| |
|
Alert Type: | Updated * |
Bug Id: | CSCux42903 | Title: | ASR9912: Duplicate alias keys in PortData causing mess in LAG inventory |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
ASR9912 VNE physical command parser creates duplicate alias keys for multiple PortData IRDs.
Conditions:
ASR9912 with CPAK interfaces
Workaround:
There is no workaround for this defect
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP1511.0.742 |
|
Known Fixed Releases: * | 4.1DP1601, 4.2(1)DP1601, 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw98564 | Title: | NIOTelnetCollector cannot recover when loosing current command |
|
Status: | Other |
|
Severity: | 2 Severe |
Description: | Symptom:
NIOTelnetCollector errors of type "NIOTelnetCollector.processResult - 10.178.72.32 command not executing - ignoring result"
Conditions:
Not known
Workaround:
There is no workaround for this issue
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.1(0.1)PP2 |
|
Known Fixed Releases: * | 4.2(0.1)PP5, 4.2(0.1)PP6, 4.2(2.0)PP3 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux54694 | Title: | Fatal NullPointerException in AVM100 shuts down event processors |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Due to Fatal NullPointerException in AVM100 the event processors for VNEs are getting shut down and the notifications are getting dropped.
Conditions:
Temporary loss of communication between VNE and AVM100, which causes renewal of event processors for VNE.
Workaround:
Restart AVM100
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.1(0.1)PP2 |
|
Known Fixed Releases: * | 4.2(0.1)PP6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux58094 | Title: | NexusC7706 multi-chassis VNE: missing line cards in the main chassis |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
While modeling NexusC7706 multi-chassis switch, Version 6.2(10), it was noticed that VNE erroneously models physical inventory of the main chassis: Missing all the cards, SFP transceivers are modeled as modules.
Conditions:
NexusC7706 multi-chassis switch, Version 6.2(10)
Workaround:
Not known
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1511.0.742 |
|
Known Fixed Releases: * | 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu36668 | Title: | Asr901: Issues in IS-IS technology |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * |
Symptom:
Issues:
1)Duplicate column 'IS Type' needs to be removed from PN421
2)IS Type column values needs to be populated in PN41 and PN42
Note: Values under this column are populating in PN40 and PN421
Conditions:
Steps To Reproduce:
1)Model Asr901 device
2)LI-->IS-IS
Expected Result:
1)Duplicate column needs to be removed
2)Values should be populated under IS Type column
Workaround:
Not Applicable
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 23-JAN-2016 |
|
Known Affected Releases: | 4.2(0.1)PP4 |
|
Known Fixed Releases: | 4.2(0.1)PP4, 4.2(2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuq88548 | Title: | 9K, 9904 :Some execution of out of the box command stuck |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
When run Run "Create SyncE Clock Global" out of the box command with some parameters,
The command stuck
The issue was seeing on ASR9006 and on ASR9904
Conditions:
Workaround:
Further Problem Description:
|
|
Last Modified: | 22-JAN-2016 |
|
Known Affected Releases: | 4.1(0X)DP1601.0.751 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut61852 | Title: | ClassNotFoundException of IReferencedNetworkTpTunnelAttrsAspectOid 11 |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
ClassNotFoundException of IReferencedNetworkTpTunnelAttrsAspectOid appear on avm 11,
and TP tunnel link is gray
WARN [03 29 2015 17:18:21.411 IDT] - Get.getRequiredAspects - java.lang.ClassNotFoundException: com.sheer.imo.keys.IReferencedNetworkTpTunnelAttrsAspectOid
java.lang.ClassNotFoundException: com.sheer.imo.keys.IReferencedNetworkTpTunnelAttrsAspectOid
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
Conditions:
1. Model 7600 and ASR9K
2. From PN Vision choos MPLS-TP Tunnel as overlay Type and choose TP tunnel
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 25-JAN-2016 |
|
Known Affected Releases: * | 4.1(0.1)PP0, 4.2(0.1)PP6, 4.2(2.0)PP2 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux35310 | Title: | Port Status showing Unknown in 7.0(3)I2(2) image in for Nexus 9K Devices |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * |
Symptom:
Port status is showing as Unknown on VNE initialization. Port down service alarm is not developing.
Conditions:
Any Nexus device
Workaround:
Manual registry change commands:
runRegTool.sh -gs localhost add 0.0.0.0 site/cisco-nexus-repository/port-status-and-module-status
runRegTool.sh -gs localhost set 0.0.0.0 site/cisco-nexus-repository/port-status-and-module-status/readoninit true
runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-nexus-repository/port-status-and-module-status/instrumentation services"
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-status-and-module-status/instrumentation services/interval" status
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-status-and-module-status/instrumentation services/class" com.sheer.metrocentral.framework.instrumentation.service.RepetitiveExecutionService
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-status-and-module-status/instrumentation services/factory" com.sheer.metrocentral.framework.instrumentation.service.RepetitiveExecutionServiceFactory
runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-nexus-repository/port-state-and-module-status/instrumentation services"
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-state-and-module-status/instrumentation services/onchange" false
runRegTool.sh -gs localhost add 0.0.0.0 site/cisco-nexus-repository/port-properties-telnet
runRegTool.sh -gs localhost set 0.0.0.0 site/cisco-nexus-repository/port-properties-telnet/readoninit true
runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-nexus-repository/port-properties-telnet/instrumentation services"
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-properties-telnet/instrumentation services/class" com.sheer.metrocentral.framework.instrumentation.service.RepetitiveExecutionService
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-nexus-repository/port-properties-telnet/instrumentation services/factory" com.sheer.metrocentral.framework.instrumentation.service.RepetitiveExecutionServiceFactory
Further Problem Description:
(release notes added by addprefcs-org.ksh)
|
|
Last Modified: | 25-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP1509.0.702 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux53448 | Title: | InfoBright is flooding avm25 log and causing it to crash |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
floods of
java.sql.SQLException: Could not commit with auto-commit set on
in avm 25 log and even crash of avm 25
Conditions:
InfoBright installed. High event rate.
Workaround:
stop InfoBright.
Further Problem Description:
|
|
Last Modified: | 25-JAN-2016 |
|
Known Affected Releases: | 4.2(1.0)PP1, 4.2(2.0)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux56356 | Title: | webstart CCM link converts dashboard page to CCM login page |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Webstart launch page (
http://:6080/ana/services/install/install/webstart.html) gets redirected to CCM login page.
Conditions:
On clicking CCM link in webstart page.
Workaround:
none.
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.2(2.0)PP3 |
|
Known Fixed Releases: * | 4.2(0.1)PP6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun20740 | Title: | PN: Nexus 7K IPv6 routing table is not updated even after poll now. |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Nexus 7K IPv6 routing table is not updated even after poll now.
Symptom:
Nexus 7K IPv6 routing table is not updated even after poll now.
Only stop/start to the VNE updates the IPv6 routing table.
Conditions:
1.Model Nexus 7010
2. Add IPv6 loopback interface
2. Open Inventory -> Logical Inventory -> CS1-N7K-CA context -> Routing Entities -> Routing Entity
3. Go to IPv6 Routing Table.
The routing table was not updated
4. Press on Poll now
The route table still not updated.
Workaround:
Restart the VNE.
Further Problem Description:
|
|
Last Modified: | 21-JAN-2016 |
|
Known Affected Releases: | 4.0(0X)DP1401 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux61923 | Title: | Interface Ethernet 1/2 down/ UP syslog does not correlate in ticket |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
The PORT UP service appears in EVENT hence expecting there must be PORT Down service should appear as well
PORT down service does not appear in EVENT
Conditions:
Ethernet interface of the Line cards on Nexus 9K while doing OIR
Workaround:
No
Further Problem Description:
|
|
Last Modified: | 18-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP1509.0.702 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut98009 | Title: | Save/cancel buttons on IE11 are hidden on VCB Add new Module |
|
Status: | Terminated |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Save/cancel buttons on IE11 are hidden on VCB Add new Module
Conditions:
1. Try to add new Module for Nexus5K using VCB via IE11
Workaround:
Try to search the hidden button and press on it.
Or use another browsers
Further Problem Description:
This issue was not reproducible in IE 11, for the PN version 421, 422 and 423. Hence it is assumed that it could have occurred on a previous subversion of IE 11.
|
|
Last Modified: | 13-JAN-2016 |
|
Known Affected Releases: | 4.2(0.1)PP2 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun91887 | Title: | Card out of CRS-MSC-X changes the card name in inventory |
|
Status: * | Terminated |
|
Severity: | 3 Moderate |
Description: | Symptom:
Card out of CRS-MSC-X
Conditions:
on CRS X 5.1.2
Workaround:
NA
Further Problem Description:
|
|
Last Modified: | 04-JAN-2016 |
|
Known Affected Releases: | 3.10(11)XDP1405.0.881, 4.0, 4.1, 4.2, 4.2(1), 4.2(2) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus36751 | Title: | NEXUS7K card content disappear after card down |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
NEXUS7K content disappear after card down
Conditions:
1. Model Nexus7K
2. Card down Nexus7K ((config)# poweroff module 1)
Workaround:
Further Problem Description:
|
|
Last Modified: | 06-JAN-2016 |
|
Known Affected Releases: * | 4.1(0X)DP1411.0.502, 4.2(0X)DP1503.0.581, 4.2(0X)DP1509.0.702, 4.2(1)DP1505.0.622 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuy02060 | Title: | CRS1: SIP card down alarms is not cleared due to sub-card down |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
When running SIP card reload on CRS1 router the corresponding 'Card down' alarm is not cleared due to correlated 'Card down' alarms for sub-cards. Poll Now does not change sub-card status either.
Conditions:
SIP card reload on CRS1 router
Workaround:
Manual registry changes:
runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-router-iox-repository/crs-module-status-snmp-telnet/instrumentation services"
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-router-iox-repository/crs-module-status-snmp-telnet/instrumentation services/evne-interval" configuration
runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-router-iox-repository/crs-module-status-snmp-telnet/instrumentation services/onchange" false
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.1(0X)DP1511.0.742, 4.2(0X)DP1511.0.742, 4.2(2)DP1511.0.742 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuu44017 | Title: | Link disappear between ASR902 to 2800 after ASR902 card in |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Link disappear between ASR902 to 2800 after ASR902 card in,
meaning that the link stay after card out and disappear after card in
Conditions:
1. Model ASR902, and 2800
2. card out ASR902 card
3. Card in the card
Workaround:
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.1(0.1)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw75339 | Title: | Generic Server is not processing all parsing rules patterns |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Generic Server is not processing all parsing rules patterns
Conditions:
added patterns in vcb
Workaround:
none
Further Problem Description:
none
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1507.0.671, 4.2(1)DP1507.0.663 |
|
Known Fixed Releases: * | 4.2(2)DP1601, 4.2DP1511 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux30855 | Title: | Incorrect BGP peer state is displayed when it is admin shut down |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Network Vision displays incorrect BGP peer state when it is admin shut down
Conditions:
BGP peer state is admin shut down.
Workaround:
Not available
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1509.0.702 |
|
Known Fixed Releases: * | 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv93253 | Title: | FEC-129 PWs discovered in PN422 display as disabled /inactive on upgrade |
|
Status: | Terminated |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Encountered for the following installation order:
Install PN 4.2.2 FCS build > Model VNEs > Select FEC 129 pseudowires and associated components (bridges) from the respective discovery plugins such as bridge domain, VPLS, pseudowire and EVC > Install DP > Install PP.
Conditions:
Install Pn422 and model VNES -> all the FEC-129psuedowires discovered in various plugins which display as active , become inactive or disabled on upgrading to PP
Workaround:
Delete all the maps that were created before the installation of the PP so that the disabled or inactive components do not display.
Also on manually selecting the FEC-129 pws components again from PW ,VPLS and EVC discovery , the accurate discovery of FEC-129 PW can be seen.
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP1508.0.671 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux26974 | Title: | TenGig Ethernet dwdm media type fails to be modeled for ASR 901 |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Ethernet interfaces with media type as DWDM-49.31 is missing in Prime network vision physical inventory.
Conditions:
media type is DWDM.
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP0.0.661 |
|
Known Fixed Releases: * | 4.1DP1601, 4.2(1)DP1601, 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux24698 | Title: | UCS6200 VNE missing fan modules in FabricInterconnect chassis |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Physical inventory of both FabricInterconnect chassis of UCS6200 is missing fan modules.
Conditions:
UCS6200
Workaround:
Not known
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1511.0.742, 4.2(2)DP1509.0.702 |
|
Known Fixed Releases: * | 4.2(1)DP1601, 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw92015 | Title: | old archive logs are not deleted from system |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
old DB files are not deleted
Conditions:
Oracle 12c
Workaround:
change the clean_log.pl script to use -S -L instead -SL
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.2(0.1)PP5, 4.2(1.0)PP1, 4.2(2.0)PP2 |
|
Known Fixed Releases: * | 4.2(0.1)PP6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux09483 | Title: | NCCM: Image Files are not fetched from external Server to distribute |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
External repository from the Change and Configuration management(CCM) (Images->Repository->Import External Repository) showing as No data available
Conditions:
When external server is used with different date format.
Workaround:
Check whether "ls -l" on the external server returning as below format.
pn@tier4-rhel-vm10 [~/XMP_Platform]% ls -l
drwxr-x--- 9 user group size MMM DD HH:MM
Example:
% ls -l
drwxr-x--- 9 test grp 10 Oct 21 10:16 test.txt
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.2(2) |
|
Known Fixed Releases: * | 4.2(0.1)PP6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu84813 | Title: | lotem ssh ghost connection prevents new connections |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
VNE looses ssh connection after device reload and does not recover SSH Connection once device is available
Conditions:
Conditions:
* device ASR 920
* VNE up and running connected via ssh
* device is reloaded
Workaround:
restart VNE
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.1(0)PP4, 4.2(0.522), 4.2(1.0)P1, 4.2(1.0)PP1 |
|
Known Fixed Releases: * | 4.1(0.1)PP2, 4.2(0.1)PP3, 4.2(0.1)PP4, 4.2(0.1)PP6, 4.2(2) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuy03754 | Title: | ASR903: Missing VNE scheme for software version 15.4(3)S |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: * | Symptom:
While modeling ASR903 in PN4.2.0 DP1511, the customer noticed that previously supported in PN3.10 software version 15.4(3)S2 is not supported in any of PN4.2.x releases.
Conditions:
Modeling of ASR903 in PN4.2.x
Workaround:
Clone the device software version in VCB
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1511.0.742 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux54000 | Title: | PN 4.2 System alarms documentation correction |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: * | Symptom:
Document is not updated.
Conditions:
Replication failure - Database replication failed
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 10-JAN-2016 |
|
Known Affected Releases: | 4.2(0)PP999 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux97066 | Title: | CRS8S: VRFInterfaceData has null for interface key, fails associate |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: * | Symptom:
VrfInterfacesCommandHandler.addRelations fails to add relations for VRF due to null value for interface(s) key(s).
Conditions:
Configuration of VRF on CRS1.
Workaround:
There is no workaround for this issue
Further Problem Description:
|
|
Last Modified: | 27-JAN-2016 |
|
Known Affected Releases: | 4.2(2)DP1511.0.742 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux47455 | Title: | Firefox network discovery result page does not have vertical scroll bar |
|
Status: | Terminated |
|
Severity: | 4 Minor |
Description: * | Symptom:
vertical scroll bar is not visible.
Conditions:
In Firefox, the "Discovery profiles", "Discovery results" pane shift right.
Workaround:
Works fine in IE and chrome.
Further Problem Description:
The issue is not reproducible.
|
|
Last Modified: | 23-JAN-2016 |
|
Known Affected Releases: | 4.2(1.0)PP1 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux65212 | Title: | PN -GUI interaction - discovery profile scroll issue |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: * | Symptom:
data entry blocked because of scrolling problems;
Conditions:
screen resolution or browser window size limits space to display all data and forms
Workaround:
zoom out in the browser to see more of the page all at once, this could make the data unreadable
Further Problem Description:
|
|
Last Modified: | 29-JAN-2016 |
|
Known Affected Releases: | 4.2(0.1)PP0 |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv38281 | Title: | Trap names requires correction between starOS 14.x to 17.x |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
Notification names are mismatching between two OS versions.
Conditions:
When using StartOS 17.x
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 26-JAN-2016 |
|
Known Affected Releases: | 4.2(1)DP1505.0.622 |
|
Known Fixed Releases: * | 4.2(0.1)PP6 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux42779 | Title: | Command Builder "syslog host logging" console shown as "Severity Level" |
|
Status: | Fixed |
|
Severity: | 5 Cosmetic |
Description: | Symptom:
Label is confusing.
Conditions:
Command builder "Syslog Host Logging"
Workaround:
None.
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(1) |
|
Known Fixed Releases: * | 4.1DP1601, 4.2(1)DP1601, 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux37433 | Title: | Nexus7K VNE fails to parse %INTERFACE_VLAN-5-UPDOWN syslog |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Nexus7K VNE fails to parse %INTERFACE_VLAN-5-UPDOWN syslog
Conditions:
VLAN interface down/up on Nexus7K device
Workaround:
Not available
Further Problem Description:
|
|
Last Modified: | 28-JAN-2016 |
|
Known Affected Releases: | 4.2(0X)DP1509.0.702 |
|
Known Fixed Releases: * | 4.1DP1601, 4.2(1)DP1601, 4.2(2)DP1601, 4.2DP1601 |
|
|
| |
2015 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论