| |
|
Alert Type: | Updated * |
Bug Id: | CSCum58278 | Title: | npu_drv not to handle delete in unexpected invmgr notification |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
npu_driver not to handle delete in unexpected callbacks causing fib restart
Conditions:
on NCS-6k , fib_mgr may restart due to npu_driver not to handle delete in unexpected callbacks
Trigger can be LC OIR , LC reload or LC XR VM reload
Workaround:
None but it recovers after the crash but there are chances that process may get blocked on the LC
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: | 5.0.1.BASE, 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux37829 | Title: | NCS6K: All RP/SCs calvados promt without node info after powercycle |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
NCS6K: All RP/SCs calvados promt without node info after powercycle and none of XR VMs are spawned
Conditions:
NCS6K: All RP/SCs calvados promt without node info after powercycle and none of XR VMs are spawned
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 24-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.39i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux29341 | Title: | Owner channel connections out of sync for lldp and spio in SS |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
RP/0/RP0/CPU0:A41#sh im status brief
conn.05 9 Owner channel client-side connection out-of-sync
Client: lldp_agent (jid 213, cb handle 0x00060020 L3P 3P - ID 48) on node 0/0/CPU0, Owner: spio_ma (cbh
0x2017bf00 L3P 3P - ID 48) on node 0/0/CPU0
conn.06 9 Owner channel owner-side connection out-of-sync
Owner: spio_ma (jid 186, cb handle 0x2017bf00 OWN CAPS - ID 189[-]) on node 0/0/CPU0, Client: lldp_agent (cbh
0x00060020 OWN CAPS - ID 189[-]) on node 0/0/CPU0
Conditions:
RP/0/RP0/CPU0:A41#sh im status brief
conn.05 9 Owner channel client-side connection out-of-sync
Client: lldp_agent (jid 213, cb handle 0x00060020 L3P 3P - ID 48) on node 0/0/CPU0, Owner: spio_ma (cbh
0x2017bf00 L3P 3P - ID 48) on node 0/0/CPU0
conn.06 9 Owner channel owner-side connection out-of-sync
Owner: spio_ma (jid 186, cb handle 0x2017bf00 OWN CAPS - ID 189[-]) on node 0/0/CPU0, Client: lldp_agent (cbh
0x00060020 OWN CAPS - ID 189[-]) on node 0/0/CPU0
Workaround:
none
Further Problem Description:
RP/0/RP0/CPU0:A41#sh im status brief
conn.05 9 Owner channel client-side connection out-of-sync
Client: lldp_agent (jid 213, cb handle 0x00060020 L3P 3P - ID 48) on node 0/0/CPU0, Owner: spio_ma (cbh
0x2017bf00 L3P 3P - ID 48) on node 0/0/CPU0
conn.06 9 Owner channel owner-side connection out-of-sync
Owner: spio_ma (jid 186, cb handle 0x2017bf00 OWN CAPS - ID 189[-]) on node 0/0/CPU0, Client: lldp_agent (cbh
0x00060020 OWN CAPS - ID 189[-]) on node 0/0/CPU0
|
|
Last Modified: | 24-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.39i.FWDG, 6.1.0.9i.FWDG |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux63803 | Title: | Rsvp crashed on stdby RP during ISSU smu install, causing ISSU to abort |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Rsvp crashed on stdby RP during ISSU smu install, causing ISSU to abort
Conditions:
Rsvp crashed on stdby RP during ISSU smu install, causing ISSU to abort
Workaround:
none
Further Problem Description:
Rsvp crashed on stdby RP during ISSU smu install, causing ISSU to abort
|
|
Last Modified: | 24-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.39i.MPLS |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw74489 | Title: | After successive optics oir, interfaces does not come up on that slice |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
interfaces does not come up on that slice
Conditions:
After successive optics oir
Workaround:
reload lc
Further Problem Description:
After successive optics oir, interfaces does not come up on that slice
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: * | 5.2.4.BASE, 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.38i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw26390 | Title: | mibd_interface crash when polling on sunstone from multiple NMS |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Process Crash
Conditions:
Polling of 1.3.6.1.4.1.9.9.276.1.1.3.1
Workaround:
Exclude 1.3.6.1.4.1.9.9.276.1.1.3.1 OID
Further Problem Description:
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: | 6.0.0.BASE, 6.1.1.CE |
|
Known Fixed Releases: * | 5.2.5.38i.BASE, 6.0.0.26i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuw57440 | Title: | SU failed with install commit error though commit not required. |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
If XR VM is shut down, then user cannot get diagnostic information when he types
# show tech install
Conditions:
If user deploys a faulty rpm that causes issues with system bringup on XR, and user wants to diagonize what went wrong -the fact that xr VM is down will prevent him from getting that info.
Workaround:
manually mount the VM's xr_lv and xr_data_lv and collect logs from host VM.
