| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv16808 | Title: | ASR9K satellite IC links not appear in ASR9K 5.3.1 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
ASR9K satellite IC links not appear in ASR9K 5.3.1.
Tested in Satellite ring and cascasing topologies
Conditions:
1. Model ASR9K SW version 5.3.1 with satellite
Workaround:
Further Problem Description:
|
|
Last Modified: | 01-FEB-2016 |
|
Known Affected Releases: * | 4.2(0X)DP1505.0.622, 4.2(2)DP1511.0.742 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus75245 | Title: | ASR9K satellite Host roll is not updated after IC port down |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
ASR9K "Satellite Host roll" is not updated after IC port down.
The Active satellite stay active even that the satellite is not plug any more to the ASR9K
Conditions:
1. Model 2 ASR9K with 3 satellites on ring topology
2. Shutdown IC port of one of the satellite
Workaround:
Not Applicable
Further Problem Description:
|
|
Last Modified: | 04-FEB-2016 |
|
Known Affected Releases: | 4.2(0.522), 4.2(1) |
|
Known Fixed Releases: * | 4.2(2), 4.2(2.0)PP2 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux96148 | Title: | CRS8S VNE missing most of entries in IPv6 BGP Label Routing Table |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Missing most of IPv6 BGP Label Routing Table entries in the inventory. Massive number of IndexOutOfBoundsException errors orifinated in CiscoRouterXRIPv6BGPLabelwithRouteParser class
Conditions:
Configuration of IPv6 BGP neighbors in CRS8S, version 4.1.1.
Workaround:
There is no workaround for this issue.
Further Problem Description:
|
|
Last Modified: | 05-FEB-2016 |
|
Known Affected Releases: * | 4.2(2)DP1603.0.791, 4.2(3)DP0.0.812, 4.3(0X)DP0.0.812 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux53448 | Title: | InfoBright is flooding avm25 log and causing it to crash |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
floods of
java.sql.SQLException: Could not commit with auto-commit set on
in avm 25 log and even crash of avm 25
Conditions:
InfoBright installed. High event rate.
Workaround:
stop InfoBright.
Further Problem Description:
|
|
Last Modified: | 08-FEB-2016 |
|
Known Affected Releases: | 4.2(1.0)PP1, 4.2(2.0)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy31325 | Title: | ClassNotFoundException: com.sheer.imo.INewFilterData |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
failing to clear /clear and remove bulk of tickets in vision
Conditions:
unknown
Workaround:
reopen client
Further Problem Description:
|
|
Last Modified: | 17-FEB-2016 |
|
Known Affected Releases: | 4.1(0.1)PP2 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut65781 | Title: | Null pointer in multiple java files causing tickets to be not generated. |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Tickets are not generated. Also null pointer exception in AVM 11 log file.
Conditions:
Unknown.
Workaround:
None. Need to evaluate on cases by case basis and provide a fix.
Further Problem Description:
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 3.10(0)PP5, 4.1, 4.2, 4.2(1), 4.2(2) |
|
Known Fixed Releases: * | 4.2(1.0)PP1, 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux71052 | Title: | Failure in taking recording of Juniper when community has '/' char |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Failure in taking recording of Juniper when community has '/' char
Conditions:
Juniper devices with '/' in community
Workaround:
Change community and remove '/
Further Problem Description:
Need to check if it works fine with Cisco devices
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2(0.1)PP5, 4.2(2.0)PP3 |
|
Known Fixed Releases: * | 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy11542 | Title: | OSPF neighbor down ticket is not cleared |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
OSPF neighbor ticket is not cleared
Conditions:
OSPF neighbor down events corresponding to ospfNbrState - exchangeStart(5) are not correlated to state Full(8).
Workaround:
Further Problem Description:
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux98298 | Title: | CCM Editing compliance manager job very slow taking over 2 min |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Editing a compliance manager job is very slow
Conditions:
there are more than ~3000 total devices in Prime network /NCCM
Workaround:
schedule a new job, instead of editing a job.
Further Problem Description:
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2(1) |
|
Known Fixed Releases: * | 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux62860 | Title: | Backup of 7609 failing error: "Data size does not match expected value" |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Backup fails due to error "Data size does not match expected value"
Conditions:
7609
Workaround:
Remove the old entry from DB using the procedure similar to the link below:
https://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=622732697#note47
Further Problem Description:
None
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCur62017 | Title: | PN - Patch installation in suite mode leaves PNIL down |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Following the successful installation of a PN Point patch on a system with PN Integration Layer running, the PN Integration Layer is stopped and never restarted by the install process.
Conditions:
Patch installation flow with PNIL installed and running.
Workaround:
Must manually start the PN integration layer.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.1(0)PP3, 4.1(0)PP4, 4.2(0.1)PP2, 4.2(2) |
|
Known Fixed Releases: * | 4.1(0.1)PP1, 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux62955 | Title: | Backup of 7609 failing error: UpdateOutOfSync |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
7609 Backup failing due to UpdateOutOfSync error
Conditions:
7609
Workaround:
Remove the old entry from DB using the procedure similar to the link below:
https://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=622732697#note47
Further Problem Description:
None
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux38480 | Title: | NCCM Config Restore Failure |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
NCCM Config Restore get failed.
