Cisco Notification Alert -Cisco Optical - Prime Optical-01-Oct-2015 16:50 GMT

Feedback Sign Up Unsubscribe         End-of-Sale and End-of-Life Announcements - Prime Optical Title: End-of-Sale and End-of-Life Announcement for the Cisco Prime Optical 10.0 Description: Cisco announces the end-of-sale and end-of-life dates for the Cisco Prime Optical 10.0. The last day to order the affected product(s) is March 10, 2016. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract. Click here for the French Version of this Bulletin. Date: 11-SEP-2015 Find additional information in End-of-Sale and End-of-Life Products Security Advisories & Responses - Prime Optical Title: OpenSSL Alternative Chains Certificate Forgery Vulnerability (July 2015) Affecting Cisco Products Description: On July 9, 2015, the OpenSSL Project released a security advisory detailing a vulnerability affecting applications that verify certificates, including SSL/Transport Layer Security (TLS)/Datagram Transport Layer Security (DTLS) clients and SSL/TLS/DTLS servers using client authentication. Multiple Cisco products incorporate a version of the OpenSSL package affected by this vulnerability that could allow an unauthenticated, remote attacker to cause certain checks on untrusted certificates to be bypassed, enabling the attacker to forge "trusted" certificates that could be used to conduct man-in-the-middle attacks. This advisory will be updated as additional information becomes available. Cisco will release free software updates that address this vulnerability. Workarounds that mitigate this vulnerability may be available. This advisory is available at the following link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20150710-openssl Date: 16-SEP-2015 Title: Multiple Vulnerabilities in OpenSSL (January 2015) Affecting Cisco Products Description: Multiple Cisco products incorporate a version of the OpenSSL package affected by one or more vulnerabilities that could allow an unauthenticated, remote attacker to cause a denial of service condition or perform a man-in-the-middle attack. On January 8, 2015, the OpenSSL Project released a security advisory detailing eight distinct vulnerabilities. The vulnerabilities are referenced in this document as follows: CVE-2014-3571: OpenSSL DTLS Message Processing Denial of Service Vulnerability CVE-2015-0206: OpenSSL dtls1_buffer_record Function DTLS Message Processing Denial of Service Vulnerability CVE-2014-3569: OpenSSL no-ssl3 Option NULL Pointer Dereference Vulnerability CVE-2014-3572: OpenSSL Elliptic Curve Cryptographic Downgrade Vulnerability CVE-2015-0204: OpenSSL RSA Temporary Key Cryptographic Downgrade Vulnerability CVE-2015-0205: OpenSSL Diffie-Hellman Certificate Validation Authentication Bypass Vulnerability CVE-2014-8275: OpenSSL Certificate Fingerprint Validation Vulnerability CVE-2014-3570: OpenSSL BN_sql Function Incorrect Mathematical Results Issue Cisco will release software updates that address these vulnerabilities. Workarounds that mitigate these vulnerabilities may be available. This advisory is available at the following link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20150310-ssl Date: 22-SEP-2015 Find additional information in Cisco Security Advisories & Responses Known Bugs - Prime Optical Alert Type: Updated * Bug Id: CSCuo56276 Title: NE 9605 not alarmed on CTC network view cross launched from CPO Status: Open Severity: 3 Moderate Description: * Symptom: CTC network view displays no alarms on NE even if there are some active alarms. Conditions: The issue occurs when a NE in 9605 is connected to a NE in 9.8 software version cross launched from Prime Optical 9.8. Workaround: Launch CTC in standalone mode. Further Problem Description: Last Modified: 03-SEP-2015 Known Affected Releases: 9.8(0.3.2) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCui55677 Title: getTP retrieve LR_ENCRYPTION even if WSE is in RGN-10G mode Status: Fixed Severity: 3 Moderate Description: * Symptom: The getTP API retrieves the encryption layer when WSE card is