Cisco Notification Alert -Cisco NCS 6000 Series Core Router-01-Sep-2015 16:53 GMT

Feedback Sign Up Unsubscribe         Software Updates for Network Convergence System 6000 Series Routers Product Name: NCS 6008 - 8-Slot Chassis Software Type: IOS XR Software Maintenance Upgrades (SMU) Release Version: 5.2.3 Alert Type: New File File Name: ncs6k-5.2.3.CSCut10067.tar File Description: Hitless/Optional SMU,TE tunnel down when number of hops higher than 9 File Release Date: 18-AUG-2015 Alert Type: New File File Name: ncs6k-5.2.3.CSCut75386.tar File Description: ISSU/Reload/Optional SMU, bundlemge_ea restarted @ pidb_entry_lock File Release Date: 19-AUG-2015 Software Updates for Network Convergence System 6000 Series Routers Product Name: NCS 6008 - 8-Slot Chassis Software Type: IOS XR Software Maintenance Upgrades (SMU) Release Version: 5.2.1 Alert Type: New File File Name: ncs6k-sysadmin-5.2.1.CSCuo44710.tar File Description: Reload/Recommended SMU, Esd Process killed by SIGTERM when TGEN injects UNIcast pax w/ bad SA/DA File Release Date: 14-AUG-2015 Software Updates for Network Convergence System 6000 Series Routers Product Name: NCS 6008 - 8-Slot Chassis Software Type: IOS XR Software Maintenance Upgrades (SMU) Release Version: 5.2.4 Alert Type: New File File Name: ncs6k-5.2.4.CSCur86499.tar File Description: Hitless/Optional SMU,Power module I2C failure handling (V1 mostly) File Release Date: 31-AUG-2015 Find additional information in Software Downloads index. Software Updates for Network Convergence System 6000 Series Routers Product Name: NCS 6008 - 8-Slot Chassis Software Type: IOS XR Software Manager Release Version: 3.0 Alert Type: New File File Name: csm-3.0.zip File Description: CSM 3.0 File Release Date: 26-AUG-2015 Find additional information in Software Downloads index. Known Bugs - Network Convergence System 6000 Series Routers Alert Type: New Bug Id: CSCuv53674 Title: [5.2.5.3I SIT] install prepare got aborted after 90 mins(timeout) Status: Open Severity: 2 Severe Description: Symptom:Install prepare/activate blocks till timout happens Conditions:Install prepare/activate blocks till timout happens Workaround:Restart inst_agent in sysadmin on All RPs Last Modified: 29-AUG-2015 Known Affected Releases: 5.2.4.BASE, 5.2.5.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu37545 Title: Rib and bcdl processes shut down on standby after reinserting RP Status: Fixed Severity: 2 Severe Description: Symptom: process shutdown on standby after re-inserting RP Conditions: RP physical OIR and then insertion Workaround: Reload standby RP XR VM Further Problem Description: Here we see that DS service running on standby RP is learning about the endpoints from other nodes little late. Processes look for service end points and exit when they do not get them from DS. They repeat this on respawn and eventually go to shutdown state. Last Modified: 20-AUG-2015 Known Affected Releases: * 5.2.3.BASE, 5.2.4.BASE Known Fixed Releases: 5.2.5.12i.BASE, 6.0.0.8i.BASE Alert Type: New Bug Id: CSCut19134 Title: ISSU-XR: RP1 VM stuck at Unknown Band in load phase Status: Fixed Severity: 2 Severe Description: Symptom:For ISSU case: ISSU will be aborting due to one of the v2 LC vm going down Issu cleanup wont be clean the v2 vms (thats the sympom). For all other reload cases: -> XR LC VM will reload due to below reason and also XR VM on RP will not be coming up properly: VM_REQUESTED_UNGRACEFUL_RELOAD:Headless SDR-No Boot Server Node This is because the lead information from the RP will not be propagated to other nodes . Run the below command from shell on RP cmp_dbg -s pm This will show 0xffffffff for both the Lead and back up lead. Conditions:issue (where LC VM won't come up) happens during fresh boot of the system. It could be -> Reload of all XR VMs -> Install activate / deactivate of reload smu -> Fresh boot up of the system ->xR ISSU Workaround:Steps: ISSU case: hw mod reload of v2 xr vm Other reload cases: 1)Restarting the CM on RP belonging to SDR lead pair (often it is running on 0/RP0) should recover all the nodes including LC's (if it happens to be CM system lead). 2) If it doesn't recover, please run this command from calvados prompt: sdr default-sdr location all start More Info:->Information regarding case where LC won't come up: Race condition could occur in cmp which will cause right notifications to go out with stale identifier. Because of the same, CM is dropping the lead notification sent out by CMP on 0/RP0 since it was with stale identifier. This is turn will result in lead information not getting propagated to the other nodes. LC will wait for 10 mins to get the lead info and since it couldn't get it , it will go down due to "No Boot Server Node condition. Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.3.BASE Known Fixed Releases: 5.2.5.8i.BASE, 6.0.0.6i.BASE Alert Type: New Bug Id: CSCuv34470 Title: NCS6K ISSU DT: OSPF/BGP procols keep flapping on bundle interface Status: Terminated Severity: 2 Severe Description: Symptom: The router is not receiving traffic from peer routers. Also there seems to be packets drops on the NPU side on the line card. Conditions: Workaround: None Further Problem Description: Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCup27504 Title: TCP crash @ socket_async_evm_id2session Status: Open Severity: 2 Severe Description: Symptom: In rare occasions, customer may see an intermittent TCP Crash after the TCP process is restarted Conditions: Seen only intermittently when there is a restart of the TCP process (and TCP process restart will be a rare occurrence) Workaround: No workaround, the process will recover automatically Further Problem Description: Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.1.BASE, 5.2.1.ROUT Known Fixed Releases: Alert Type: Updated * Bug Id: CSCus15240 Title: panini issu: BFD flap issue - Pinning FIAT to vCPU#0 Status: Fixed Severity: * 2 Severe Description: Symptom: BFD Flaps are seen Conditions: Whenever a slice reset is triggered. Workaround: Unpin the FIA driver process from vCPU1. Further Problem Description: BFD flaps are seen during slice reset condition. This is due to FIA driver which hogs the CPU and hence BFD did not get time to execute. The spike in FIA driver CPU usage is expected during slice reset as it resets the AMBA asic. Last Modified: 18-AUG-2015 Known Affected Releases: * 5.2.3.BASE, 5.2.4.BASE Known Fixed Releases: 5.2.5.2i.BASE, 6.0.0.9i.BASE Alert Type: Updated * Bug Id: CSCuv34332 Title: The Link error count increases unders show asic-errors npu <> Status: Fixed Severity: 2 Severe Description: Symptom: When the port is no shut and no fibers are attached to the ports the ports cause increase in the Link error count. Conditions: The port should in no shut state and no fibers are connected to the port. Workaround: The ports should be admin shut which will not increase the count. Further Problem Description: NA Last Modified: 17-AUG-2015 Known Affected Releases: 5.2.1.CE Known Fixed Releases: * 5.2.5.22i.BASE, 6.0.0.11i.BASE Alert Type: Updated * Bug Id: CSCuu72972 Title: Hotplug not received for one asic causing S2 to reload second time Status: Fixed Severity: 2 Severe Description: Symptom: Sometimes, there's some bad state in host side. Or ESD takes Fabric card driver card slot Conditions: Especially on big switch, there's NTSW happen frequently. Workaround: Further Problem Description: Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.19i.BASE, 5.2.5.5i.BASE, 6.0.0.11i.BASE Alert Type: Updated * Bug Id: CSCuv63655 Title: Deactivating issu smu(s) router stuck in prepare phase Status: Fixed Severity: 2 Severe Description: Symptom: cannot deactivate issu smu using issu keyword , apparently router stuck in prepare phase Conditions: router having a few active issu smu's Workaround: router reload Further Problem Description: Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.4.BASE, 5.2.5.BASE Known Fixed Releases: * 5.2.5.23i.BASE Alert Type: Updated * Bug Id: CSCut24831 Title: HB failure between RP0 XR vm and RP1 calvados rvm_mgr Status: Fixed Severity: 2 Severe Description: Symptom: rvm_mgr will reload the card when calv VM on that particular card goes down. show reboot history on that card, we will see rvm_mgr reloading the card due to peer service vm and admin vm down. Conditions: This issue will be observed only on MC 1. calv ISSU 2. back to back reload of calv VM on 0/RP0 followed by 0/RP1 Workaround: card will reload and then it recovers itself Further Problem Description: when on phase 1: 0/RP1 is reload and back, but not fully recover and from 0/RP0 XR Vm send pkt to 0/RP1 calv side, and it will go for a loop and finally register in its own switch FDB. Add FDB port 34 wrong entry in 0/RP0 switch FDB. Then when 0/RP0 calv VM goes down on phsae2, switch has wrong FDB entry and dead when esd is down. So pkt will never go forward to 0/RP0 XR VM Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.6i.BASE, 6.0.0.11i.BASE Alert Type: Updated * Bug Id: CSCus64833 Title: please remove 1 minute timer in the PD mcast mrib code Status: Fixed Severity: 2 Severe Description: * $$IGNORE Ignored 1 minute timer during ISSU run phase and committed the code Symptom: you may see 1 minute timer in the PD mcast mrib code on release 5.2.3 on platform NCS6K. Conditions: ISSU Workaround: n/a Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.3.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu59301 Title: consecutive pita HR causes driver crash Status: Fixed Severity: 2 Severe Description: Symptom: driver crash Conditions: Consecutive HR's on pita Workaround: reload LC Further Problem Description: Consecutive HR's on pita , driver crashes Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.12i.BASE, 5.3.2.19i.BASE, 5.3.3.5i.BASE, 6.0.0.6i.BASE Alert Type: Updated * Bug Id: CSCuv24857 Title: show tech broken in XR with location option Status: Fixed Severity: 2 Severe Description: Symptom: As part of node list generation in showtech infra, the format of the node in the list and the location (argument passed in cli) were different. Which resulted in showtech cli failure. Conditions: its specific to 525 lineup. Workaround: the issue was fixed by making the format same for the above mentioned node comparison. Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.19i.BASE, 5.2.5.5i.BASE, 6.0.0.10i.BASE Alert Type: Updated * Bug Id: CSCuu07648 Title: bundlemgr_adj stuck in mutex by rdm_client_write after config applied Status: Fixed Severity: 2 Severe Description: Symptom: We ran into two slightly different issues (bundlemgr_adj proc blocked) 1. Processes blocked forever on config apply two times successively 2. Processed getting blocked for few mins on config apply, and recovers on their own. Conditions: steps to hit this issue: - Applied the config file. The break-out interfaces are then reated - Loaded the config file again to add the config for these break-out interfaces Workaround: no Further Problem Description: Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.4.BASE, 5.2.5.BASE Known Fixed Releases: * 5.2.5.12i.BASE, 5.3.2.19i.BASE, 5.3.3.5i.BASE, 6.0.0.6i.BASE Alert Type: New Bug Id: CSCuv96164 Title: fabric planes going to MCAST down when adding new rack s13's Status: Open Severity: 2 Severe Description: Symptom: Fabric planes going to MCAST down when adding new rack s13's in the following scenarios 1) With fabric plane 0 shut down with LC's in new LCC, 2) Fabric plane 0 shut down without LC's in new LCC, 3) With 2/fc0 insertion without doing fabric plane shut and with LC's in new LCC, 4) With 2/fc0 insertion without doing fabric plane shut and without LC's in new LCC. Conditions: Fabric planes going to MCAST down when adding new rack s13's in the following scenarios 1) With fabric plane 0 shut down with LC's in new LCC, 2) Fabric plane 0 shut down without LC's in new LCC, 3) With 2/fc0 insertion without doing fabric plane shut and with LC's in new LCC, 4) With 2/fc0 insertion without doing fabric plane shut and without LC's in new LCC. Workaround: none Further Problem Description: Fabric planes going to MCAST down when adding new rack s13's in the following scenarios 1) With fabric plane 0 shut down with LC's in new LCC, 2) Fabric plane 0 shut down without LC's in new LCC, 3) With 2/fc0 insertion without doing fabric plane shut and with LC's in new LCC, 4) With 2/fc0 insertion without doing fabric plane shut and without LC's in new LCC. Last Modified: 29-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu63975 Title: Memory leak in inventory lib Status: Fixed Severity: 2 Severe Description: Symptom: Memory leak is seen in inventory lib. Conditions: 524 image on NCS6K Workaround: NA Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.14i.BASE, 6.0.0.10i.BASE Alert Type: New Bug Id: CSCuv44806 Title: newly created p2mp tunnels use the higher cost path Status: Fixed Severity: 2 Severe Description: Symptom: New p2mp tunnel expanded on ABR could using the higher cost path if that path had been preferred previously before topology change. Conditions:The issue only happen for inter-area p2mp tunnel expanded on ABR with path which has higher cost but had been preferred previously due to different path calculation constrain. Workaround:Re-setup the tunnel. More Info: Last Modified: 29-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: 5.2.5.20i.MPLS, 6.0.0.11i.MPLS Alert Type: New Bug Id: CSCuu58208 Title: Observe %INFRA-ESD-3-PORT_AUTO_TUNE_FAILURE msgs after reloading SW card Status: Fixed Severity: 2 Severe Description: Symptom:The following alarms were reported in Sysadmin from "show alarms brief" on an NCS6K MC system with the combo switch/SC cards on a FC F0/SW0/F_SW0/112 major ethernet 06/20/15 21:11:17 Switch port auto tune failure. F0/SW0/F_SW0/116 major ethernet 06/20/15 21:11:17 Switch port auto tune failure show controller switch mlap reachable doesn't list the F-SW card on the other side of port 112 and 116 of thw F-SW reporting the above errors. Conditions: This may happen after FCC rack reload on an NCS 6008 Multichassis router that is using the combination Shelf Controller switch cards when running IOS XR software version 5.2.4 Workaround: Reload the SW card missing in show controller switch mlap reachable. Reload the other SW card after the first one comes back online. Last Modified: 20-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: 5.2.5.20i.BASE, 6.0.0.10i.BASE Alert Type: Updated * Bug Id: CSCuq31566 Title: telnetd crash when receiving malformed telnet packet Status: Fixed Severity: 2 Severe Description: * Symptoms: A vulnerability in telnetd process of Cisco IOS XR could allow an unauthenticated, remote attacker to cause a reload of the affected service. The vulnerability is due to improper processing of malformed telnet packet directed to a device configured to process such packets to itself. An attacker could exploit this vulnerability by sending a malformed telnet packet to a device that is configured to accept telnet connections to itself and process them for remote management. An exploit could allow the attacker to cause a reload of the affected service. Conditions: Cisco IOS XR device is configured to accept telnet connections for remote management. Workaround: None. PSIRT Evaluation: The Cisco PSIRT has assigned this bug the following CVSS version 2 score. The Base and Temporal CVSS scores as of the time of evaluation are 5/4.1: http://tools.cisco.com/security/center/cvssCalculator.x?vector=AV:N/AC:L/Au:N/C:N/I:N/A:P/E:F/RL:OF/RC:C&version=2.0 CVE ID CVE-2015-0776 has been assigned to document this issue. Additional information on Cisco's security vulnerability policy can be found at the following URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html Last Modified: 11-AUG-2015 Known Affected Releases: 5.0.1.BASE Known Fixed Releases: 4.3.4.SP8, 5.3.1.10i.FWDG, 6.0.0.5i.FWDG Alert Type: New Bug Id: CSCuv31480 Title: ISSU aborts due to excessive TCP retransmissions on standy RP node Status: Open Severity: 2 Severe Description: Symptom: The following error log would be observed along with XR-ISSU operation being aborted due to bgp process restart bgp[1047]: %ROUTING-BGP-3-NBR_NSR_DISABLED : NSR disabled on neighbor 100.20.1.1 due to 'ip-tcp' detected the 'warning' condition 'NSR is down because the retransmission threshold exceeded (probably because downstream RP is not healthy)' RP/0/RP0/CPU0:Jul 10 20:07:06.356 : issudir[375]: %INSTALL-ISSUDIR-1-OPERATION_ABORT : ISSU Aborted : issu-mgr reported proc restart Conditions: The issue would be observed when XR-ISSU RUN phase is in progress and bgp is configured on the system. Due to which XR-ISSU operation aborts. Workaround: None. Restart the ISSU operation after clean-up. Further Problem Description: When a XR-ISSU operation on a NCS6k system is triggered with bgp enabled on the system during the ISSU-RUN phase the operation gets aborted due bgp process restart. The bgp process restart is expected when there is a data path issue which is being pointed out by the syslog "TCP retransmissions threshold exceeded" Last Modified: 31-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuv60247 Title: ISSU SMU activation aborted due to mpls_ldp sync failure during load pha Status: Terminated Severity: 2 Severe Description: Symptom: issu smu load phase aborted due to mpls_ldp sync failure Conditions: issu smu activation Workaround: none Further Problem Description: Last Modified: 19-AUG-2015 Known Affected Releases: 5.2.4.MPLS Known Fixed Releases: Alert Type: Updated * Bug Id: CSCum25026 Title: Incorrect Calvados mgmt port LED status Status: * Other Severity: 3 Moderate Description: Symptom: LED status of sysadmin management interface shows incorrect behavior where the LED is always ON when the interface is administratively shutdown. Conditions: Administratively shutdown the sysadmin management interface Workaround: Further Problem Description: Last Modified: 27-AUG-2015 Known Affected Releases: 5.0.1.