Conditions:
Restoring archive get failed for device type:ASR 903 15.3(3)S3.
Errors show it having issues with handling the MOTD banner characters.
Workaround:
Restoring archive got succeed after editing archive file manually(Removed problematic MOTD banner).Find MOTD banner in attachment.
Further Problem Description:
None
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.1(0.1)PP0, 4.1(0.1)PP2 |
|
Known Fixed Releases: * | 4.2(0.1)PP6, 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv80763 | Title: | QVPC syslogs description not clear and missing information |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
QVPC syslogs description not clear and missing information, include location that is to the ME.
Category and Nature are unknown.
The descriptions that are not clear are in card out operations and are:
Messaging error
General warning
New alarm
Syslogd err
clear alarm
Conditions:
1. Model QVPC device with standby card
2. Card out the standby Port Service Function card (Shutdown VM)
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-FEB-2016 |
|
Known Affected Releases: | 4.2(2)DP0.0.653 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy19866 | Title: | FQDN should be changed in all nodes of persistency.xml |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
FQDN should be changed in all nodes of persistency.xml
Conditions:
FQDN + HA
Workaround:
Manual change:
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/main/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/ep/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/infobright/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/ep_rep/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/main_rep/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/admin/Host database-server-hostname
./runRegTool.sh -gs 127.0.0.1 set 0.0.0.0 persistency/nodes/xmp/Host database-server-hostname
Further Problem Description:
None
|
|
Last Modified: | 24-FEB-2016 |
|
Known Affected Releases: | 4.2(2.0)PP4 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun39020 | Title: | Missing remote mount folder fails cluster 2nd node installation |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * |
Symptom:
If the mount folder directory does not exists on the standby node, it will fail the installation.
Conditions:
If the mount folder directory does not exists on the standby node, it will fail the installation.
Workaround:
For instance, if the mount folder for oracle is: /opt/ora, later on it will try to create /opt/ora/oracle (if the oracle user name is oracle), it the parent path (/opt/ora) does not exists on the 2nd node, it should try to create the folder.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 24-FEB-2016 |
|
Known Affected Releases: | 4.2, 4.2(0.999), 4.2(1), 4.2(2) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy41907 | Title: | NCS:OSPF interface name missing from logical inventory |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
OSPF Interface Name is empty for certain interfaces on the OSPF logical interface.
Conditions:
When we have tunnel-te interfaces.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 24-FEB-2016 |
|
Known Affected Releases: | 4.2(2)DP1601.0.752 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy43960 | Title: | NexusC77xx VNE fails populate OSPF Interfaces dueto NullPointerException |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
The NexusC77xx VNE fails to populate OSPF Interfaces due to multiple NullPointerException's in the CiscoNexusOspfParser.
Conditions:
OSPF configuration on NexusC7706, version 7.2.1, device
Workaround:
There is no workaround for this issue
Further Problem Description:
|
|
Last Modified: | 24-FEB-2016 |
|
Known Affected Releases: | 4.2(0X)DP1601.0.782 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy43939 | Title: | N77xx VNE fails to parse PS status related syslogs, does not expedite |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
The NexusC77xx VNE fails to parse supported power supply status change related syslog messages and do not expedite 'card status' command.
Conditions:
Power supply status change on Nexus77xx devices
Workaround:
Not known
Further Problem Description:
|
|
Last Modified: | 24-FEB-2016 |
|
Known Affected Releases: | 4.2(0X)DP1601.0.782 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut99939 | Title: | CCM GUI page doesnt respond when >20 concurent users login concurrently |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
The user is not able to navigate in CCM GUI page after login.
Conditions:
When multiple users try to login to CCM application at the same time.
This issue has been observed when 20 or more than 20 users tried to access this concurrently.
Workaround:
10 concurrent session is best way to login.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(1), 4.2(1.592), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy38751 | Title: | NCS:Redundancy state of RP's not shown in the VNE |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Redundancy state is updated for RP's.
Conditions:
When NCS has HA setup.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2)DP1601.0.752, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy32792 | Title: | KeepAlive link protocol erroneously removes physical link from topology |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
In PN4.2.2 the physical links get periodically removed from topology and then rediscovered back.
Conditions:
Not specific
Workaround:
There is no workaround for this issue.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2.0)PP4, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy22568 | Title: | CDPTest fails to match link endpoint between Nexus-5K VNEs |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
PN fails to discover Ethernet and physical links using CDP Test when link endpoint is located on Nexus-5K device. If link discovery can be accomplished only with CDP Test, the links will not be discovered.
Conditions:
At least one endpoint of the physical link originates on Nexus-5K device and CDP enabled.
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2.0)PP4, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun83339 | Title: | Delete fails when a new implementation is added to an existing command |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
When a new implementation is added to an existing command, the delete operation fails.
Conditions:
The delete operation of such commands , results in a partial delete, leaving the command in a corrupted state
Workaround:
Avoid attempting to delete a command, for which a new implementation has been added through edit operation, until PP is available.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0.322), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw53378 | Title: | Verify md5 sometimes fail by beanshell command |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
The below Beanshell command sometimes fail to execute.
telnetInterface.config("#","verify /md5 ",true);
The error log is as follows.