configured in RGN-10G mode. Conditions: This issue occurs when you configure the WSE for RGN-10G operating mode. After configuration, the encryption layer should not be available for RGN-10G, and must be available only for the encryption layer for TXP-10G operating mode. Workaround: None. Last Modified: 16-SEP-2015 Known Affected Releases: * 10.0, 9.8(0.0.234) Known Fixed Releases: 10.0(0.0.309) Alert Type: Updated * Bug Id: CSCti09988 Title: The CreateTopologicalLink API returns an exception. Status: Fixed Severity: 3 Moderate Description: * Symptom: The CTM GateWay/CORBA CreateTopologicalLink API returns an exception when creating SONET/SDH manual links. However, the manual link is successfully created. Conditions: This problem occurs in the CTM GateWay/CORBA API interface. Workaround: Install the latest CTM R9.2 patch. For instructions, see the Release Notes for Cisco Transport Manager Release 9.2. Last Modified: 16-SEP-2015 Known Affected Releases: 9.2(0.360) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuc68299 Title: Unexpected error message opening circuit table on a group in Network Map Status: Fixed Severity: 3 Moderate Description: Symptom: error/warning message is displaying when open circuit table from network map for a group Conditions:group should have a note of type routers(CRS) Workaround:none Further Problem Description: If a group contains routers(CRS), and since it belongs to sonet and sdh application will show a error message when opening a cirucit table. This is resoved Last Modified: 16-SEP-2015 Known Affected Releases: * 9.6(0.128), 9.6(0.200.1), 9.6(3.1) Known Fixed Releases: 9.6(3) Alert Type: Updated * Bug Id: CSCua75296 Title: CPT: cannot set port parameters after NE re-synch Status: Fixed Severity: 3 Moderate Description: * Symptom: Cannot set Ethernet port parameters on CPT platform Conditions: the issue happens managing CPT devices after a NE re-syinc from the NE Explorer application Workaround: close and reopen the NE Explorer application Further Problem Description: Last Modified: 16-SEP-2015 Known Affected Releases: * 9.5(0.245), 9.6(0.1), 9.6(3.1), 9.8(0.0.239) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCup45370 Title: Wrong control when creating DVR circuits Status: Open Severity: 3 Moderate Description: * Symptom: Selecting the destination end as the source on the diversity circuit, an error message appears "Request a diversity from a circuit with different source" Conditions: User creates DVR circuits Workaround: Use the other end Further Problem Description: Last Modified: 16-SEP-2015 Known Affected Releases: 10.0(0.0.309) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCtx08126 Title: Exception thrown on getAllCurrentPMData on LR21 with LOP-v circuits Status: Fixed Severity: 3 Moderate Description: Symptom: CorbaGW getAllCurrentPMData returns exception on Layer Rate 21 when LOP-v circuits are present. Conditions: LOP-v circuits (for example VC12-2v) going trough an STM card (for example STM4_4) Workaround: None Last Modified: 16-SEP-2015 Known Affected Releases: * 9.2(0.472), 9.3(1), 9.5(1) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCsq96596 Title: If a GE_XP card has only one PPM, the SVLAN tab does not work correctly. Status: Fixed Severity: 4 Minor Description: * Symptom: In the NE Explorer for a GE_XP card, the SVLAN tab does not work correctly. Conditions: This problem applies to a GE_XP card with only one PPM. It does not apply to GE_XP cards that have at least two PPMs. Workaround: Install the latest CTM R8.0 or R8.5 patch. For instructions, see the Release Notes for Cisco Transport Manager Release 8.0 or 8.5. Last Modified: 16-SEP-2015 Known Affected Releases: 8.5(0.1) Known Fixed Releases: 8.0(0.907.3), 8.5(0.378.1) Alert Type: Updated * Bug Id: CSCua47343 Title: NE default values are out of range for cervino cards. Status: * Terminated Severity: 4 Minor Description: * Symptom: Some NE Defaults are out of range. Due to this, the Apply action fails. AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.LowTxPower