| |
|
Alert Type: | Updated * |
Bug Id: | CSCux22982 | Title: | Dashboard disable not applied, subsequent login portlets replicated |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
- When disabling use dashboard, on next login dashboard is back enabled
- If you try to disable it again, on next login portlets doubles
- If you try to remove unnecessary portlets, on next login there are even more
Conditions:
Dashboard is enabled, populated with portlets and then disabled
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 05-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.1) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux99901 | Title: | UCSD default Zoneset Activate Rollback causes Outage |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: | Symptom:
While making any changes to zoning, the ZoneSet for that VSAN needs to be activated for changes to take into effect. However if user decides to undo the modification it calls rollback feature of the workflow.
The issue with the rollback is it will not only removed the modification but also deactivates the entire ZoneSet for the VSAN causing SAN outage
Conditions:
Zoneset exists and is activated
Workaround:
Both steps are mandatory
Dont rollback Zoneset Activate task.
Reactivate the Zoneset either from fabric or from UCSD
Further Problem Description:
|
|
Last Modified: | 27-JAN-2016 |
|
Known Affected Releases: | 7.3(0)ZN(0.99) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux92424 | Title: | UCSD LDAP import with Group Filter not importing all users |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: * | Symptom:
Both Manual and Auto LDAP user imports with Group filter set don't pick up all users
Conditions:
LDAP Import with Group Filter set to Group Name doesn't select all users in that group
Workaround:
Import the user by setting a filter for the individual user name. One user at a time for missing ones from Group Filter.
Further Problem Description:
|
|
Last Modified: | 21-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux76964 | Title: | Guided Setup wizard disappear upon "Move UP"/"Move Down" action |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Guided setup wizard disappear.
Conditions:
Select any setup wizard under "Administration -> Guided Setup" and click either "Move Up" or "Move Down" button.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux91702 | Title: | JDODataStoreException may cause Inventory DB to grow huge and go down |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: * | Symptom:
UCS Director's Inventory Database may grow steadily and gradually fill up the entire available disk space, eventually causing MySQL to fail, causing UCS Director to go down.
The UCSD Inframgr logs show a huge amount of errors (the same one repeating over and over again) similar to the following:
---
2016-01-04 12:18:07,941 [WFExec-4237-2] ERROR insert(ObjStore.java:127) - Exception while inserting
javax.jdo.JDODataStoreException: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
---
(Followed by a traceback)
Conditions:
Precise conditions are not known at this time.
Workaround:
Open a Cisco TAC Service Request to remove the offending DB records.
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux93722 | Title: | User Action Icon Selection unclear |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
User Action Icon selection. There seem to be certain key words that trigger a certain icon. Delete will give you a red X. Not sure what the other options are. Very inconsistent. We need to be able to select the user action ikon.
Conditions:
User Action Icon selection. There seem to be certain key words that trigger a certain icon. Delete will give you a red X. Not sure what the other options are. Very inconsistent. We need to be able to select the user action ikon.
Workaround:
User Action Icon selection. There seem to be certain key words that trigger a certain icon. Delete will give you a red X. Not sure what the other options are. Very inconsistent. We need to be able to select the user action ikon.
Further Problem Description:
User Action Icon selection. There seem to be certain key words that trigger a certain icon. Delete will give you a red X. Not sure what the other options are. Very inconsistent. We need to be able to select the user action ikon
|
|
Last Modified: | 21-JAN-2016 |
|
Known Affected Releases: | 5.4(1.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux43687 | Title: | VM provision failed with NPE getting VM Network Interface Template |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
VM provisioning failed. Exception while getting updated network interface list Exception while getting VM Network Interface for Template
Conditions:
none
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 25-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.1) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux09067 | Title: | Cloned GroupAdmin user can see VMs of other tenants |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
When selecting a catalog item that requires selection of a VM, the user sees the list of all VM's known by UCS Director, instead of just seeing the list of VM's in the user's group.
Conditions:
This only occurs if the user has a user role that is a (customized) clone of the regular GroupAdmin role.
Workaround:
Clone the GroupAdmin role again but keep the string "GroupAdmin" in the new name, e.g. "GroupAdmin1".