Unexpected error occurred during script execution:
receiveUntil(): receive timeout expired(value=20000)
There's no timeout actually. Only "verify /md5" command faces this problem, and other commands are OK
Conditions:
when execute "telnetInterface.config("#","verify /md5 ",true);"
Workaround:
Use PrimeMacro instead of Beanshell
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun55948 | Title: | PN - NCCM fails for config operations via SCP MWR2941 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Config operation are failing for MWR2941 device with SCP protocol
Conditions:
In all setup.
Workaround:
Use TFTP.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 3.11(0)PP3, 4.0(0.1)PP2, 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy38123 | Title: | Image distributn Wrongly notifies the user that Device family is ASR903 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
ASR 920 image distribution.
Conditions:
1. Wrongly warns the user that Device family is ASR903 for a ASR920 device.
2. When you chose the "IOS by Images", choseASR920 drop down, then in available devices, other devices are not filtered out.
3. Distribute image by "IOS by devices" shows ASR 920 under ASR 903 Family.
Workaround:
Proceed with distribution ignoring the warning
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(0.1)PP6, 4.2(2.0)PP3, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv07083 | Title: | After distreburing image using SCP - connection is not valid |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
When doing distribute and activate using SCP, sometime the connection from the VNE becomes invalid and failed to execute the dir command and the activation failed.
Conditions:
doing distribute and activate using SCP.
Workaround:
none.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0(1.999), 4.2(2.0)PP3, 4.2(3), 4.2(3.821) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy14652 | Title: | Nexus VNE missing registration to update LAG status on-demand |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
When Ethernet aggregation link configured between Nexus devices is shut down for any reason, the Prime Network creates duplicate LAG link down tickets - one for each link endpoint.
Conditions:
Ethernet aggregation link configured between Nexus devices.
Workaround:
There is no workaround for this issue.
Further Problem Description:
Root cause. Nexus VNE scheme is missing registration 'ce-ethernet-link-status-snmp' on Layer2Aggregation DC, which updates LAG interface status on-demand. The link negotiation process relies on this registration and, when missing, creates duplicate LAG link down tickets for each endpoint.
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2)DP1601.0.791, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv06547 | Title: | Nexus7K do not show OSPF v2 neighborswhen OSPF v2 and v3 has the same id |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Nexus7K do not show OSPF v2 neighbors when OSPF v2 and v3 has the same process id
Conditions:
1. Model Nexus7K that has OSPF v2 and v3 with the same process id
2. Open Nexus7K inventory
2. Go to OSPF v3 and see if it has neighbors
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuq71407 | Title: | TP snapshot is not being updated |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
TP snapshot is not getting updated properly.
Conditions:
When VNE or AVM is stopped, relevant elements in the snapshot gets deleted. It is geeting getting deleted only after 2-3 minutes.
If the AVM/VNE is stopped and started immediately then the snapshot is not updated.
Elements are deleted from the snapshot only after 2-3 minutes and never added once again.
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0)PP999, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCup91729 | Title: | Ethernet LAG: Changing the MAC address changes the BW to 0 bps. |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Ethernet LAG: Changing the MAC address, changes the BW to 0 bps.
Steps to reproduce:
1.Model the device.
2.Change the MAC address of the port channel.
3.Observe the changes in the Ethernet Link aggregation IMO.
Conditions:
Change the MAC address of the port channel and check the BW.
Workaround:
When clicking on other DC and clicking back LAG DC only the BW value changing in GUI.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 3.10(11)XDP1407.0.412, 4.0, 4.1, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux91431 | Title: | SONET/POS properties are missing |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
SONET/POS properties are missing
Conditions:
Cisco ASR903 + SONET/POS/Controller specific port configuration
Workaround:
We can see the properties in the Mediator Debugger or by pressing F2 on the interface
Further Problem Description:
None
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1(0X)DP1601.0.772, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun33376 | Title: | service alarms dont work as expected on delete of service instance |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Service alarms are not generated when deleting a VSI from the device.
Conditions:
EVC with VSIs
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0.311), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy50395 | Title: | P-PN: CCM Activation nexus 7k failed |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
while activating Nexus 7k it failed and the error doesn't clear.
it remove boot configuration but it doesn't return the old boot configuration if someone will reload the device it will stuck in Loader state.
Conditions:
trying upgrade or downgrade nexus7k it failed
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.0)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCur66647 | Title: | PN - Command Builder script for ME1200 results in protocol failure |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
PN - Command Builder script for ME1200 results in protocol failure
Conditions:
When attempting to create and run a new CB script against the ME1200 device, the results always displays the following message: "Error! Connection/Protocol failure".
Workaround:
NA
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0)PP3, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux06552 | Title: | FEC-129 Type1 peer isn't displaying in inventory & topo links r missing |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Type1 peer isn't displaying in inventory & topo links r missing
Conditions:
none
Workaround:
none
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3)DP0.0.742 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux62671 | Title: | Sheer.conf is not updating during upgrade from 422->423 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Sheer.conf is not updating during upgrade from 422->423.
Conditions:
There is difference between the sheer.conf file in freshly and upgraded setup.
