| |
|
Alert Type: | Updated * |
Bug Id: | CSCut22886 | Title: | ME3800 doesn't forward RSTP over EVC with dot1ad encapsulation |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Me3800 drops the RSTP bpdu at the EVC level when EVC xconnect with dot1ad encapsulation
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 02-SEP-2015 |
|
Known Affected Releases: | 15.4(3)S1.1 |
|
Known Fixed Releases: * | 15.4(3)S3.8, 15.5(1)S2.9, 15.5(2.19)S, 15.5(3)S |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCtz74604 | Title: | Crash observed on enabling scaled 6PE configuration |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptoms: With a scaled 6PE and 6VPE configuration, a crash is observed.
Conditions: This symptom is observed on flapping the interfaces, and defaulting
the configurations with a scaled 6PE and 6VPE configuration.
Workaround: There is no workaround.
|
|
Last Modified: | 18-SEP-2015 |
|
Known Affected Releases: | 15.2(2.19)S0.2, 15.3(0.14)S |
|
Known Fixed Releases: | 15.2(4)S0.8, 15.2(4)S1, 15.2(4)S1c, 15.2(4)S2, 15.2(4)S3, 15.2(4)S3a, 15.2(4)S4, 15.2(4)S4a, 15.2(4)S5, 15.2(4)S6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv48267 | Title: | DMM session invalidated at end of first aggregation interval |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
getting flag status as suspect in ip sla history after configuring DMM
Conditions:
1.Configure ethernet evc
2.configure cfm mep
3.configure 1DM and verify ip sla history
4.configure DMM and verify ip sla history
Workaround:
na
Further Problem Description:
na
|
|
Last Modified: | 24-SEP-2015 |
|
Known Affected Releases: | 15.6(1)S |
|
Known Fixed Releases: * | 15.5(3)M0.2, 15.6(0.10)T, 15.6(0.13)S |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv48214 | Title: | Untagged service instance encap resulting in RMEPs not being learnt |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
RMEPs not being learnt
Conditions:
1.Configure switchport on RTB1 and RTB2
2.configure cfm mep on both box
3.configure service instance and check for RMEP
Workaround:
na
Further Problem Description:
na
|
|
Last Modified: | 24-SEP-2015 |
|
Known Affected Releases: | 15.6(1)S |
|
Known Fixed Releases: * | 15.5(3)M0.2, 15.6(0.10)T, 15.6(0.13)S |
|
|
| |
2013 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论