEER_DUP_ADDRS : VRF 'default' (0x60000000), 1 Duplicate address(es) advertised by more than one peer RP/0/RP0/CPU0:Apr 7 22:40:50.805 UTC: isis[1006]: %ROUTING-ISIS-4-LSPTOOBIG : L2 LSP cr01.sunnyvale.ca.ibone.00-00 size 1799 bigger than interface TenGigE0/0/0/1/9.102 MTU 1497, LSP dropped
Conditions: Customer issued show command on production router
Workaround: None
Further Problem Description:
|
|
Last Modified: | 16-JUN-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: * | 6.0.2.9i.ROUT, 6.1.1.16i.ROUT |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz64910 | Title: | Console cleanup - netio |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom: Cleaning up debug and non-formatted logs from showing up in syslog.
Example like: RP/0/RSP0/CPU0:May 22 05:52:18.926 : netio[345]: STUB netio_write_to_tap_device:36 - write packet b1cfd100 RP/0/RSP0/CPU0:May 22 06:43:32.518 : netio[345]: STUB netio_write_to_tap_device:36 - write packet b1cf9f70 RP/0/RSP0/CPU0:May 22 06:59:26.820 : netio[345]: STUB netio_write_to_tap_device:36 - write packet b1cfbc08
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 16-JUN-2016 |
|
Known Affected Releases: | 6.0.1.BASE, 6.1.1.BASE |
|
Known Fixed Releases: * | 6.0.2.9i.FWDG, 6.1.1.18i.FWDG |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy42141 | Title: | NCS6K:show tech envmon/slice_manager taking ~45min on MC |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: show tech envmon/slice_manager taking ~45min on MC
Conditions: always
Workaround:
Further Problem Description:
|
|
Last Modified: | 14-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.1.1.18i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun02364 | Title: | Critical alarm LED lit on craft panel despite no active alarms |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom: The Critical alarm LED is lit up amber on the craft panel even though show alarms confirms there are no active alarms on the system.
Conditions: Seen after RP Failover.
Workaround: Performing another RP Failover may clear the issue.
Further Problem Description:
|
|
Last Modified: | 05-JUN-2016 |
|
Known Affected Releases: | 5.0.1.ADMIN |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz92872 | Title: | ncs6k: xrvm show platform displays incorrect node state |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom: show platform on xrvm and calvados displays different node state for LCs.
Conditions: LC failed to boot up fully due to calvados HBloss.
Workaround: Reimaging LC.
Further Problem Description: |
|
Last Modified: | 02-JUN-2016 |
|
Known Affected Releases: | 5.2.4.LC |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz16070 | Title: | Calv_instagt changes for system downgrade path (6.1.1->5.2.x) |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom: SU (downgrade) from 6.1.1 to 5.2.x fails due to wrong XR data partition being used for partition prepare.
Conditions: Install System Upgrade operation
Workaround: External PXE installation.
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 5.2.6.1i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz89416 | Title: | Clean up expected ASIC errors on resets/reloads from syslog |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom: Clean up expected ASIC errors on resets/reloads from syslog
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 01-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz78678 | Title: | LDP NSR keeps flapping after RP failover |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom: LDP NSR keeps flapping after RP failover
Conditions: RP failover
Workaround: to recover, restart mpls_ldp on the active RP
Further Problem Description:
|
|
Last Modified: | 02-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.0.2.7i.MPLS |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz77252 | Title: | link onfo shows flag as "V" instead of "T" for CXP wrong connection |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Release-note
Symptom: sfe link info shows flag as "V" instead of "T" for CXP wrong connection
Conditions: rx-los errors are checked while setting the link down, due to which the link down \ reason is being set to V
Workaround: NA
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 6.2.1.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva26732 | Title: | Sysdb_mc process crashed (2 times) without any obvious/known trigger |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom: Sysdb_mc process crashed (2 times) without any obvious/known trigger
Conditions: no obvious/known trigger
Workaround: none
Further Problem Description: n/a
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz98118 | Title: | Cons msg is not displayed for successful install opt after proc restart |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom: the log level of a console message is raised from info to critical for a case where operation completed succrssfully
Conditions: when user executes an operation ios prints a message on console saying operation finished succressfully.
Workaround:
Further Problem Description:
|
|
Last Modified: | 30-JUN-2016 |
|
Known Affected Releases: | 6.1.1.BASE |
|
Known Fixed Releases: * | 6.2.1.2i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy33071 | Title: | 611-PBT:smp logs not backed up in xrvm across reload |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:This is an enhancement DDTS.
If the LC reload happens we dont have the SMP logs to triage any issue before reloads.
This DDTS will backup the smp logs before going for LC reload Conditions: NA Workaround:NA
More Info:NA
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 6.1.1.MGBL |
|
Known Fixed Releases: | 6.1.1.7i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz85884 | Title: | NCS6K 5.2.5 remove unwanted %MGBL-CONFIG-7-INTERNAL_NATIVITY_FILE |
|
Status: | Open |
|
Severity: | 6 Enhancement |
Description: * | Symptom: Remove unwanted log messages
Conditions: N/A
Workaround: N/A
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz94431 | Title: | Traffic loss of 3 secs seen on bundle member link unshut |
|
Status: | Open |
|
Severity: * | 6 Enhancement |
Description: | Symptom: Traffic loss of 3 secs observed on bundle member link unshut
Conditions: Scale of 2K TE midpoints on bundle , member links on diff LC
Workaround: None
Further Problem Description:
|
|
Last Modified: | 16-JUN-2016 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy17220 | Title: | Include follow process output in show-tech slice-manager |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:This is enhancement DDTS which has the output of follow process slice_manager in the show tech-support slice_manager.
This will help to triage the customer case if the slice manager process is blocked for quite sometime Conditions:NA Workaround:NA
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 6.1.0.BASE |
|
Known Fixed Releases: | 6.1.1.5i.BASE |
|
|
| |
没有评论:
发表评论