More Info:
|
|
Last Modified: | 18-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | 5.2.5.33i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCur34494 | Title: | L2VPN traffid drop at PE, hitting Unknown VLAN Pkts ctr at npu instance1 |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
L2VPN traffid drop at PE, hitting Unknown VLAN Pkts ctr at npu instance1 after npu_driver restart
Conditions:
L2VPN traffid drop at PE, hitting Unknown VLAN Pkts ctr at npu instance1 after npu_driver restart
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.2.3.BASE |
|
Known Fixed Releases: * | 5.2.3.12i.BASE, 5.2.4.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCum93668 | Title: | Continuous NPU Driver Crash followed by LC Reload |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
Continuous npu_driver crash & LC reload
Conditions:
Performing Install operation like Kernel SMU activation which runs into error for few nodes of the NCS system running XR501 image
Workaround:
Ensure that there are no install errors by keeping the install space clean by removing inactive packages & ensuring that all the LC of the system are properly functional when install operation is being performed
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: | 5.2.1.20i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCui65871 | Title: | CLI doesn't provide DoM/Threshold value for CPAK |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptoms :
Customer can't see any information about DOM/Threshold value with CPAK
Condition :
Regardless of conditions , customer can't verify this information on the router
Workaround :
None
Symptom:
Customer can't see any information about DOM/Threshold value with CPAK
Conditions:
Regardless of conditions , customer can't verify this information on the router
Workaround:
none
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.0.BASE, 5.0.1.BASE |
|
Known Fixed Releases: * | 5.0.1.11i.ADMIN, 5.0.1.5i.ADMIN, 5.0.1.6i.ADMIN, 5.0.1.7i.BASE, 5.2.1.1i.BASE, 5.2.2.6i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuj11266 | Title: | npu_driver crashed and led XR VM reload after process restart npu_driver |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
continuous crashes and causing LC XR VM reload.
Conditions:
Workaround:
Further Problem Description:
Crash file details:
-rw-r--r-- 1 root root 23531969 Sep 7 11:50 /misc/scratch/core/npu_driver_5585.by.11.20130907-114950.xr-vm_node0_0_CPU0.689fb.core.gz
-rw-r--r-- 1 root root 300 Sep 7 11:49 /misc/scratch/core/npu_driver_5585.by.11.20130907-114950.xr-vm_node0_0_CPU0.689fb.core.txt
-rw-r--r-- 1 root root 23532563 Sep 7 11:48 /misc/scratch/core/npu_driver_5406.by.11.20130907-114828.xr-vm_node0_0_CPU0.689fb.core.gz
-rw-r--r-- 1 root root 300 Sep 7 11:48 /misc/scratch/core/npu_driver_5406.by.11.20130907-114828.xr-vm_node0_0_CPU0.689fb.core.txt
-rw-r--r-- 1 root root 23534446 Sep 7 11:49 /misc/scratch/core/npu_driver_5488.by.11.20130907-114911.xr-vm_node0_0_CPU0.689fb.core.gz
-rw-r--r-- 1 root root 300 Sep 7 11:49 /misc/scratch/core/npu_driver_5488.by.11.20130907-114911.xr-vm_node0_0_CPU0.689fb.core.txt
Core file (/misc/scratch/core/npu_driver_5585.by.11.20130907-114950.xr-vm_node0_0_CPU0.689fb.core.gz) is successfully copied to /auto/rp_dt_panini/jiemiwan/DTHO/cores//npu_driver_5585.by.11.20130907-114950.xr-vm_node0_0_CPU0.689fb.core.gz.
show logging copied to /auto/rp_dt_panini/jiemiwan/DTHO/cores//LC-xr-vm_node0_0_CPU0-show_logging-npu_driver-2013Sep7-120739.gz.
========== show version ==========
Cisco IOS XR Software, Version 5.0.0.39C Copyright (c) 2013 by Cisco Systems, Inc.
Build Information:
Built By : agunalan
Built On : Wed Sep 4 17:12:26 PDT 2013
Build Host : sjc-ads-2168
Workspace : /nobackup/agunalan/ncs6k-xr-optim-dt-image
Version : 5.0.0.39C
Location : /opt/cisco/XR/packages/
System uptime is 1 hour, 3 minutes
Attribute used for tracking DDTS reported by PAM: 50_PAM.
--- router localtime: Sat Sep 7 12:07:39 2013. system uptime: 535.58 (seconds) ---
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.0.BASE |
|
Known Fixed Releases: | 5.0.0.40i.BASE, 5.0.0.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCul95931 | Title: | npu_driver crash at npu_tm_rem_error_interrupt_handler on err inj |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
npu_driver crashes upon interrupt injection and all NPU blocks are not enabled after crash
Conditions:
This condition is hit when asic undergoes PON reset in REM2 block in ASIC.
Traffic forwarding is affected as asic recovery is incomplete
Workaround:
None
Further Problem Description:
This is seen with specific pon reset and not seen with all pon resets
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.LC |
|
Known Fixed Releases: * | 5.0.1.14i.BASE, 5.1.3.16i.BASE, 5.1.3.18i.BASE, 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux68219 | Title: | Slice 0,2,4 shutdown causing slice 1 links to go down, REMOTE_DYING_GASP |
|
Status: | Open |
|
Severity: | 2 Severe |
Description: | Symptom:
Slice 0,2,4 shutdown causing slice 1 links part of bundles to go down, ethernet_link_oam_daemon[313]: %L2-ELO-6-INTF_REMOTE_DYING_GASP : TenGigE0/0/0/2/3: Remote dying gasp detected, with reason: Error-Disable
Conditions:
Slice 0,2,4 shutdown causing slice 1 links part of bundles to go down, ethernet_link_oam_daemon[313]: %L2-ELO-6-INTF_REMOTE_DYING_GASP : TenGigE0/0/0/2/3: Remote dying gasp detected, with reason: Error-Disable
Workaround:
none
Further Problem Description:
Slice 0,2,4 shutdown causing slice 1 links part of bundles to go down, ethernet_link_oam_daemon[313]: %L2-ELO-6-INTF_REMOTE_DYING_GASP : TenGigE0/0/0/2/3: Remote dying gasp detected, with reason: Error-Disable
|
|
Last Modified: | 26-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCul56758 | Title: | 5.0.1 PAT : NPU hard reset after LC OIR - credit_consume_overflow_error |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
Interface creation fails with external TCAM initialization failre after LC reload or XR M reload
Conditions:
Card reload or XR VM reload
Workaround:
LC reload
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.LC |
|
Known Fixed Releases: | 5.0.1.16i.BASE, 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCun75400 | Title: | ARP is not getting resolved on some interfaces on L2VPN scale setup. |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
ARP is not getting resolved on some interfaces on L2VPN scale setup.
Conditions:
Arp packets dropped as Unknown VLAN Pkts/Packet Policy Deny
Workaround:
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.2.1.BASE |
|
Known Fixed Releases: | 5.2.1.20i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuj67322 | Title: | P-RDI counts doesnt increment when P-RDI defect asserted |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: * | Symptom:
PRDI not detected
Conditions:
When Path RDI is asserted via JDSU it is not detected.
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: | 5.2.1.1i.BASE, 5.2.2.6i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw47969 | Title: | NCS6K LC interfaces missing after a system reload |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:Some Linecard's (LC) on an NCS 6008 may be missing interfaces after a SMU install and reload, or a manual system reload or powercycle.
Conditions:This may occur on an NCS 6008 router running IOS XR version 5.2.4 with SMU for CSCuv97943
Workaround:Reload the LC from admin mode via "hw-module location r/s reload". The missing interfaces will get created and come up operationally.
More Info:After reloading the LC, it will take a few minutes for the interfaces to come up, approximately 5-8 minutes. You can verify via "show interface brief location r/s/cpu0" from the xrvm.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.4.BASE, 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.30i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux37549 | Title: | ISIS NSR not ready due to some purged lsps not in active but in stby |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
ISIS proc crash causing ISIS NSR not ready for instance ISIS_core. L2 LSP information on V1 active and v1 standby is different in "sh isis nsr statistics"
Conditions:
ISIS proc crash causing ISIS NSR not ready for instance ISIS_core. L2 LSP information on V1 active and v1 standby is different in "sh isis nsr statistics"
Workaround:
none
Further Problem Description:
ISIS proc crash causing ISIS NSR not ready for instance ISIS_core. L2 LSP information on V1 active and v1 standby is different in "sh isis nsr statistics"
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 6.0.1.8i.ROUT, 6.1.0.11i.ROUT |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw76350 | Title: | NCS6k ISSU aborted due to BGP process restart |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Upon ISSU SMU uprade on NCS6K running 5.2.3 image, ISSU aborted the install dur to BGP process restart
Conditions:
Workaround:
perform RP failover when redundancy is NSR-ready mode, then perform ISSU upgrade once the Standby become active is redundancy is NSR -ready
Further Problem Description:
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.3.BASE |
|
Known Fixed Releases: * | 6.1.0.11i.FWDG |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux23067 | Title: | Breakout config apply removal causing slice to go OPER DOWN on CPACK LC |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Breakout config apply and removal on a CPACK causing SLICE to stuck in OPERATIONAL DOWN state
Conditions:
Breakout config apply and removal on a CPACK causing SLICE to stuck in OPERATIONAL DOWN state
Workaround:
LC OIR
Further Problem Description:
Breakout config apply and removal on a CPACK causing SLICE to stuck in OPERATIONAL DOWN state
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.36i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw93727 | Title: | Rx is disabled on CPAK tengig port on an NCS 6008 |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
A tengig interface on an NCS 6008 may not come up operationally.
Conditions:
This may occur on an NCS 6008 router running IOS XR version 5.2.4, on tengig CPAK ports when in breakout mode.
Workaround:
Shut the slice down, then bring the slice back up, from configuration mode.
Example:
config t
hw-module location 0/3/cpu0 slice 0 shutdown
commit
no hw-module location 0/3/cpu0 slice 0 shutdown
commit
Verify that "Rx is enabled" via "show controller tengig x/x/x/x/x phy" output.
Further Problem Description:
The "show controller tengig x/x/x/x/x phy" will show a "Rx is disabled" status even though the CPAK status is good and the optical dBM levels are good.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: * | 5.2.5.33i.BASE, 6.1.0.11i.BASE, 6.1.0.11i.FWDG |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu47257 | Title: | PLX devices stuck in UPG_PREP and eventually timing out |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:If the PLX EEPROM version becomes 0.0 for some reason, "show hw-module fpd" output for that PLX device will show 0.0 and NEED UPG. FPD upgrade on that PLX will then time out.
Conditions:It is not known yet how the PLX EEPROM version becomes 0.0
Workaround:none
More Info:
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: * | 5.2.4.BASE, 5.2.5.BASE |
|
Known Fixed Releases: | 5.2.5.13i.BASE, 6.0.0.9i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw81646 | Title: | Plane stuck in MCAST_DOWN after SFE PON reset |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
Multiple PON RESET causes FC to reload
2/RP1/ADMIN0:Oct 12 06:49:35.194 : sfe_driver[2489]: %PLATFORM-CIH-5-ASIC_ERROR_PON_RESET_START : sfe[8]: PON_RESET needed 0x2002602e
2/RP1/ADMIN0:Oct 12 06:49:38.863 : sfe_driver[2489]: %PLATFORM-CIH-5-ASIC_ERROR_PON_RESET_START : sfe[19]: PON_RESET needed 0x2002602e
Conditions:
N/A
Workaround:
N/A
Further Problem Description:
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.4.FWDG |
|
Known Fixed Releases: * | 5.2.5.36i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu11566 | Title: | BLB IT- RP1 reload causing Packet loss in fabric causes BLB flap |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
BLB sessions will be flapped , on back to back RP Reloads .
Conditions:
On the Second RP reload , the BLB sessions will be flapped .
Workaround:
The BLB sessions comes up eventually.
Further Problem Description:
The BLB sessions comes up eventually.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.14i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux45263 | Title: | NPU_3 to FIA_3 c2c links down on LC1 after fabric planes shut/no shut |
|
Status: | Other |
|
Severity: | 2 Severe |
Description: | Symptom:
NPU_3 to FIA_3 c2c links down on LC1 after fabric planes shut/no shut, causing H0/1/0/7 stuck down/down
Conditions:
NPU_3 to FIA_3 c2c links down on LC1 after fabric planes shut/no shut, causing H0/1/0/7 stuck down/down
Workaround:
none
Further Problem Description:
NPU_3 to FIA_3 c2c links down on LC1 after fabric planes shut/no shut, causing H0/1/0/7 stuck down/down
|
|
Last Modified: | 08-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw78728 | Title: | bgp crashed at bgp_comm_delete_attr_elem_list during bgp scale testing |
|
Status: | Fixed |
|
Severity: | 2 Severe |
Description: | Symptom:
BGP crashes
Conditions:
routes are being updated at the same time as an init-sync is occurring. An init-sync occurs when the standby RP initializes and BGP is sending it all the current routes and other information to sync it up for NSR.
Workaround:
none.
Further Problem Description:
|
|
Last Modified: | 08-DEC-2015 |
|
Known Affected Releases: | 5.2.4.ROUT |
|
Known Fixed Releases: * | 5.3.3.22i.ROUT, 6.1.0.9i.ROUT |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux64030 | Title: | NCS6K: ship_server process crash @ confd_do_connect on standby RP reload |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
NCS6K: ship_server process crash @ confd_do_connect on standby RP reload
Conditions:
NCS6K: ship_server process crash @ confd_do_connect on standby RP reload
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 22-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux09382 | Title: | Operating LC is in "DOWN" Admin State in XR |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: | Symptom:
operating LC in down admin state
Conditions:
not 100% reproducible. no specific trigger,
Workaround:
restart shelf_mgr running RM active. The restart is not functional impacting
Further Problem Description:
|
|
Last Modified: | 04-DEC-2015 |
|
Known Affected Releases: | 5.2.1.CE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux42881 | Title: | error message with some admin show tech |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: | Symptom:
unexpected message on console
Conditions:
admin show tech ccc or install
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 05-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCuv76051 | Title: | compatibility_check.py - incompatible ch in Cisco-IOS-XR-ip-static-cfg.y |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Incompatible changes in Cisco-IOS-XR-ip-static-cfg.yang
Conditions:
The yang model Cisco-IOS-XR-ip-static-cfg.yang is not backward compatible acording to rfc6020.
Workaround:
Not neccessary
|
|
Last Modified: | 08-DEC-2015 |
|
Known Affected Releases: | 6.0.0.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCum74537 | Title: | show interfaces takes long time to display the output |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
show interfaces command takes long time (10+ sec) before any output is displayed.
Conditions:
NCS 6008 running 5.0.1 FCS images & executing show interfaces command.
Workaround:
Issue "show interface" commands for a specific interface
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: * | 5.2.1.27i.BASE, 5.2.2.16i.BASE, 5.2.3.1i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw55819 | Title: | default BGP-known policer rate too low by default on NCS6k |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
On NCS6k, the default bgp-known lpts rate is too low for bgp scale config and can result in lpts drops for bgp peers.
Conditions:
Workaround:
configure higher policer rate like on CRS :
lpts pifib hardware police flow bgp known rate 25000
Further Problem Description:
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: * | 5.2.4.BASE, 5.2.4.FWDG, 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux14157 | Title: | Calvados ISSU upgrade times-out |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: | Symptom:
Calvados ISSU times-out
Conditions:
one of the nodes is reset disabled in Calvados
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 03-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux63965 | Title: | NCS6K: Calvados show inventory loc <FC card> does not show optics |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
Calvados show inventory loc does not show optics
Conditions:
Always from the boot
Workaround:
nonw
Further Problem Description:
|
|
Last Modified: | 22-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux55058 | Title: | Tx/Rx Channels Disabled on CXP after CXP OIR. |
|
Status: | Other |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Tx/Rx Channels Disabled on CXP after CXP OIR.
Conditions:
CXP OIR
Workaround:
Restart ccc_driver process
Further Problem Description:
|
|
Last Modified: | 22-DEC-2015 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCui77524 | Title: * | npu driver crashes during DPE mbe memory scrubbing |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
npu driver on a LC resets after the LC comes up.
Conditions:
LC is reloaded
Workaround:
Further Problem Description:
Recovery: Since this issue is not 100% reproducible, you can recover by reloading the lc again or reloading the chassis.
hw-module location lc reload
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: | 5.0.1.3i.BASE, 5.0.1.6i.BASE, 5.2.1.1i.BASE, 5.2.2.6i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCui51442 | Title: | Do dpe_init in parallel across slices |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
Boot time may be long due to waiting all PITA initial completed.
Conditions:
N/A
Workaround:
N/A
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.2.1.BASE, 5.2.1.LC |
|
Known Fixed Releases: * | 5.1.3.99i.BASE, 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuo05049 | Title: | ARP fails to resolve after asic hard reset |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
ARP fails to resolve over L2VPN pws for any encap type.
Conditions:
If asic instance supporting l2transport subinterfaces undergoes hard reset, once the asic recovers succesfully, none of the interface resolve arp .
Workaround:
No workaround
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.2.1.LC |
|
Known Fixed Releases: | 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCum76874 | Title: | Incorrect value compared to alarm threshold for Rx/Tx power |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
For a multi-lane CPAK (e.g. LR4), the total Rx/Tx power level is compared to the alarm and warning thresholds rather than the power level of each lane, inaccurately showing high power levels.
Similarly, low level on a single lane may be missed.
Conditions:
Issue the "show controllers <100ge-interface> phy" command.
Workaround:
There is no workaround.
Further Problem Description:
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.1.BASE |
|
Known Fixed Releases: * | 5.1.3.99i.BASE, 5.2.1.21i.BASE, 5.2.2.8i.BASE, 5.3.0.1i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux33026 | Title: | localtime call causes sla_exec Coredump |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
sla_exec abnormally terminates when attempting to display Ethernet SLA operations.
Conditions:
This bug only impacts the NCS6k platform when running Ethernet SLA operations.
Workaround:
It may be possible to retrieve the SLA information using the MIB (where applicable). On-demand operations can be started using the "async" option to prevent the abnormal termination when displaying the results.
Further Problem Description:
The process abnormally terminates due to incorrect assumptions about the size of time structures which causes a time decoding API to fail unexpectedly.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.1.BASE |
|
Known Fixed Releases: | 5.2.5.36i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw80414 | Title: | commit fail with duplex full in mgmt interface, it still saved in sysdb |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
commit failed, but the configuration is still being committed into sysdb. Likewise for unconfiguration
Conditions:
in NCS6K, go to configuration mode, configure "duplex full" or "no duplex full", when user commit it, it failed, however, the configuration still takes it.
Workaround:
N/A
Further Problem Description:
DUPLEX mode configuration on management interface of NCS6K platform not supported.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.4.BASE |
|
Known Fixed Releases: * | 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv84716 | Title: | %INFRA-Process_Manager-3-PROCESS_RESTART: Liveness failure for craft_mgr |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Issue summary
----------------
version :5.2.1
Craft_mgr restarted due to heartbeat miss.
Tue Aug 4 04:00:07.777 GMT
0/RP1/ADMIN0:Aug 3 16:10:00.695 GMT: pm[1818]: %INFRA-Process_Manager-6-PROCESS_LIVENESS_FAILED : Liveness failure for craft_mgr (IID: 0), missed heartbeat messages
0/RP1/ADMIN0:Aug 3 16:10:00.904 GMT: cal_logger[19594]: %OS-SYSLOG-6-LOG_INFO : Dumping core /misc/scratch/core/craft_mgr_2346.by.6.20150803-161000.sysadmin-vm:0_RP1.02e9d.core.gz
0/RP1/ADMIN0:Aug 3 16:10:01.091 GMT: pm[1818]: %INFRA-Process_Manager-3-PROCESS_RESTART : Process craft_mgr (IID: 0) restarted
0/RP1/ADMIN0:Aug 3 16:10:01.412 GMT: dumper[1868]: Copied core file /misc/scratch/core/craft_mgr_2346.by.6.20150803-161000.sysadmin-vm:0_RP1.02e9d.core.gz to 0/RP1:/misc/disk1.
0/RP1/ADMIN0:Aug 3 16:10:01.482 GMT: dumper[1868]: Deleted core file /misc/scratch/core/craft_mgr_2346.by.6.20150803-161000.sysadmin-vm:0_RP1.02e9d.core.gz.
0/RP1/ADMIN0:Aug 3 16:10:10.490 GMT: shelf_mgr[1880]: %INFRA-SHELF_MGR-6-HW_EVENT : Rcvd HW event HW_EVENT_OK, event_reason_str 'HW Operational' for card 0/CI0
Symptom:
craft_mgr process restarted by pm.
Conditions:
When the liveness timer of craft_mgr to pm expires due to waiting on system calls.
Workaround:
None
Further Problem Description:
The craft_mgr process restarts with no further impact.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.1.BASE |
|
Known Fixed Releases: * | 5.2.5.33i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux25375 | Title: | 525 NCS6K ISSU: More than 1M labels allocated: mpls_lsd traceback |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Following ERR log is seen on primary active during issu load phase:
RP/0/RP0/CPU0:Nov 12 00:53:23.871 EST: mpls_lsd[126]: %ROUTING-MPLS_LSD-6-ERR_LBL_OOR : More than 1M labels allocated : mpls_lsd : (PID=4342) : -Traceback= 4a65b5 4a686a 45a610 7fd0a2a5e2ad 7fd0a2a7a9b7 7fd0a2a861ee 7fd0a2f092e4 7fd0a2f0effe 4138df 7fd09ce53d3e
Conditions:
Just trigger NG-ISSU load phase
Workaround:
This error is a false alarm and does not have any functional impact. No workaround is needed. Just ignore it.
Further Problem Description:
|
|
Last Modified: | 18-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | 5.2.5.36i.FWDG, 6.1.0.10i.FWDG |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux65753 | Title: | NCS6K:Initialization of the traffic mgr failed after slice shut/noshut |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
NCS6K:Initialization of the traffic mgr failed after slice shut/noshut
Conditions:
On slice shut/no shut
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw92590 | Title: | NCS6K: No LED status for F0/SW1 after F0/SC1 OIR |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
NCS6K: No LED status for F0/SW1 after F0/SC1 OIR
Conditions:
after F0/SC1 OIR
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: * | 5.2.5.36i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux65765 | Title: | NCS6K:slice_manager crashes on few LCs while XR show tech bundl executed |
|
Status: | Open |
|
Severity: | 3 Moderate |
Description: | Symptom:
NCS6K:slice_manager crashes on few LCs while XR show tech bundl executed
Conditions:
on XR show tech bundle execution
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux50751 | Title: | HSRP Invalid node id and failed to extract messages on console |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | Symptom:
After XR ISSU of smu activation, below HSRP failure messages are seen on the XR console.
RP/0/RP1/CPU0:Nov 7 19:38:25.681 : hsrp[1090]: nodeid_to_dprsi: Invalid nodeid 0xffffffff, failed to extract fields. 'Subsystem(0)' detected the 'fatal' condition 'Code
(0)'
RP/0/RP1/CPU0:Nov 7 19:38:40.684 : hsrp[1090]: nodeid_to_dprsi: Invalid nodeid 0xffffffff, failed to extract fields. 'Subsystem(0)' detected the 'fatal' condition 'Code
(0)'
RP/0/RP1/CPU0:Nov 7 19:38:55.686 : hsrp[1090]: nodeid_to_dprsi: Invalid nodeid 0xffffffff, failed to extract fields. 'Subsystem(0)' detected the 'fatal' condition 'Code
(0)'
Conditions:
XR ISSU of SMU activation
Workaround:
No workaround available
Further Problem Description:
None
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuh90082 | Title: | [panini] show tech bundle takes too long |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: * | This is a performance issue
Symptom:
It takes more than 12 mins to run show tech bundle (vs 8 mins on CRS)
Conditions:
Always
Workaround:
N/A
Further Problem Description:
RP/0/RP0/CPU0:ng-rp-auto-1-r1#show version
Wed Jul 3 13:57:16.213 EST
Cisco IOS XR Software, Version 5.0.0.32J
Copyright (c) 2013 by Cisco Systems, Inc.
Build Information:
Built By : palwal
Built On : Sat Jun 22 20:23:42 PDT 2013
Build Host : iox-bld4
Workspace : /auto/iox-bld4-scratch2/produc Version : 5.0.0.32J
Location : /opt/cisco/XR/packages/
ng-rp-auto-1-r1 uptime is 2 hours, 53 minutes
Package information:
Package active on node default-sdr:
iosxr-cai.rp-5.0.0.32J
iosxr-cai.rp_lc-5.0.0.32J
iosxr-common-pd-fib.rp-5.0.0.32J
iosxr-common-pd-fib.rp_lc-5.0.0.32J
iosxr-fwding.rp-5.0.0.32J
iosxr-fwding.rp_lc-5.0.0.32J
iosxr-infra.rp-5.0.0.32J
iosxr-infra.rp_lc-5.0.0.32J
iosxr-os.rp-5.0.0.32J
iosxr-os.rp_lc-5.0.0.32J
iosxr-routing.rp-5.0.0.32J
iosxr-routing.rp_lc-5.0.0.32J
iosxr-sse.rp-5.0.0.32J
iosxr-sse.rp_lc-5.0.0.32J
panini-base.rp-5.0.0.32J
panini-base.rp_lc-5.0.0.32J
panini-fwding.rp-5.0.0.32J
panini-fwding.rp_lc-5.0.0.32J
panini-os-support.rp-5.0.0.32J
panini-os-support.rp_lc-5.0.0.32J
Name: panini-mgbl
Version: 5.0.0.32J
Build User:palwal
Build Host:iox-bld4
Location : /opt/cisco/XR/packages/
RPM :
iosxr-mgbl.rp-5.0.0.32J
iosxr-mgbl.rp_lc-5.0.0.32J
panini-mgbl.rp_lc-5.0.0.32J
panini-mgbl.rp-5.0.0.32J
Name: panini-mpls
Version: 5.0.0.32J
Build User:palwal
Build Host:iox-bld4
Location : /opt/cisco/XR/packages/
RPM :
iosxr-mpls.rp-5.0.0.32J
iosxr-mpls.rp_lc-5.0.0.32J
Name: panini-doc
Version: 5.0.0.32J
Build User:palwal
Build Host:iox-bld4
Location : /opt/cisco/XR/packages/
RPM :
panini-doc.rp_lc-5.0.0.32J
panini-doc.rp-5.0.0.32J
Name: panini-k9sec
Version: 5.0.0.32J
Build User:palwal
Build Host:iox-bld4
Location : /opt/cisco/XR/packages/
RPM :
iosxr-security.rp_lc-5.0.0.32J
iosxr-security.rp-5.0.0.32J
Name: panini-mcast
Version: 5.0.0.32J
Build User:palwal
Build Host:iox-bld4
Location : /opt/cisco/XR/packages/
RPM :
panini-mcast.rp_lc-5.0.0.32J
iosxr-mcast.rp_lc-5.0.0.32J
panini-mcast.rp-5.0.0.32J
iosxr-mcast.rp-5.0.0.32J
Name: panini-5.0.0.32J.CSCuf47706
Version: 1.0.0
Build User:anegupta
Build Host:sjc-lds-589
Location : /opt/cisco/XR/packages/
RPM :
iosxr-infra-5.0.0.32J.CSCuf47706.rp-1.0.0
iosxr-infra-5.0.0.32J.CSCuf47706.rp_lc-1.0.0
Name: panini-5.0.0.32J.CSCuh61815-0.0.3.i
Version: 1.0.0
Build User:jwu
Build Host:iox-bld12
Location : /opt/cisco/XR/packages/
RPM :
iosxr-infra-5.0.0.32J.CSCuh61815.rp-1.0.0
iosxr-infra-5.0.0.32J.CSCuh61815.rp_lc-1.0.0
Name: panini-5.0.0.32J.CSCuh58077-0.0.2.i
Version: 1.0.0
Build User:jwu
Build Host:build-lnx-021
Location : /opt/cisco/XR/packages/
RPM :
iosxr-os-5.0.0.32J.CSCuh58077.rp-1.0.0
iosxr-os-5.0.0.32J.CSCuh58077.rp_lc-1.0.0
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.0.BASE |
|
Known Fixed Releases: | 5.0.1.10i.BASE, 5.2.1.1i.BASE, 5.2.2.6i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux28054 | Title: | Debug Messages Printed for EOAM Packets (LBR, SLR and DMR) |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Response packets to cfm-synthetic-loss-measurement, cfm-delay-measurement, cfm-loopback will print cosmetic debug messages to the console.
Conditions:
when cfm-synthetic-loss-measurement, cfm-delay-measurement, cfm-loopback are triggered from the pee,cosmetic debug messages will be printed in the console.
Workaround:
No functionality impact.
Further Problem Description:
Response packets to cfm-synthetic-loss-measurement, cfm-delay-measurement, cfm-loopback will print cosmetic debug messages to the console. This occurs for all LBR,SLR,DMR packets and there is no workaround.
|
|
Last Modified: | 11-DEC-2015 |
|
Known Affected Releases: | 5.2.1.BASE |
|
Known Fixed Releases: * | 5.2.5.36i.BASE, 6.1.0.11i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux65734 | Title: | install log should report error when we install same ISSU smu twice |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
install log should report error when we install same ISSU smu twice
Conditions:
install log should report error when we install same ISSU smu twice
Workaround:
none
Further Problem Description:
install log should report error when we install same ISSU smu twice
|
|
Last Modified: | 23-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu07604 | Title: | 'show environment all' output not formatted with "terminal width" in XR |
|
Status: | Fixed |
|
Severity: | 4 Minor |
Description: | Symptom:
'show environment all' on sysadmin output is not formatted correctly.
Conditions:
When terminal width is set to 0 or more than 372 in IOS-XR VM.
Workaround:
none
Further Problem Description:
|
|
Last Modified: | 20-DEC-2015 |
|
Known Affected Releases: | 5.2.3.BASE |
|
Known Fixed Releases: * | 6.0.0.29i.BASE |
|
|
| |
| |
|
Alert Type: | New |
Bug Id: | CSCux45745 | Title: | show tech enhancement to collect time-bound core instead of old cores. |
|
Status: | Open |
|
Severity: | 4 Minor |
Description: | Symptom:
Old core files are getting collected as part of show tech
Conditions:
while collecting show tech issu.
Workaround:
Further Problem Description:
|
|
Last Modified: | 08-DEC-2015 |
|
Known Affected Releases: | 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux33666 | Title: | ISSU abort reason during prepare is not available in summary / logs |
|
Status: * | Other |
|
Severity: * | 6 Enhancement |
Description: | Symptom:
Abort reason is not displaying properly in issu summary in case of abort during prepare phase.
Conditions:
in case of missing any mandatory smu's
Workaround:
Further Problem Description:
|
|
Last Modified: | 21-DEC-2015 |
|
Known Affected Releases: | 5.2.5.ADMIN, 5.2.5.BASE |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCts67004 | Title: | Modify SSE parser to support TM infra |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: * | Not visible to customer.
|
|
Last Modified: | 17-DEC-2015 |
|
Known Affected Releases: | 5.0.0.BASE |
|
Known Fixed Releases: | 5.1.0.2i.BASE |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCux49518 | Title: | "sh mpls for pref <prefix>" does not count packets with Implicit Null |
|
Status: | Open |
|
Severity: | 6 Enhancement |
Description: * | Symptom:
"sh mpls for pref " does not count packets with Implicit Null on Panini Platform
Conditions:
RP/0/RP0/CPU0:rvc5-r-001#sh mpls for pref 1.0.1.245/32
Topology: rvc5-r-001 (TenGigE0/1/0/8.560) ----------------- Tail end router (lo0 = 1.0.1.245)
One hop TE tunnel exists between the router
Thu Dec 10 16:08:15.762 EST
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
24142 Pop 1.0.1.245/32 tt560 1.0.1.245 0 >>>>>>>>>>> Bytes switched shows 0
RP/0/RP0/CPU0:rvc5-r-001#sh mpls for tunnels 560 detail
Thu Dec 10 16:17:03.695 EST
Tunnel Outgoing Outgoing Next Hop Bytes
Name Label Interface Switched
-------- ----------- ------------ --------------- ------------
tt560 1560 Te0/1/0/8.560 2.0.1.245 3023634079094 >>>>>>>>>>> When we check the tunnel forwarding stats, it displays the logs
Updated Dec 10 09:56:22.876
Version: 1184225, Priority: 2
MAC/Encaps: 18/22, MTU: 9140
Label Stack (Top -> Bottom): { 1560 }
Local Label: 36614
NHID: 0
Packets Switched: 12192077535
Workaround:
Further Problem Description:
"sh mpls for pref " does not count packets with Implicit Null on Panini Platform
=========================================================================================
Platform: NCS6k
Software: 5.2.4
RP/0/RP0/CPU0:rvc5-r-001#sh mpls for pref 1.0.1.245/32
Topology: rvc5-r-001 (TenGigE0/1/0/8.560) ----------------- Tail end router (lo0 = 1.0.1.245)
One hop TE tunnel exists between the router
Thu Dec 10 16:08:15.762 EST
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
24142 Pop 1.0.1.245/32 tt560 1.0.1.245 0 >>>>>>>>>>> Bytes switched shows 0
RP/0/RP0/CPU0:rvc5-r-001#sh mpls for tunnels 560 detail
Thu Dec 10 16:17:03.695 EST
Tunnel Outgoing Outgoing Next Hop Bytes
Name Label Interface Switched
-------- ----------- ------------ --------------- ------------
tt560 1560 Te0/1/0/8.560 2.0.1.245 3023634079094 >>>>>>>>>>> When we check the tunnel forwarding stats, it displays the logs
Updated Dec 10 09:56:22.876
Version: 1184225, Priority: 2
MAC/Encaps: 18/22, MTU: 9140
Label Stack (Top -> Bottom): { 1560 }
Local Label: 36614
NHID: 0
Packets Switched: 12192077535
RP/0/RP0/CPU0:rvc5-r-001#sh mpls for labels 24142 hardware ingress detail location 0/0/cpu0
Thu Dec 10 16:03:00.474 EST
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
24142 Pop 1.0.1.245/32 tt560 1.0.1.245 N/A
Updated Dec 10 09:57:39.961
Version: 1185543, Priority: 1
MAC/Encaps: 4/8, MTU: 1500
Label Stack (Top -> Bottom): { 1560 Imp-Null } >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>&g
|
|
Last Modified: | 22-DEC-2015 |
|
Known Affected Releases: | 5.2.4.FWDG |
|
Known Fixed Releases: | |
|
|
| |
:
2015 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论