In upgraded setup exports are not excluded.
Workaround:
Fresh setup:
# use SSL with default configuration
SSLEngine ON
SSLCipherSuite ALL:-ADH:!EXPORT56:!EXP:!aNULL:!eNULL:!RC4+RSA:!RC4:+HIGH:!MEDIUM:!LOW:!SSLv2
SSLCertificateKeyFile conf/sheer.cert.key
SSLCertificateFile conf/sheer.cert.cert
SSLProtocol all -SSLv2 -SSLv3
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.672) |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuo99877 | Title: | VM Setup: With different NIC names of nodes, PN installation fails. |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
With different names given to NICs of participating nodes, PN installation fails.
Conditions:
With different names given to NICs of participating nodes, PN installation fails.
Workaround:
As long as the other ip is pingable, different names shouldn't fail PN installation.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.1, 4.2, 4.2(0.381), 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux05216 | Title: | no flapping event on asr 5500 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
no flapping event on asr5500
Conditions:
flapping event
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2)DP1509.0.702 |
|
Known Fixed Releases: * | 4.1, 4.2(1), 4.2(2), 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw96681 | Title: | View Compliance audit result takes long time |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
When we click on the result in compliance audit, to see all the violation report. It takes a long time to show up that page
Conditions:
THere has to be large amount of devices
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(2.0)PP2, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy28373 | Title: | PN - major upgrade script error while updating perms |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
* error seen while running upgrade from PN 4.1:
Can't call method "perm" on an undefined value at ./upgrade.pl line 3242.
* upgrade exists with this error
Conditions:
* Upgrade from older major release to latest release: PN 4.2.2
* single gateway, no units
Workaround:
modify the script as described and rerun.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.1, 4.2, 4.2(1), 4.2(2.999), 4.2(3.832) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux53678 | Title: | Transfering InfoBright backup data during switchover might fail |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
- Transferring InfoBright backup data to 10.16.88.35 Can't exec "rsync": Argument list too long at /var/adm/cisco/prime-network/scripts/ha/util/perl/lib/perl5/site_perl/5.16.0/Net/OpenSSH.pm line 1433.
[FAILED]
Conditions:
many files in IB backup dir
Workaround:
remove old files or ignore
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.0(0.1)PP2, 4.1, 4.2, 4.2(1), 4.2(2), 4.2(2.0)PP3, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuo43702 | Title: | OAM Admin status change is not getting reflected in Physical Inventory |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
OAM Admin status in Physical inventory is wrong
Conditions:
OAM status
Workaround:
None
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.1(0)PP999, 4.2, 4.2(0.452), 4.2(1), 4.2(2) |
|
Known Fixed Releases: * | 4.1(0)PP3, 4.2(2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun47761 | Title: | EFP missing from on the pseudowire and EVC service view |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Missing EFP in EVC view.
This issue does not happen consistently.
Conditions:
Deletion of EFP from Pseudowires and re-adding may be the cause.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0.321), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw39299 | Title: | Create Command Manager Script in IE 11 throws an error |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Creation of Command Manager script is timed out.
Conditions:
The issue is seen when script is created using Internet Explorer 11.
Workaround:
Create command manager script using Google chrome/Firefox
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2.0)PP2 |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuq18115 | Title: | Operations Report installation fails with Local HA config |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Operations Report installation fails.
Conditions:
Conditions:
* Upgrade from 3.10
* Local HA setup
* Disk partition labels of the format /name
Workaround:
1) Cluster should be running.
2) Fix /etc/cluster/cluster.conf by replacing string umount with unmount; then increase file version number.
3) Run ccs_tool update.
4) In the registry folder for PN; vi avm99.xml, find avm45, if found skip to step(6), if not found continue: find avm44, copy the 7 lines that define entry for avm44, duplicate it, and change the entry replacing 44 with 45 (two places). and set enable to false for the new entry which is for avm45.
5) Restart PN; check status, see that avm45 is disabled.
6) Replace the install script with the version attached to CDETS.
7) Take the install script /tmp/primenw_integration.pl (in your lab gw1 machine) and replace the script in the folder created on step( 5).
8) Run the installer script.
9) When message ?Waiting for cluster started? appears run the following on the second gateway:
rm -rf /usr/local/infobright-4.0.7-x86_64/data ; ln -s /ibdata/ifb_datadir /usr/local/infobright-4.0.7-x86_64/data
10) Continue install as normal.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.1, 4.1(0.342), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu41883 | Title: | PN - VNE does not pick up the latest DP on restart |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
VNEs are not pickup up and running with the latest DP following creation or restart.
Conditions:
Prime Network installation with DP0, DP1501 and DP1503
Workaround:
Specifically configure VNE to use DP1503 instead of "latest"
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.1(0.1)PP1, 4.1(0.1)PP2, 4.2(0.1)PP4, 4.2(2.0)PP3 |
|
Known Fixed Releases: * | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy25577 | Title: | Collector fails on CB command when Telnet prompt is present in the echo |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
NIOTelnetCollector fails retrieve true command results and cuts Telnet response from the first telnet prompt to the end of results.
Conditions:
Telnet response contains device prompt string in the command echo.
Workaround:
On ASR9K device apply the following commands, which expected to remove prompt in command echo:
vty-pool default 0 99
process restart devc-vty
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(1), 4.2(1.0)PP1, 4.2(2), 4.2(2.0)PP4, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuo86912 | Title: | EFD not split after link down. |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
EFD not split after link down and they stayed in one efd and no service alarm for efd split has been generated.
Conditions:
Steps to reproduce: :
We have the link: AGG1-6524ME-NY-rec#GigabitEthernet1/28 ----- GG-6500-NY-rec# GigabitEthernet3/9
in up state
And A & Z sides of the above link are in same efds
Then we're shutting down the link
Then we expected to see that A & Z sides of the above link are in different efds,
but they stayed in one efd and of course no service alarm for efd split has been generated.
in addition we have empty container in Ethernet Flow Domain
Workaround:
N/A
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0.322), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux18374 | Title: | Import from devices does not load groups in IE 11 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Import from devices does not load groups in Internet Explorer
Conditions:
The issue is seen only in internet Explorer
Workaround:
Google Chrome/Firefox can be used.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2.0)PP2, 4.2(2.0)PP3 |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux56920 | Title: | Error messages seen while upgrading PN422-->PN423 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Error messages seen while upgrading PN422-->PN423
Conditions:
+ Preparing for Prime Network Upgrade
Use of uninitialized value $policycnt in concatenation (.) or string at upgrade.pl line 3431.
Use of uninitialized value $n in chomp at upgrade.pl line 2538, line 9.
Use of uninitialized value $n in substitution (s///) at upgrade.pl line 2540, line 9.
Use of uninitialized value $n in substitution (s///) at upgrade.pl line 2540, line 9.
Workaround:
Error messges should not be come during upgrade.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.672) |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut05315 | Title: | P-PN: Login to Operations report that integrated to suite has failed. |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
When Prime network is integrated to suite and I try to login to operation reports, It fails
Conditions:
Install Prime network as none-default installation( in remote server) and integrated Prime network to Suite.
After installation of operations reports is done, tried to open the application using username/password of prime network installation and it failed.
Workaround:
No workaround for suite environment.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.1, 4.1(0)PP4, 4.2, 4.2(0.1)PP1, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw01933 | Title: | Command Manager : Child process is not created by Operator User in CCM |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Description:
1) Login to CCM as Operator
2) Create a Command , and schedule it to run it .
3) No child process is created , which should not be the scenerio
Conditions:
No special condition
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2), 4.2(2.662), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux09483 | Title: | NCCM: Image Files are not fetched from external Server to distribute |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
External repository from the Change and Configuration management(CCM) (Images->Repository->Import External Repository) showing as No data available
Conditions:
When external server is used with different date format.
Workaround:
Check whether "ls -l" on the external server returning as below format.
pn@tier4-rhel-vm10 [~/XMP_Platform]% ls -l
drwxr-x--- 9 user group size MMM DD HH:MM
Example:
% ls -l
drwxr-x--- 9 test grp 10 Oct 21 10:16 test.txt
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(0.1)PP6, 4.2(2.0)PP4, 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun29698 | Title: | PN- auto_install_RH.ini contains passwords in cleartext |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | <B>Symptom:</B>
Prime Network - auto_install_RH.ini file contains passwords in cleartext
<B>Conditions:</B>
Prime Network installed in HA / DR configuration
<B>Workaround:</B>
After installation, delete the passwords from the ini file
Further Problem Description:
PSIRT Evaluation:
The Cisco PSIRT has evaluated this issue and does not meet the criteria for PSIRT ownership or involvement. This issue will be addressed via
normal resolution channels.
If you believe that there is new information that would cause a change in the severity of this issue, please contact psirt@cisco.com for another
evaluation.
Additional information on Cisco's security vulnerability policy can be found at the following URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.0(0.1), 4.1, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw48321 | Title: | Command Manager with configurator user : Not Able to create a group Job |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Command Manager is not allowing to create a group Job for configurator user
Conditions:
Configurator User is not able to create command Manager Group Job.
Workaround:
Select the devices in the group manually and Scheudle the Command Manager Job.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2.0)PP2 |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun59446 | Title: | STP block decoration is not shown when more than one link |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
The block decoration (lock) is missing.
Conditions:
More than one link where there is a blocked port by STP.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.0(0)PP999, 4.1, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy41457 | Title: | NCCM failed to activate part of ASR901 images |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | NCCM failed to activate part of ASR901 images
Symptom:
NCCM failed to activate part of ASR901 images.
This happen for part of devices where have the following question after "wr mem"
Conditions:
1. Model ASR901 that has the "Warning: Attempting to overwrite an NVRAM configuration previously written" Question after wr mem
2. Activate new image
Workaround:
Save the configuration ("wr mem") manually in the device before run NCCM activation
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(0.1)PP5, 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux26633 | Title: | CPT: CCM Back up operation showing failure |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
While taking backup,it is showing failure
Conditions:
Going to configuration and taking backup on CCM page
Workaround:
N/A
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.1(0X)DP1511.0.741, 4.2(0X)DP1511.0.741, 4.2(1)DP1511.0.741, 4.2(2)DP1511.0.741, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy08852 | Title: | Distribution using distribution servers fails more than 5 devices. |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Image Distribution for ASR1k device fails for more than 5 devices.
Conditions:
The operation fails for more than 5 devices
Workaround:
if the number of devices is more than 5, scheudle more than 1 job.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(2.0)PP1 |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuq93887 | Title: | EFP Operational State is not updating while Bridge Shutdown. |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
EFP Operational State is not updating when Bridge Shutdown in PN for PBB-VPLS.
Conditions:
This problem is reported in PBB-VPLS Service.When we do Admin Shut to the I-Bridge from ASR9K-CN-ABR1, End-to-End Service went DOWN. CLI immediately reflected the status of I-Bridge went from Up to Admin Down. Using the regular Poll-Now Option in PN,went in PN's Edge-Bridge Container and checked the status of I-Bridge in PN after making the I-Bridge DOWN. But PN was showing the Admin as well as Operation State of I-Bridge as UP.Waited for 18 mins but then also the state of I-Bridge in PN was UP and no Alarms reflected in PN. Did Poll-Now manually for several times even then no change observed in PN's I-Bridge State. Restarted the VNE ASR9K-CN-ABR1, even then PN was showing the State of I-Bridge as UP.
Workaround:
N/A
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.2(0X)DP0.0.452, 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun70782 | Title: | PN-HA emdbctl switches remote DB to READ ONLY |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Restoring the DB to a previous version on a DR setup, puts the remote DB in READ ONLY mode.
this stops the replication to the remote site.
Conditions:
Restoring the DB to a previously backed up version on GEO HA setup.
Workaround:
On the Remote DB machine, stop the replication:
cd /var/adm/cisco/prime-network/scripts/ha/util/
perl primeha -stop
On the Primary node restore the database (emdbctl --restore).
On the Primary Node as user root extract the contents of the RH_ha.zip from the RH_ha/ directory run setup_Prime_DR.pl to setup the replication again.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.0(0.1)PP2, 4.1, 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux27394 | Title: | ASR55xx: Wrong CLI commands used to get description and MAC |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Error seen in the platform log for the mentioned commands.
Conditions:
discovery and polling
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.1(0X)DP1601.0.762, 4.2(0X)DP1601.0.762, 4.2(1)DP1601.0.762, 4.2(2)DP1601.0.762, 4.2(3)DP0.0.762, 4.3(0X)DP0.0.762 |
|
Known Fixed Releases: * | 4.1, 4.2(2), 4.2(3), 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw97429 | Title: | ISIS neighbor IRD for ipv4 and ipv6 is created with the same DC key |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
ISIS neighbor IRD for ipv4 and ipv6 is created with the same DC key
Conditions:
two IRD created (IPv4 and IPv6)with same DC key. So ipv6 is overriding the ipv4 enter as its same key.
Workaround:
N/A
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(1)DP1507.0.663, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy28484 | Title: | PN - local HA Install has wrong TNS host names |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Install completes, but because Oracle does not start successful, install is reported as failed
Conditions:
* local HA install
* fqdn hostname ALP2SCPNDBGW01-nbi.wnsnet.attws.com
* hosts line has multiple alias names for the host like so:
107.76.237.243 ALP2SCPNDBGW01 ALP2SCPNDBGW01-nbi.wnsnet.attws.com
* PN is given ALP2SCPNDBGW01 as the hostname
Workaround:
* mount oracle home directory
* as oracle user edit : ~/product/12.1.0/db_1/network/admin/tnsnames.ora ~/product/12.1.0/db_1/network/admin/listener.ora
---> change the invalid hostname to the virtual ip address assigned to oracle.
* start oracle cluster service
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.0, 4.1, 4.2, 4.2(1), 4.2(2.999), 4.2(3.832) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun18551 | Title: | Rediscovered EFP edge display with reconcile icon on the service |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
When a VSI is removed and then rediscovered, it is represented by a reconciliation icon rather than as a new object.
Conditions:
On a map with Transparent EVP-Tree, remove a VSI on the device.
The object will appear with a reconciliation icon.
Reconfigure the very same VSI on the device.
It will be discovered again with reconciliation icon and not as a new object.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: * | 4.1, 4.1(0.311), 4.2, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy51323 | Title: | P-PN:VSM card display wrong status while the card in shutdown |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
VSM card after shutdown it display in physical inventory as status Ok instead of Major state like another crads behave in like this scenario
Conditions:
model VSM card in ASR9k and shutdown the card via the admin mode as configuration
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3)DP0.0.832 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuq76302 | Title: | Scroll up or down is not appearing for configuration scripts |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
Scroll up or down is not appearing for configuration scripts to access all the scripts
Steps to reproduc
Conditions:
ASR5k inventory
Workaround:
none
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3)DP0.0.811 |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux26293 | Title: | Coming as information for VPC-5-VPC-DOWN syslog |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
VPC-5-VPC_Down syslog Coming as information event and it is attached to VPC domain id, instead of LAG.
Conditions:
Model nexus 5k,6k,7k devices in prime network and generate VPC-5-VPC-DOWN syslog
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.1(0X)DP1511.0.741, 4.2(0X)DP1511.0.741, 4.2(1)DP1511.0.741, 4.2(2)DP1511.0.741 |
|
Known Fixed Releases: | 4.1, 4.2(1), 4.2(2), 4.2(3) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux80765 | Title: | rsync_monitor_db.cmd on primary GEO ha node interfer with upgrade |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
upgrade on GEO HA fails
Conditions:
the following cron job is running on the primary node:
0,10,20,30,40,50 * * * * if [ -f /export/home/pnetwork/.local_ana ]; then /var/adm/cisco/prime-network/scripts/ha/rsync/rsync_monitor_db.cmd > /dev/null 2>&1; fi
Workaround:
before upgrade, upgrade the following line in cron list on primary:
0,10,20,30,40,50 * * * * if [ -f /export/home/pnetwork/.local_ana ]; then /var/adm/cisco/prime-network/scripts/ha/rsync/rsync_monitor_db.cmd > /dev/null 2>&1; fi
Further Problem Description:
|
|
Last Modified: | 01-MAR-2016 |
|
Known Affected Releases: * | 4.0, 4.0(0.1)PP2, 4.1, 4.2, 4.2(0.1)PP0, 4.2(1), 4.2(2), 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux09819 | Title: | wrong mapping of fantray name to card dc for BRINGDOWN syslsog parsing |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
BRINGDOWN syslog not correlated to fan out ticket
Conditions:
BRINGDOWN syslog is created due to fantray OIR
Workaround:
N.A.
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.0, 4.1, 4.1(0X)DP1601.0.781, 4.2, 4.2(0X)DP1507.0.671, 4.2(1), 4.2(1)DP1601.0.781, 4.2(2), 4.2(2)DP1601.0.781, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy49373 | Title: | Nexus VNE missing core registration update IP interface status on demand |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: * | Symptom:
When modeling line card OIR on Nexus VNE, the 'Interface status down' service alarms often are not cleared holding correlated 'Card in' ticket not cleared indefinitely.
Conditions:
Line card OIR on Nexus switch.
Workaround:
There is no workaround for this issue.
Further Problem Description:
|
|
Last Modified: | 01-MAR-2016 |
|
Known Affected Releases: | 4.2(0X)DP1601.0.791 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy49271 | Title: | PN - Mobility - CGW Service Container shows LCOM.sheer.imo listing |
|
Status: | Open |
|
Severity: * | 3 Moderate |
Description: * | Symptom:
CGW Service Container shows Lcom.sheer.imo.technologies.ICGWService stack trace under CGW Service column.
Conditions:
CGW Services created
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 01-MAR-2016 |
|
Known Affected Releases: | 4.2(3.0)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux26844 | Title: | NullPointerException in logs for ASR5K-18.4 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
logs error:NullPointerException in logs for ASR5K-18.4
Conditions:
Asr5k logs
Workaround:
none
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.741), 4.2(3.752) |
|
Known Fixed Releases: | 4.2(2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy18051 | Title: | Upgrade from PN422 to PN423 (Build 229) gives an error |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * |
Symptom:
Upgrade from Prime network 4.2.2 to Prime network 4.2.3 fails
Conditions:
None
Workaround:
None
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 01-MAR-2016 |
|
Known Affected Releases: | 4.2(3.811) |
|
Known Fixed Releases: * | 4.2(3) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux56999 | Title: | MME service: EMM/ESM code support |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: |
Symptom:
EMM/ESM code support attribute support in PN vision for MME service
Conditions:
ASR5k device inventory
Workaround:
none
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.772) |
|
Known Fixed Releases: | 4.2(3) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy51443 | Title: | P-PN:shutdown interface that connected to mng VSM no get any notificatio |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
while shutdown the interface in ASR%9k that connect to MAnagement inteface of VSM card but in VSM side we don't see any change( look like no action does)
Conditions:
shutdown the interface that connected to management interface of VSM card
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3)DP0.0.832 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux31410 | Title: | Strip-leading-digit user-name attribute is missing in AAA Group service |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * |
Symptom:
"Strip-leading-digit user-name" is not showing in AAA Group service under inventory.
Conditions:
Asr5k inventory
Workaround:
none
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 01-MAR-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(3) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux27979 | Title: | Different number of pseudowires in different PN versions |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: |
Symptom:
PN41, PN42, and PN422 show different number of pseufowires in logical inventory.
Conditions:
Configuration of various types of pseudowires on ASR9K devices
Workaround:
There is no workaround for this issue.
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.0, 4.0(0X)DP1310.0.741, 4.1, 4.2, 4.2(0X)DP1511.0.741, 4.2(1), 4.2(1)DP1511.0.741, 4.2(2), 4.2(2)DP1511.0.741, 4.2(3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy51295 | Title: | P-PN:VSM Card interfaces disappear and notification no receive |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
After performing shutdown to VSM card interface under sub slot disappear and also after the card come up the interfaces don't update in physical inventory.
Conditions:
Model VSM card and perform shut it's card
Workaround:
need to perform "poll now" in device level in order to see the interfaces update under the card also other alarms
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3)DP0.0.832 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy11201 | Title: | VCB is not opening |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
VCB application is not opening
Conditions:
VCB application
Workaround:
1. Stop ANA/PN
2. Go to /export/home/410/XMP_Platform/server/webapps
3. Delete the folder "prime-network-web"
4. Do ANA restart
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(3.811) |
|
Known Fixed Releases: * | 4.2(2) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy14371 | Title: | N7K VNE: Debug log from CiscoNexus70xxVPCDomainParser appear as errors |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
Debug statements from CiscoNexus70xxVPCDomainParser appear as errors.
Conditions:
Modeling of Nexus70XX device with configuration of VPC.
Workaround:
There is no workaround for this issue.
Further Problem Description:
|
|
Last Modified: | 05-FEB-2016 |
|
Known Affected Releases: | 4.1(0X)DP1511.0.742, 4.2(2)DP1601.0.791 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus73603 | Title: | NV GUI does not update LAG bandwidth until manually refreshed |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
When LAG interface bandwidth changes, the NV GUI does not reflect the change although underlying model gets changed. The change becomes visible in GUI only with manual reload of the LAG inventory or/and property windows.
Conditions:
NV showing LAG inventory and LAG bandwidth changes on device (no switching to other inventory windows).
Workaround:
Manual reload of inventory window
Further Problem Description:
|
|
Last Modified: | 08-FEB-2016 |
|
Known Affected Releases: * | 3.10(0.1)PP5, 4.1(0)PP4, 4.2(2.632) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCue38333 | Title: | PN - General Error (1000) on manual Switch to Standby |
|
Status: | Terminated |
|
Severity: | 4 Minor |
Description: * | Symptom:
Improved Error message handling needed if a user attempts to perform a Manual Switchover of an Active Unit to a Standby Unit and there is no available Standby Unit in the same protection Group. In this case a General Error (1000) message box is presented. The application should present a user friendly message indicating: "There is no redundant machine for this protection group."
Conditions:
Manual switchover of an Active unit when no standby unit exist
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 18-FEB-2016 |
|
Known Affected Releases: | 3.9(0.1)PP0 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux40985 | Title: | PN - Pentaho tomcat does not fully die when stopped |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: * | Symptom:
process for tomcat remain, the process benign, but consumes resources
Conditions:
stop pentaho with script: ~/pentaho/ctlscript.sh stop
Workaround:
kill the pentaho process manually after stopping pentaho...
steps:
* ps -fe| grep pentaho
* take pids from the list returned and kill them with command: kill
Further Problem Description:
|
|
Last Modified: | 19-FEB-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux50778 | Title: | NullPointerException in LSE.getConnectionIPsForMplsTETunnel |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
The flood of NullPointerException in LSE.getConnectionIPsForMplsTETunnel errors when tunnel interface was removed from configuration.
Conditions:
MPLS L3VPN configuration.
Workaround:
There is no workaround for this issue.
Further Problem Description:
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.1(0.1)PP2 |
|
Known Fixed Releases: * | 4.2(0.1)PP6, 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux76387 | Title: | Add retries to the NIOTelnetLoginCommand |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Add retries to the NIOTelnetLoginCommand
Conditions:
When disconnecting fails from device
Workaround:
None
Further Problem Description:
ERROR [12 28 2015 11:05:26.495 EAT] - Lotem - End-Of-Stream detected, the selection key for (MC.CA-1858 [2][192.168.130.47])-0:0:0:0:0:0:0:0 [64] will be cancled
ERROR [12 28 2015 11:05:26.495 EAT] - NIOTelnetCollector.connectionLost - 192.168.130.47 connection lost to device, reason=END_OF_STREAM
DEBUG [12 28 2015 11:05:26.495 EAT] - Nio.Info - NIOTelnetCollector.connectionLost - 192.168.130.47, error msg to send: error=Context unreachable(4), description=Protocol timeout(null)
|
|
Last Modified: | 22-FEB-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(2.0)PP4 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy21112 | Title: | Fex port Status noti intermediate syslogs are generating new tickets |
|
Status: | Open |
|
Severity: * | 6 Enhancement |
Description: | Symptom:
Noti connecting and Noti Fabric up syslogs are generating a new ticket
Conditions:
none
Workaround:
clear and remove sdditional ticket
Further Problem Description:
|
|
Last Modified: | 20-FEB-2016 |
|
Known Affected Releases: | 4.1(0X)DP1601.0.791 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy51173 | Title: | Update S/W Version of Nexus 9k in PrimeNetwork-42-SupportedVNE'sAddendum |
|
Status: | Open |
|
Severity: | 6 Enhancement |
Description: | Symptom:
In PrimeNetwork-42-SupportedVNEsAddendum and PrimeNetwork-422-SupportedVNEsAddendum files of Jan DP , under Cisco Nexus 9000Supported Software Versions add the software version "Nx-OS 7.0(3)I2(2)" which is added support from "DP 1601"
Conditions:
New software Version "Nx-OS 7.0(3)I2(2)" to be added in "DP 1601"
Workaround:
N/A
Further Problem Description:
|
|
Last Modified: | 29-FEB-2016 |
|
Known Affected Releases: | 4.2(0X)DP1601.0.791 |
|
Known Fixed Releases: | |
|
|
| |
没有评论:
发表评论