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.1) |
|
Known Fixed Releases: * | 5.3(2.1), 5.4(0.1) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy01018 | Title: | Config Rack Server task "OUTPUT_CIMC_SERVER_SLOT_1_MAC_ADDRESS" issue |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Configure Rack Server task "OUTPUT_CIMC_SERVER_SLOT_1_MAC_ADDRESS" output is empty when VIC cards are used.
Conditions:
None
Workaround:
Provide the output manually in the next task
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: * | 5.4(0.0), 5.4(0.2) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux82500 | Title: | Send Email Through Template ${INITIATING_USER} variable does not work |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
problem when trying to set up the ?Send Email Through Template? task. When I attempt to use the ?${INITIATING_USER}? variable I get an error stating ?Contact Email ${INITIATING_USER} is not valid?.
Discovered by customer
Jung, Jeremiah
Conditions:
problem when trying to set up the "Send Email Through Template" task. When I attempt to use the "${INITIATING_USER}" variable I get an error stating "Contact Email ${INITIATING_USER} is not valid".
Workaround:
problem when trying to set up the ?Send Email Through Template? task. When I attempt to use the ?${INITIATING_USER}? variable I get an error stating ?Contact Email ${INITIATING_USER} is not valid?.
Further Problem Description:
problem when trying to set up the ?Send Email Through Template? task. When I attempt to use the ?${INITIATING_USER}? variable I get an error stating ?Contact Email ${INITIATING_USER} is not valid?.
|
|
Last Modified: | 13-JAN-2016 |
|
Known Affected Releases: | 5.4(1.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux82513 | Title: | Script Module Tabular reports cant be filtered |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
when using script modules tabular reports the admin filter does not work
Please look at workflow and screen shots.
Conditions:
when using script modules tabular reports the admin filter does not work
Please look at workflow and screen shots.
Workaround:
when using script modules tabular reports the admin filter does not work
Please look at workflow and screen shots.
Further Problem Description:
when using script modules tabular reports the admin filter does not work
Please look at workflow and screen shots.
|
|
Last Modified: | 13-JAN-2016 |
|
Known Affected Releases: | 5.4(0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux11103 | Title: | Exporting Workflow with script module does not select script module |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Exporting a workflow with a script module does not select the script module
Please see
https://communities.cisco.com/docs/DOC-63761
Conditions:
UCSD 5.4
Workaround:
Manually select script module to be included in the workflow export.
Further Problem Description:
Please special note
https://communities.cisco.com/docs/DOC-63761
|
|
Last Modified: | 13-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux13056 | Title: | Retry Execution Setting in a task are not retained when the WF is cloned |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Retry Count and Retry Execution Setting in a task are not retained when the workflow is cloned
Conditions:
Workflow cloning with Retry Execution settings
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 07-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.1) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux22439 | Title: | UCSD GUI fails with Flex Error #1001: Digest mismatch with RSL |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Access to the Cisco UCS Director GUI fails with the following error, immediately after logging in:
Flex Error #1001: Digest mismatch with RSL http://10.0.0.10/app/cloudmgr/cloupia_common.swf. Redeploy the matching RSL or relink your application with the matching library.
Conditions:
This can happen after an upgrade of the UCS Director appliance. Exact conditions are not know at this time.
Workaround:
A number of different workarounds have been reported to work:
1) Clear the browser cache
2) Restart the browser (or all open browsers)
3) Use a different browser
4) Use HTTP instead of HTTPS, or vice versa
5) Perform a browser reset, as described in the following documents. Please note that this will erase any specific browser settings you may have configured.
For Firefox:
https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings
For Internet Explorer:
http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings#ie=ie-11
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 4.0, 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux71944 | Title: | Beta Test: UI issues - Please see the attached spreadsheet for details |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Please see the attached spreadsheet for details
Conditions:
Workaround:
Further Problem Description:
Please see the attached spreadsheet for details
|
|
Last Modified: | 05-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux90796 | Title: | NetApp Inventory task is missing when Collect Inventory task is executed |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
- Collect Inventory task is not triggering inventory on NetApp account
- NetApp Inventory task is missing when Collect Inventory task is executed
Conditions:
Using 'Collect Inventory' task for triggering NetApp Inventory
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.2), 5.5(0.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux44855 | Title: | Nexus Device: Update Trunk Task overwrites the existing VLAN config |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Observed on a Nexus device in UCS-D 5.3.2.0 release.
Conditions:
Workaround:
use Network Device CLI task
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux57577 | Title: | Remove Capacity Reservation error during workflow rollback |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Remove Capacity Reservation error is seen during workflow rollback.
Conditions:
This happens when the reserved ip address is assigned to a VM, VMware Inventory Collector runs at least once, and "IP Pool Policy Usage Report" shows the IP as used with usage reported by "VMware-connector"
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux81732 | Title: | Diagnostic Log required Part of DFA Fabric Inventory Collection |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
DCNM Partition and Network information is deleted from UCSD after an Inventory Collection.
Conditions:
None
Workaround:
1.Login into the UCSD.
2.Navigate to Administration -> Physical Accounts -> Multi Domain Manager -> Select the DCNM Account and Delete it.
3.Navigate to Administration ->System -> System Task -> Under Cisco Fabric Tasks -> DCNM Deleted Account Cleanup Task.
Navigate to Physical -> Network -> Multi Domain Manager -> DCNM Accounts -> DCNM Account Created -> Fabric Discovered Organization tab -> Click on Sync DCNM.
Step5 will fetch all the Organizations present with the Orchestration of the current UCSD into the Fabric Discovered Organization.
6.Select the Organization and click on Assign Group will fetch the organization, partitions and networks into the corresponding tabs.
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux32904 | Title: | UCSD multi-workflow env, embedded workflow doesn't work expectedly |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
When a workflow(named test_child, executes "Execute Cloupia Script") is embedded in another workflow(test_parent), following two unexpected phenomenon occur.
2) Input_admin is set for inputting fixed value ?I'm an admin? as Admin Input value.
It works fine when test_child is run alone but NOT when test_parent is run.
Conditions:
UCSD Version 5.3.2, haven't done test for other versions.
I got workflow from customer and recreated the same phenomenon with our environment.
Workaround:
None
Further Problem Description:
NA
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux79489 | Title: | Vm Resource allocation selecting the wrong datastore |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Wrong datastore selection though conditions are specified in storage policy.
Conditions:
Multi VM provisioning, the issue happens at random.
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux61497 | Title: | Add PNIC to DVSwitch task random failures |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Add PNIC to DVSwitch task fail randomly.
Conditions:
Last host node of VMware account is passed as an user input to "Host Node" task input.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw57712 | Title: | Unable to import if workflow name is with japanese/Chinese characters |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Unable to import if workflow name is with japanese/Chinese characters
Conditions:
Workflow file should be .wfdx file for Workflow import into Cisco UCSD
Workaround:
Please rename the Workflow in english character and import into cisco ucs director, Fix will be on 5.4 MR1 release
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy04550 | Title: | RHEL kick-start is failing when the user used "#" in the SSH password |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
RHEL kick-start is failing when the user used ?#? in the SSH password
Conditions:
RHEL kick-start is failing when the user used ?#? in the SSH password
Workaround:
Enter Alpha numeric password
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux98211 | Title: | UCS Director - Stack View for EMC VNX Shows Values of (null) |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
When UCS Director maps the Virtual Machine and its dependencies in Stack View for a given VM that is backed by EMC, the details of the storage backing the ESX datastore is not complete.
Conditions:
Environment:
UCSD 5.4.0.1
EMC VNX5500 05.31.000.5.502
Vmware vCenter Appliance 5.1
Have confirmed with another system engineer in Cisco with their lab that they see the same behavior.
Workaround:
None found.
Further Problem Description:
There does not seem to be a way to troubleshoot the Stack View to see why it is missing these values. Nor does there seem to be a way to force the rebuilding of this information.
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 5.4(0.1) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux06605 | Title: | UCSD 5.3.2.0 / Bind Thin Device to VMAX Thin Pool Failed |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
UCSD 5.3.2.0 / Bind Thin Device to VMAX Thin Pool Failed
Conditions:
None
Workaround:
None
Further Problem Description:
None
|
|
Last Modified: | 05-JAN-2016 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.3(2.1), 5.4(0.1) |
|
|
| |
2015 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论