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuv03631 Title: ESD keep trying registering the SFP aid every 200 msec and failing Status: Fixed Severity: 3 Moderate Description: ESD process esd-F-SW1 on SC, which don't have hw control of F-SW1 keep registering SFP eid every 200 msec Symptom: these can be seen from trace Conditions: after boot up. on the esd big switch process which dont have HW in FCC Workaround: no workarounds Further Problem Description: we have a logic in esd which every process from child thread will register with CPMI, but we have a condition to check SFP eid status every period. fix that period and also only allow the process which has the real hw can do retry on registering the unregistered SFP eid Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.1.CE Known Fixed Releases: 5.2.5.23i.BASE Alert Type: Updated * Bug Id: CSCuv72074 Title: NCS6K MC alarm F-SW is missing an expansion port connection after OIR Status: Fixed Severity: 3 Moderate Description: Symptom: Active alarm on F-SW missing expansion port connection to one or more RP-SW/SC-SW switches. show controller switch statistics location shows some ports as Unknown Conditions: SC replacement/OIR/router reload Workaround: esd process reload on affected card Further Problem Description: The port remain uninitialized and affects CE connectivity HA Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.23i.BASE Alert Type: Updated * Bug Id: CSCur77305 Title: panini_spio_fill_bdl_mbr_info floods in v2-A during load phase Status: Fixed Severity: 3 Moderate Description: Symptom:In NCS6000 release 5.2.3, following syslog might be seen when interface with LLDP comes up : lldp_agent[1097]: vimi decode: mbr_count: 1, mbr_ifh: 0x3000028, mbr_lon: 0, mbr_weight: 1, mbr number: 0 lldp_agent[1097]: panini_spio_fill_bdl_mbr_info: mbr 0, ifh :0x3000028, pic 0x111, status :0 lldp_agent[1097]: panini_spio_fill_bdl_mbr_info: Success getting uidb_index for mbrifh: 0x3000028, uidb_index :0x1 Conditions:interface comes up with LLDP Workaround:none available, cosmetic Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.3.BASE Known Fixed Releases: * 5.2.5.22i.BASE, 5.2.5.23i.BASE, 5.3.1.10i.BASE, 6.0.0.5i.BASE Alert Type: Updated * Bug Id: CSCuv60589 Title: Overrun counters after breakout to 10G with traffic on that slice Status: Fixed Severity: 3 Moderate Description: Symptom: Overrun counters after breakout Conditions: Overrun counters after breakout to 10G with traffic on that slice Workaround: No workaround Further Problem Description: Overrun counters after breakout to 10G with traffic on that slice. Connected back to back 100G cable Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.23i.BASE Alert Type: Updated * Bug Id: CSCuv58272 Title: Npu asic errors while collecting sh tech qos platform Status: Fixed Severity: 3 Moderate Description: Symptom: ASIC errors will be seen while collecting sh tech qos platform Conditions: ASIC errors will be seen while collecting sh tech qos platform Workaround: none Further Problem Description: ASIC errors will be seen while collecting sh tech qos platform Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.4.ROUT Known Fixed Releases: * 5.2.5.23i.BASE Alert Type: Updated * Bug Id: CSCuq63184 Title: NGN:add/remove random-detect in policy causes rate counters stop working Status: Fixed Severity: 3 Moderate Description: Symptom: Rate counters in class-map of an output policy are not updating on NCS6K interface Conditions: add/remove random-detect cli couple of times from a class of a policy applied on an interface Workaround: none. Doesn't affect functionality. Further Problem Description: Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.1.BASE Known Fixed Releases: * 5.2.5.23i.BASE Alert Type: New Bug Id: CSCuv91541 Title: sdr_instmgr leaks memory due to repeated activate and de-activate pkg Status: Open Severity: 3 Moderate Description: Symptom: memory leaks with repeated act/de-act pks Conditions: repeated act/de-act pks Workaround: none Further Problem Description: Last Modified: 26-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuv01768 Title: Inconsistent LED/envmon output on NCS6K calvados Status: Fixed Severity: 3 Moderate Description: Symptom: Inconsistent LED/envmon output on NCS6K calvados Conditions: Right after system reload Workaround: None Further Problem Description: Inconsistent LED/envmon output on NCS6K calvados after system reload. Last Modified: 25-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.22i.BASE, 6.0.0.12i.BASE Alert Type: New Bug Id: CSCum21353 Title: 521: NCS6K sends LLDP frames with wrong ipv4 interface address Status: Fixed Severity: 3 Moderate Description: Symptom: Management Addresses: IPv4 address: 1.1.15.55 <<< wrong value IPv6 address: 2002::55:15:1:1 <<< correct value Management Addresses: IPv4 address: 204.98.28.172 <<< wrong value IPV4 address: 172.28.98.204 <<<<< correct value Conditions: show lldp neighbor detail observes reversed IP-address. Workaround: none. Further Problem Description: Last Modified: 21-AUG-2015 Known Affected Releases: 5.2.1.BASE Known Fixed Releases: 5.2.1.25i.FWDG, 5.2.2.13i.FWDG, 5.3.0.1i.FWDG Alert Type: New Bug Id: CSCuv59526 Title: Version string is not read correctly in BIOS 14.05 Status: Fixed Severity: 3 Moderate Description: Symptom: Version string is not read correctly in BIOS 14.05 Conditions: in NCS6k on latest image which has BIOS of 14.05 , has this issue where backup bios can be printed as garbage number Workaround: None Further Problem Description: Last Modified: 20-AUG-2015 Known Affected Releases: 5.2.5.ADMIN Known Fixed Releases: 5.2.5.22i.BASE Alert Type: Updated * Bug Id: CSCuu34467 Title: npu_driver fails to capture logs needed to debug why NPU asic reset Status: Fixed Severity: 3 Moderate Description: Symptom: The npu_driver process may fail to capture logs needed to debug why NPU asic reset. Conditions: This issue is seen on a NCS6K router booted with Cisco IOS XR version 5.2.5-08i. Workaround: None Further Problem Description: Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.13i.BASE, 5.3.2.19i.BASE, 5.3.3.5i.BASE, 6.0.0.6i.BASE Alert Type: Updated * Bug Id: CSCuu92228 Title: Issues in npu driver while installing ucode smu's Status: Fixed Severity: 3 Moderate Description: Symptom:A new version of microcode that is distributed via SMU will fail to load properly. Conditions:Installation of a microcode SMU after a previous installation of a microcode SMU.(i.e, the 2nd microcode SMU installed on a system may trigger this issue). Workaround:a) Reload the affected Linecard. b) Reload the system. More Info:Once the linecard and/or system are reloaded,the loaded microcode SMU will function normally. Last Modified: 13-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: * 5.2.5.2i.BASE, 5.3.2.19i.BASE, 5.3.3.5i.BASE, 6.0.0.9i.BASE Alert Type: Updated * Bug Id: CSCul06201 Title: Calv: CLI redirection write vulnerability to overwrite arbitrary file Status: Terminated Severity: 3 Moderate Description: * Symptoms: CLI redirection can sometimes allow for arbitrary file overwrite. Conditions: None. Workaround: None. PSIRT Evaluation: The Cisco PSIRT has assigned this bug the following CVSS version 2 score. The Base and Temporal CVSS scores as of the time of evaluation are 1.7/1.4: http://tools.cisco.com/security/center/cvssCalculator.x?vector=AV:L/AC:L/Au:S/C:N/I:P/A:N/E:F/RL:OF/RC:C&version=2.0 No CVE ID has been assigned to this issue. Additional information on Cisco's security vulnerability policy can be found at the following URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html Last Modified: 11-AUG-2015 Known Affected Releases: 5.2.1.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu77444 Title: Install remove inactive <host> VM should be added in Admin VM Status: Open Severity: 3 Moderate Description: * Symptom: Install remove inactive VM should be added in Admin VM Conditions: On NCS-6k , host VM deletion from the repository is not supported which is requested in here Workaround: None Further Problem Description: Last Modified: 10-AUG-2015 Known Affected Releases: 5.2.5.ADMIN Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu95426 Title: Power Tray alarms on an NCS 6008 Status: Fixed Severity: 3 Moderate Description: Symptom: An NCS 6008 router may display power tray and power shelf alarms after a router reload. Conditions: This may happen on an NCS 6008 multi-chassis router running IOS XR version 5.2.4 when reloading the entire router Workaround: Restart the ccc_driver process on the affected node from Sysadmin. Example if the affected node is F1/SC0: sysadmin-vm:F0_SC0# process restart ccc_driver location F1/SC0 Further Problem Description: Example of "show alarms brief" output from Sysadmin: F1/PT0 major environ 06/22/15 14:13:53 Power tray undetected. F1 major environ 06/22/15 14:13:56 Power Shelf redundancy lost. Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.2i.BASE, 6.0.0.10i.BASE Alert Type: Updated * Bug Id: CSCuu42410 Title: vi_config_replicator crash observed after system reload Status: Fixed Severity: 3 Moderate Description: Symptom: vi_config_replicator crash observed on standby node upon system reload. Conditions: On system with virtual interface configuration the process vi_config_replicator process crashed while standby node was coming up after a system reload. The process recovers on process restart following the crash. Workaround: none Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.13i.BASE, 5.3.2.12i.BASE, 6.0.0.10i.BASE Alert Type: Updated * Bug Id: CSCuv14100 Title: sdr_mgr NM needs to check on the shutoff reason of the XR VM Status: Fixed Severity: 3 Moderate Description: Symptom: After shutting down a xr vm through sysadmin CLI, restart system scope shelf_mgr process, then CLI-shutoff xr vm will come out of shut state Conditions: If system scope shelf_mgr process restarts and some xr vms are in CLI-shutoff state, this issue will happen. Workaround: Shut it again if it is desired or do not restart the system scope shelf_mgr process Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.5.ADMIN Known Fixed Releases: * 5.2.5.19i.BASE, 6.0.0.10i.BASE Alert Type: Updated * Bug Id: CSCuu18162 Title: NGN:snmpwalk on lldpLocalSystemData returns even the down interfaces Status: Fixed Severity: 3 Moderate Description: Symptom: snmpwalk on lldpLocalSystemData shows both the UP and Down interfaces. Its supposed to show only UP interfaces in it. Conditions: run a snmp walk on oid 1.0.8802.1.1.2.1.3 on NCS6K 5.2.4.12i with lldp enabled. Workaround: None Further Problem Description: Last Modified: 07-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: * 5.2.5.9i.FWDG, 5.3.2.14i.FWDG, 6.0.0.10i.FWDG Alert Type: New Bug Id: CSCuv75433 Title: MFR_FAULT_LOG_STORE command on 3882 gives wrong output Status: Open Severity: 3 Moderate Description: Symptom:while Peek/Poke on LTC3882 the following is observed MFR_FAULT_LOG_STORE(0xea): ERROR (failed to execute I2C MBOX via Ethernet (Transaction execution failed on Eth accessed MBOX at slot=8 exe)) Conditions:This is an internal command to debug, and the issue is with just display. Workaround:This is an internal command to debug, and the issue is with just display, hence it will not affect anyone. More Info:This is an internal command to debug, and the issue is with just display, hence it will not affect anyone. Last Modified: 31-AUG-2015 Known Affected Releases: 6.2.0.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCut58659 Title: 'confdConfig cli style' changes from -c to -j Status: * Terminated Severity: 3 Moderate Description: Symptom: The Confd configuration type 'confdConfig cli style' changes from -c to -j. This change affects the CLI prompt and various other cli cmd options. Conditions: The conditions which trigger this issue are not known yet and will be added soon. Workaround: Once the issue is hit, use the config_manual_restore.sh in /opt/cisco/calvados/script to manually restore the correct config from /misc/config/confd/ascii_backup. You might have to log out and log back in to the calvados VM for the changes to take effect. /opt/cisco/calvados/script/confd_manual_restore.sh config.cfg Further Problem Description: Last Modified: 31-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuu22097 Title: Failed to find prepare context after phase 1 of OCU. Status: Fixed Severity: 3 Moderate Description: Symptom: On NCS6k "install activate issu" fails with an error message like the following example: sysadmin-vm:0_RP0# Prepare context not found for Location 0/1. Please verify node location. Conditions: This problem may be triggered when a LC is removed from a running NCS6k system and not inserted again and an issu upgrade is performed. Workaround: Not available More Info: One can recover from the situation by restarting the ins_mgr process on the admin plane. Please execute install prepare clean before. Last Modified: 28-AUG-2015 Known Affected Releases: 5.2.5.ADMIN Known Fixed Releases: 5.2.5.11i.BASE Alert Type: New Bug Id: CSCuv93189 Title: OCU activate proceeding even after prepare phase is aborted. Status: Fixed Severity: 3 Moderate Description: Symptom: OCU aborts after it timeout to get notification. Conditions: Below are the steps which lead to this issue. 1 . Reloaded LC using hw-module command. 2. Issued cal-ocu even before LC comes up. 3. OCU got aborted with error "Install operation 36 failed (Some nodes failed)? in prepare phase. 4. But still ocu proceeded with phase one "Tue Aug 25 09:50:17 2015 Calvados ISSU phase one Initiated? 