AR-XP.opticalthresholds.client.oc3.cwdm.alarm.LowTxPower AR-XP.opticalthresholds.client.oc3.cwdm.alarm.HighRxPower AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.LowRxPower AR-XP.opticalthresholds.client.oc3.cwdm.alarm.LowRxPower AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.HighTxPower AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.HighRxPower AR-XP.opticalthresholds.client.oc3.cwdm.alarm.HighTxPower These are null 10x10G-LC.opticalthresholds.SFP-PORT.10gfibrechannel AR-MXP.opticalthresholds.trunk.4gfibrechannel.sm. AR-XP.opticalthresholds.trunk.4gfibrechannel.sm. Conditions: Node with 9.6 version upgraded from previous release Workaround: none Further Problem Description: Last Modified: 14-SEP-2015 Known Affected Releases: 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 9.6(0.1), 9.6(3.1), 9.8(0.0.1) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCua76080 Title: 100G-LC-C, M-CFP-LC, 10x10G_LC cards - failure setting NE Default values Status: * Terminated Severity: 4 Minor Description: Symptom: From Cisco Prime Optical client GUI, restore default value of any parameter from NE Defaults tab pane (changed before from CTC) and push the Apply button. => The operation fails. The following error message is returned: "Parameter AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.LowTxPower cannot be set. Verify that the value is in range. If it is not in range, choose a valid value from the range diplayed" Conditions: 100G-LC-C, 10x10G_LC, CFP-LC cards plugged in or pre-provisioned into a Cisco ONS 15454 M6 node. Workaround: None Further Problem Description: The error message refers to a wrong parameter: AR-MXP.opticalthresholds.client.oc3.cwdm.alarm.LowTxPower instead of the modified one: 100G-LC-C.otn.fecthresholds.otu4.standard.1day.UncorrectableWords Moreover, pushing the OK button to close the error message, the value changed does not restore to the original value and not even remains in bold character. The Problem exists on all 100G_LC_C, 10x10G_LC, CFP_LC cards and all their parameters. Last Modified: 14-SEP-2015 Known Affected Releases: 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 9.6(0.93), 9.6(3.1), 9.8(0.0.1) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCtx80567 Title: AR-XP cards: Empty GFP counters shown for Real-Time video payloads PM. Status: Terminated Severity: 5 Cosmetic Description: * Symptom: Some counters on AR_XP/AR_MXP real-time payload Performance Monitoring have got N/A value. Those counters are: - gfpStatsRxCRCErrors - gfpStatsRxSblkCRCErrors for real SDI_3G_VIDEO payload provisioned, and: - gfpStatsCHecRxMBitErrors - gfpStatsCHecTxMBitErrors for real ISC3_STP_1G payload provisioned, Conditions: Perform PM Query by Category operation on real AR_XP/AR_MXP cards having card mode configured and SDI_3G_VIDEO & ISC3_STP_1G payload provisioned. Workaround: None Further Problem Description: None Last Modified: 11-SEP-2015 Known Affected Releases: 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 9.5(0.159), 9.6(0.1), 9.6(3.1), 9.8(0.0.1) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCtr53746 Title: CorbaGW does not allow to create or get RMON thresholds Status: Open Severity: 6 Enhancement Description: * Symptom: RMON threasholds cannot be created or retrieved from CorbaGW. Conditions: CTM manages NEs equipped with C-series, E-series, G-series or any other card that supports RMON Thresholds. Workaround: RMON Thresholds can only be created and viewd from CTM GUI. Last Modified: 16-SEP-2015 Known Affected Releases: 9.2(0.435) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCue49103 Title: Circuit types displayed should be filtered based on the NE type Status: Open Severity: 6 Enhancement Description: * Symptom: Circuit types displayed should be filtered based on the NE type. Conditions: Workaround: Last Modified: 16-SEP-2015 Known Affected Releases: 9.6 Known Fixed Releases: Find additional information in Bug Search index.   2013 Cisco and/or its affiliates. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks