| |
|
Alert Type: | New |
Bug Id: | CSCux07462 | Title: | Compound Task Inputs are all becoming mandatory |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
All the compound task optional inputs are becoming mandatory in WF
Conditions:
Create the Compound task with some optional & mandatory inputs & All the Compound task optional inputs are becoming mandatory when use this compound Task in another workflow(Parent WF)
Workaround:
No
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | 5.4(0.1), 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz21598 | Title: | Workflow Schedules - Scheduled WF doesn't run exactly per the schedule |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Scheduled Workflow's doesn't run exactly per the schedule
Conditions:
Scheduled WF is running 1-2 seconds late than the previous run instance when we scheduled WF to run continously for long time,days & weeks
Workaround:
Scheduled the WF with recurrence type "only once" instead of scheduling a workflow to run continuously(No End, Fixed Number of Times) for a long time, days/weeks.
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.2) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz34429 | Title: | Mapping Tenant with Tenant Profile task missing in 5.5 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
After upgrade from 5.4.0.3 to to 5.5, the workflow with task "Mapping Tenant to Tenant Profile" will show validation error for service offering, as the service offering input is added in 5.5 which was not there in 5.4.0.3
Conditions:
Create workflow with the "Mapping Tenant to Tenant Profile" task in 5.4.0.3 appliance, upgrade the appliance to 5.5 and validate the workflow.
Workaround:
After upgrade to 5.5, add the service offering input in the workflow, do the input mapping and validate the task.
Further Problem Description:
|
|
Last Modified: | 07-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz81479 | Title: | CPU/Memory HeatMap report for VMware are not populating intermittently |
|
Status: | Terminated |
|
Severity: | 3 Moderate |
Description: * | Symptom:
CPU and Memory Heat maps data is empty with n/a vaue
Conditions:
None
Workaround:
None
Further Problem Description:
Check if performance data collector task is executing properly
Check if the trend graphs are working as expected.
Check if there is time sync between UCSD and the vCenter
|
|
Last Modified: | 07-JUN-2016 |
|
Known Affected Releases: | 5.4(0.3) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz34348 | Title: | Identify Resource tasks show validation error after upgrd frm 5403 to 55 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Identify Resource tasks (Virtual Compute/Virtual Storage/Virtual Network/Physical Compute/Physical Storage/Physical Network) show validation error after upgrade from 5.4.0.3 to 5.5
Conditions:
The workflows with the tasks are created in 5.4.0.3 appliance and then upgrade the appliance to 5.5.0.0.
Validate the workflows.
Workaround:
Validation fails as the input identity type was changed from "Generic-text-input" to "Resource Group Service Offering" for the "Service Offering" input in all the 6 tasks in 5.5.0.0
Re-map the input for Service Offering after creating an input of type "Resource Group Service Offering"
Further Problem Description:
|
|
Last Modified: | 07-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz44142 | Title: | Evaluation of cloupia-cuic for NTP_April_2016 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Cisco UCS Director includes a version of ntpd that is affected by the vulnerabilities identified by the Common Vulnerability and Exposures (CVE) IDs:
CVE-2016-1551, CVE-2016-2516, CVE-2016-2517, CVE-2016-2518, CVE-2016-2519, CVE-2015-8138, CVE-2016-1550, CVE-2015-7704, CVE-2016-1547, CVE-2016-1548, CVE-2016-1549
And disclosed in http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20160428-ntpd
This product is affected by one or more of the listed CVE ids.
Conditions:
Device configured with NTP.
Cisco has reviewed and concluded that this product is affected by the following Common Vulnerability and Exposures (CVE) IDs:
* CVE-2016-2518 - Network Time Protocol Crafted addpeer With hmode > 7 Causes Array Wraparound With MATCH_ASSOC
* CVE-2015-8138 - Network Time Protocol Zero Origin Timestamp Bypass
* CVE-2016-1550 - Network Time Protocol Improve NTP Security Against Buffer Comparison Timing Attacks
* CVE-2015-7704 - Network Time Protocol Original Fix For NTP Bug 2901 Broke Peer Associations
* CVE-2016-1548 - Network Time Protocol Interleave-pivot Denial Of Service Vulnerability
* CVE-2016-1549 - Network Time Protocol Sybil Vulnerability: Ephemeral Association Attack
* CVE-2016-1551: Network Time Protocol Refclock Impersonation Vulnerability
* CVE-2016-2516: Network Time Protocol Duplicate IPs On Unconfig Directives Will Cause An Assertion Botch In ntpd
* CVE-2016-2519 - Network Time Protocol Remote ctl_getitem() Return Value Not Always Checked
* CVE-2016-2517: Network Time Protocol Remote Configuration Trustedkey/Requestkey/Controlkey Values Are Not Properly Validated
This product is not affected by the following Common Vulnerability and Exposures (CVE) IDs:
* CVE-2016-1547 - Network Time Protocol CRYPTO-NAK Denial Of Service Vulnerability
Workaround:
Not available.
Further Problem Description:
Additional details about those vulnerabilities can be found at http://cve.mitre.org/cve/cve.html
PSIRT Evaluation:
The Cisco PSIRT has assigned this bug the following CVSS version 2 score. The Base and Temporal CVSS scores as of the time of evaluation are: 6.4/5.3
http://tools.cisco.com/security/center/cvssCalculator.x?version=2&vector=AV:N/AC:L/Au:N/C:N/I:P/A:P/E:F/RL:OF/RC:C/CDP:N/TD:N/CR:L/IR:L/AR:
The Cisco PSIRT has assigned this score based on information obtained from multiple sources. This includes the CVSS score assigned by the third-party vendor when available. The CVSS score assigned may not reflect the actual impact on the Cisco Product.
Additional information on Cisco's security vulnerability policy can be found at the following URL:
http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCva15077 | Title: | Volume report under XtremIO initiator group is empty |
|
Status: | Terminated |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Volume report under XtremIO initiator group is empty
Conditions:
UCSD 5.5.0.0 build 55376
Workaround:
N/A
Further Problem Description:
N/A
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz66183 | Title: | VNC viewer not working for IE for a given VM |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
VNC viewer for a VM not working for Internet EXplorer. Works fine for both firefox and chrome browsers.
Conditions:
VNC viewer for a VM not working for Internet EXplorer. Works fine for both firefox and chrome browsers.
This does not work even after all required steps are completed.
Workaround:
no workaround
Further Problem Description:
|
|
Last Modified: | 02-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux84907 | Title: | Select User during create SR takng longer time when there are bulk users |
|
Status: | Open |
|
Severity: * | 3 Moderate |
Description: | Symptom:
User selection for VM ownership is taking longer time when creating a service request.
Conditions:
If large no of users are synced in to UCSD
Workaround:
NOne
Further Problem Description:
|
|
Last Modified: | 15-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux22439 | Title: | UCSD GUI fails with Flex Error #1001: Digest mismatch with RSL |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Access to the Cisco UCS Director GUI fails with the following error, immediately after logging in:
Flex Error #1001: Digest mismatch with RSL http://10.0.0.10/app/cloudmgr/cloupia_common.swf. Redeploy the matching RSL or relink your application with the matching library.
Conditions:
This can happen after an upgrade of the UCS Director appliance. Exact conditions are not know at this time.
Workaround:
A number of different workarounds have been reported to work:
1) Clear the browser cache
2) Restart the browser (or all open browsers)
3) Use a different browser
4) Use HTTP instead of HTTPS, or vice versa
5) Perform a browser reset, as described in the following documents. Please note that this will erase any specific browser settings you may have configured.
For Firefox:
https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings
For Internet Explorer:
http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings#ie=ie-11
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 4.0, 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.2) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz65499 | Title: | ctrl+alt+del reboot looses connectivity to Linux VM on IE |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: | Symptom:
ctrl+alt+del reboot looses connectivity to Linux VM on IE.
Conditions:
Once ctrl+alt+del is clicked on the VMRC page of a linux VM then the VM reboots and this results in the error message in IE browser.
Workaround:
No workaround
Further Problem Description:
|
|
Last Modified: | 02-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz10391 | Title: | 2 IP Subnets getting reserved frm Tenant IP Subnet Pool for DR container |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Creating DR container is allocating two IP Subnet from Tenant IP Subnet Pool.
Conditions:
While creating DR container.
Workaround:
This issue has been fixed in 5.5.
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.3(2.1) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy02658 | Title: | Re-login profile action in userInfo popup doesn't login into the profile |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
"Relogin profile" action in the user information popup not working properly. Instead of re-login with profile, it's redirecting to login page.
Conditions:
User need to select any one profile in user information pop-up and click "Relogin profile" action.
Workaround:
"Relogin profile" action will redirect to login page. User need to enter login details and then submit the request.
Other than default profile, if you need to jump different profile then need to enter & password in the login page.
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.2), 5.5(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy94818 | Title: | "Fund" report is available when "Service Provider" is enabled |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
If service provider option enabled then we should not show "Fund" report in Organization - Summary Menu.
Conditions:
Fund reports coming only on MSP Mode(Service provider mode).
Workaround:
No workaround for this issue. Also, by default 'Fund' report showing 0. Hence, no issue. We are removing this report to avoid confusion.
Further Problem Description:
Under Organization - Summary menu, if we select any group then fund report should not come.
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy99629 | Title: | Correct Naming policy is not mapping to vDC in provisioning VM |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Correct Naming policy is not mapping to vDC in provisioning VM
Conditions:
1. Policies > Virtual > Service delivery > Name Validation policy >Create 2 Name Validation policy with different format
2. Policies > Virtual > Service delivery > Create 2 System policy mapping Name validation policy
3. Policies > Virtual > vDCs > Create 2 Vdc with 2 system policy created in above step and assign to default group
4. Policies > Virtual > vDCs >Create 1vDC with system policy without name validation polciy and assign to "test" group
5. Organization > Create SR > select the default group and validate the "VM name or Prefix" option
6. Change the group to "test" and validate the "VM name or Prefix " option
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.2) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva31162 | Title: | Input filter issue if 'Override Admin Input' is selected |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Workflow Input filter does not work based on the previous input selection
Conditions:
If 'Override Admin Input' is selected in the input field from which the other field get filtered.
Workaround:
Avoid using new 'Override Admin Input' feature in UCSD 5.5.0.0 if filters are used for the field.
Further Problem Description:
|
|
Last Modified: | 02-JUL-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz45002 | Title: | UCSD5.4.0.2/Service Profile Fails to copy all System Policy param values |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
Service Profile Fails to copy all System Policy param values
Conditions:
Create a System Policy that has the Windows & Linux and Boot Wait Time values set to 5 minutes
Create Service Profile vDC using above system policy
Given wait time was not applied for the newly created vDC and the value was obtained as default
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0), 5.4(0.1) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCup86283 | Title: | 'User Input Mapping' is not available for the field Management VLAN |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
Since the VLAN input is not mappable, user will not be able to specify this value as a Workflow input or select from a previous task output.
Conditions:
None
Workaround:
The VLAN input can be edited by editing the "Setup PXE Boot" task in the workflow editor.
Further Problem Description:
None
|
|
Last Modified: | 08-JUN-2016 |
|
Known Affected Releases: | 4.1(0.2) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCul24785 | Title: | No error message when fcalias not exist in Add Member to SAN Zone |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Task accepting an member name which is not present and not throwing error for unknown member
Symptom:
Task not throwing error for unknown member added to the san zone
Conditions:
When an unknow memebr is passed, task should fail
Workaround:
Further Problem Description:
|
|
Last Modified: | 08-JUN-2016 |
|
Known Affected Releases: | 4.100 |
|
Known Fixed Releases: | 5.4(0.2), 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCur71241 | Title: | eanLAT 1_UCS Director_KO-Korean font issue |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
As per feedback from Korean regional sales team for their customer demo, "Malgun Gothic" font is to be used that is the default Korean Font of Windows.
Conditions:
Only for Korean language
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 4.0 |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz92342 | Title: | Validation issues in splunk server roles during splunk cluster creation |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
Hostname prefix accepts numeric value and the splunk server roles section is not highlighted on submit with empty values.
Conditions:
NA
Workaround:
Provide correct input for the Hostname prefix and splunk server roles.
Further Problem Description:
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: * | 6.0(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva20876 | Title: | LAT1 - UCSD Fishing Bay - GL - Script 2 - Slide 2 - Other-Functionality |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
The string codeappears instead of the translated text.
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 24-JUN-2016 |
|
Known Affected Releases: | 6.0(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva20865 | Title: | UCSD Fishing Bay - GL- Script 2 - Slide 18 - Other Functionality |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
The hover over messages show the string code instead of the translated text.
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 24-JUN-2016 |
|
Known Affected Releases: | 6.0(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva19138 | Title: | LAT1 - UCSD Fishing Bay - GL - Script 1 - Slide 11 - Other-Functionality |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
The string code appears instead of the translated text.
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 6.0(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva20770 | Title: | LAT1 - UCSD Fishing Bay - GL - Script 3 - Slide 5 - Hardcoded-Item-Loc |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
The strings are in English instead of showing the translated text.
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 23-JUN-2016 |
|
Known Affected Releases: | 6.0(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuz76043 | Title: | Default Cost Computation Period Settings always appear |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
During SR creation, we should show cost computation period only for Standard type. Other types like, Advanced & Container we should not show cost computaion period.
Conditions:
Cost computation is coming during container creation
Workaround:
Workaround is not required for this issue. Because, during SR creation showing only cost computation period. Also, this value is not used for cost calculation.
Further Problem Description:
Cost computation is applicable only for Standard type Service request. Need to restrict other type(Advanced, container).
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux98037 | Title: | numbering scheme misalignment between log and string of pearls view |
|
Status: | Fixed |
|
Severity: | 5 Cosmetic |
Description: | Symptom:
Numbering scheme misalignment between SR logs and string of pearls view(SR workflow status page)
Conditions:
After WF execution completed, the task 1 in the SR log appears as task 2 in the string of pearls view(SR Workflow Status page) & this misalignment continues throughout the entire workflow execution so that all the tasks are misaligned by 1
Workaround:
None.This is a cosmetic issue
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.0), 5.4(0.1) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux17067 | Title: | Per user language |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Language changing system-wise not per user of UCSD, actually feature is available to select language user-wise by assigning language to the user, for more info please refer enclosures
Conditions:
During user creation of UCSD there is one option to select language, if you want to see UI in specific language then you must have to select that language.
Workaround:
I have attached UT how to select language during user creation of UCSD. you can create number of users with different specified language shown in snapshot attached enclosures, Admin can stay in English other users can access with different language as specified to user
Further Problem Description:
NA
|
|
Last Modified: | 08-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCva26565 | Title: | LAT1 - UCSD 5.5 - FR - Part 1 - Slide 29 - Linguistic |
|
Status: | Open |
|
Severity: | 6 Enhancement |
Description: | Symptom:
English: Select Device(s)
Wrong French: S?lectionnez les appareils.
Correct French: S?lectionner des appareils
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 29-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy18082 | Title: | vNIC support required for Standard Vms |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Adding vNIC to Standard VMs
Conditions:
Add provided vNIC to VM with given IP address and mask. If IP address is not provided, look for available IP pool policy in UCSD and get free IP address to add vNIC to VM
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 08-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuv66743 | Title: | Multiline inputvalues should work whenmap admin or user i/p to Cust.Task |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Multiline input values not working when map as admin or user input to Custom Task
Conditions:
Multiline input values are not working when we mapped as user input or admin input to Custom Task while adding the Custom Task in WF
Workaround:
Map the task input to Custom Task, while adding the Custom task in WF
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.4(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux55316 | Title: | SYSTEM_STATE update for tasks should not delete and insert |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
The entries of the SYSTEM_STATE task were deleted and added back to update the status because
of which the respective Task Entry was lost due to failures when adding it back.
Conditions:
This could happen as the System Task is transitioned through the states.
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 08-JUN-2016 |
|
Known Affected Releases: | 5.3(0.0), 5.4(0.0), 5.5(0.0) |
|
Known Fixed Releases: | 5.3(2.2), 5.4(0.2), 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw28377 | Title: | Enhancement to add column to view User type for group admin |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Group Admin is able to see all of his users, but is not able to see, which User is part of which user type,
Conditions:
Login as Group Admin and check the user report for individual user access role type
Workaround:
None - This is enhancement added as part of UCSD 5.5 release
Further Problem Description:
|
|
Last Modified: | 01-JUN-2016 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy72404 | Title: | IP Address Returned to Pool After VM Crash or Shutdown Without Rollback |
|
Status: | Open |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Static IP addresses for a VM is returned to the IP address pool in UCSD.
Conditions:
The issue is noticed if the IP address for the VM is not visible in vCenter.
IP address is lost if the VM is powered off, suspeneded, OS is corrupted, Network corrupted etc.
Workaround:
1) If an IP address has been assigned to another VM, go into that VM's console and manually remove it from the VM.
2) If you have completed step 1, or if the IP address simply appeared as "available" in the IP pool once more, power on the original VM that held (or still holds) the IP address in its network settings.
3) Run a VMware Cloud Inventory in UCS Director's Administration > System > System Tasks.
4) Verify that the IP address no longer appears available in the IP pool
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.3(1.2) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux75151 | Title: | ESB:US2071-VNC Console: Support for different Keyboard Layout |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
VNC Console: Support for different Keyboard Layout
Conditions:
Provide Keyboard layout selection in Configure VNC action button
User can able to give desired language keyboard using this
Workaround:
NA
Further Problem Description:
Complete Enhancement request
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | 5.4(0.2), 5.5(0.0) |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuz17758 | Title: | Reduce UCSD Task Execution Wait Time |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Taking more delay/waiting time to complete execution of workflow tasks
Conditions:
Taking minimum of 3 seconds & a maximum of 9 seconds delay/waiting time to complete the execution of WF task to next WF task
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 09-JUN-2016 |
|
Known Affected Releases: | 5.5(0.0) |
|
Known Fixed Releases: | 5.5(0.0) |
|
|
| |
2015 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论