5. Next consecutive ocu is also failing with error"Tue Aug 25 09:56:16 2015 ISSU operation got timed out.To recover system, please reload system? Workaround: Need to restart active inst_mgr process. Further Problem Description: Last Modified: 28-AUG-2015 Known Affected Releases: 5.2.5.ADMIN Known Fixed Releases: Alert Type: New Bug Id: CSCuv88053 Title: dhcp crash and tracebacks on config it on NCS-6k Status: Open Severity: 4 Minor Description: Symptom: dhcp crash and tracebacks on config it on NCS-6k ( Spirit-based XR ) on config dbcp which is NOT yet supported as I will be supported in Rel 6.1 onward Conditions: We have packaged DHCP in the image to avoid the tracebacks which will print on Router Reload even if we do not have dhcp config , so we cannot unpackage it to fix it as it will then cause tracebacks and false alarms on every Router Therefore , please do not config dhcp on NCS-6k until it is officially supported and this is targeted for Release 6.1 for now Workaround: Further Problem Description: Last Modified: 20-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuo12376 Title: Failed to resolve linkpoint 'clear controller' log message @NCS6K Status: Open Severity: 4 Minor Description: * Symptom: On an NCS System reload, on 5.0.1 FCS code, the following message is logged. RP/0/RP0/CPU0:Apr 3 17:55:58.521 : parser[133]: Failed to resolve linkpoint 'clear controller' specified in chainname 'clear_cpuctrl' in '/pkg/parser/cpuctrl_cmds.parser' file. Conditions: This occurs when an NCS system is reloaded on IOS XR version 5.0.1 software Workaround: None Further Problem Description: Ignore the erroneous log message. It does not affect any functionality Last Modified: 28-AUG-2015 Known Affected Releases: 5.2.1.CE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCuu99122 Title: Umbrella fix for ISSU upgrade Status: * Fixed Severity: 4 Minor Description: * Symptom: Sysadmin ISSU upgrade from release 5.2.3 to 5.2.4 may fail. Conditions: Sysadmin ISSU software upgrade Workaround: USB boot to base image Further Problem Description: Last Modified: 31-AUG-2015 Known Affected Releases: 5.2.3.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuv66416 Title: Inconsistency in install logs while removing pkgs using special chars. Status: Open Severity: 4 Minor Description: Symptom: Logs are getting appended to previous operation while trying to remove packages using special chars. Conditions: Workaround: No functionality impact. but logs will be misleading. Further Problem Description: Last Modified: 20-AUG-2015 Known Affected Releases: 5.2.5.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuv96155 Title: Need NC6-PCM to return operational state via SNMP Status: Open Severity: 6 Enhancement Description: Symptom: NC6-PCM is a FRU, and has corresponding MIB entry. Right now, it returns a value of 0. Need to enable NC6-PCM to report its operational statue via SNMP so customer can monitor the module in production. https://search-prd.cisco.com/topic/news/cisco/eng/cs-ncs6k/dsc05274.html Conditions: NC6-PCM is a FRU, and has corresponding MIB entry. Right now, it returns a value of 0. Need to enable NC6-PCM to report its operational statue via SNMP so customer can monitor the module in production. https://search-prd.cisco.com/topic/news/cisco/eng/cs-ncs6k/dsc05274.html Workaround: none Further Problem Description: NC6-PCM is a FRU, and has corresponding MIB entry. Right now, it returns a value of 0. Need to enable NC6-PCM to report its operational statue via SNMP so customer can monitor the module in production. https://search-prd.cisco.com/topic/news/cisco/eng/cs-ncs6k/dsc05274.html Last Modified: 27-AUG-2015 Known Affected Releases: 5.2.1.BASE Known Fixed Releases: Alert Type: New Bug Id: CSCuv90993 Title: Support for 'exception pakmem' in NCS6k Status: Open Severity: 6 Enhancement Description: Symptom: support for 'exception pakmem' in NCS6k Conditions: support for exception pakmem in NCS6k Workaround: Further Problem Description: Last Modified: 24-AUG-2015 Known Affected Releases: 5.2.4.BASE Known Fixed Releases: Alert Type: Updated * Bug Id: CSCui56330 Title: XR parser show tech need to migrate to parallel show tech infra Status: Open Severity: 6 Enhancement Description: * Symptom: I believe parser is still using classic show tech infra. Have them migrate to parallel show tech infra. If there isn't any tracking ddts, please file one against parser. Confirm with parser team. Conditions: show tech parser Workaround: N/A More Info: Last Modified: 28-AUG-2015 Known Affected Releases: 5.0.0.BASE Known Fixed Releases: Find additional information in Bug Search index.   2013 Cisco and/or its affiliates. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks