Software Updates for ME 3600X Series Ethernet Access Switches
Alert Type: | New Release | Product Name: | ME 3600X-24FS-M Switch | Software Type: | IOS Software | Release Version: | 15.4.3S4 | Release Date: | 02-OCT-2015 |
Software Updates for ME 3600X Series Ethernet Access Switches
| | | | | Suggested  : | | Previously Suggested: | |
|
Software Updates for ME 3600X Series Ethernet Access Switches
Alert Type: | New Release | Product Name: | ME 3600X-24TS-M Switch | Software Type: | IOS Software | Release Version: | 15.4.3S4 | Release Date: | 02-OCT-2015 |
Software Updates for ME 3600X Series Ethernet Access Switches
| | | | | Suggested : | | Previously Suggested: | |
|
Software Updates for ME 3600X Series Ethernet Access Switches
Alert Type: | New Release | Product Name: | ME 3600X-24CX-M Switch | Software Type: | IOS Software | Release Version: | 15.4.3S4 | Release Date: | 02-OCT-2015 |
Software Updates for ME 3600X Series Ethernet Access Switches
| | | | | Suggested : | | Previously Suggested: | |
|
Known Bugs - ME 3600X Series Ethernet Access Switches
| | |
Alert Type: | New | Bug Id: | CSCuw41259 | Title: | ME3600 forwarding breaks when MPLS and IP ECMP exist | |
Status: | Open | |
Severity: | 2 Severe | Description: | Symptom:
Forwarding will break for the traffic that is reachable via an MPLS path and an IP path.
Conditions:
Running an ME-3600 and having two paths to the destination. One path is MPLS, while the other path is IP only.
Workaround:
Enable MPLS on the other path, or shut down one of the paths.
Further Problem Description:
| |
Last Modified: | 26-OCT-2015 | |
Known Affected Releases: | 15.5(1)S | |
Known Fixed Releases: | | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuq31416 | Title: | IPv4 and IPv6 unicast routing enabled by default | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
After reload, the "IPv4 and IPv6 routing" enabled in the config even though it has been disabled before reload.
Conditions:
reload
Workaround:
N/A
Further Problem Description:
| |
Last Modified: | 05-OCT-2015 | |
Known Affected Releases: | 15.2(3.1.92)E, 15.4(2)S | |
Known Fixed Releases: * | 15.2(3)E, 15.2(4.0)ST, 15.2(4.0.64a)E, 15.2(5.0)ST, 15.4(2)S2, 15.4(3)S0.6, 15.4(3)S1, 15.4(3)S2, 15.4(3)SN1a, 15.5(0.18)S0.3 | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuo98907 | Title: | Platform build issue post rel1.0.2 | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom: Platform-specific images do not build.
Conditions: This symptom occurs when any platform-specific image is built.
Workaround: This issue is fixed.
| |
Last Modified: | 04-OCT-2015 | |
Known Affected Releases: | 15.4(3)S | |
Known Fixed Releases: * | 15.2(4.0)ST, 15.2(4.0.64a)E, 15.2(5.0)ST, 15.4(2.17)S0.5, 15.4(3)S, 15.4(3)SN1, 15.5(0.11)S, 15.6(0.17)PI30e, 15.6(0.19)T | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv34896 | Title: | VPLS autodiscovery PW failed to comeup when BGP recovers from failure | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
A Virtual Private LAN Service (VPLS) Virtual Circuit (VC) which is created
using BGP Autodiscovery goes down and stays down when it is reprovisioned
due to a BGP route change. The output of show l2vpn vfi
or show vfi shows that the pseudowire was not created.
Conditions:
This symptom has been observed when multiple BGP NLRI messages are received
from the same BGP peer with the same route information. All IOS/IOS-XE
versions and platforms are affected.
Workaround:
Perform the exec command clear ip bgp.
Further Problem Description:
| |
Last Modified: | 22-OCT-2015 | |
Known Affected Releases: | 15.4(3)S2.1 | |
Known Fixed Releases: * | 15.4(3)S3.8, 15.4(3)S4, 15.5(1)S2.15, 15.5(1)S2.9, 15.5(2)S1.5, 15.5(2)S2, 15.5(3)S0.2, 15.5(3)SN, 15.6(0.11)S, 15.6(0.17)PI30d | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCug37434 | Title: | Archive download fails with sector and I/O error | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: * | Symptom:
Sector and I/O errors are observed while archive download.
Conditions:
Need to do archive download of tar image.
Workaround:
Reload the console and do archive download again.
More Info:
| |
Last Modified: | 26-OCT-2015 | |
Known Affected Releases: | 15.3(2)S | |
Known Fixed Releases: | 12.2(50)SE1, 12.2(50)SE2, 12.2(50)SE3, 12.2(50)SE4, 12.2(50)SE5, 12.2(50)SG4, 12.2(50)SG6, 12.2(50)SQ, 12.2(50)SQ5, 12.2(50)SQ6 | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuu65568 | Title: | Controller E1 showing 256 Line Err Secs | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:E1 controller constantly shows 256 Line Err Secs errors for the summarized 15 minutes interval. This counter is displayed as part of command show controllers e1.
The current data interval for this command output is not affected. It will display the correct value of experienced errors in the current period.
me3600xb#sh controllers e1 0/1
E1 0/1 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Framing is crc4, Line Code is HDB3, Clock Source is Internal.
International Bit: 1, National Bits: 11111
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 256 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 1 15 minute intervals):
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 256 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs .
Conditions:Occurs when E1 controllers are active.
Workaround:There is no workaround.
| |
Last Modified: | 14-OCT-2015 | |
Known Affected Releases: | 15.4(1)S2 | |
Known Fixed Releases: * | 15.4(3)S3.4, 15.4(3)S4, 15.5(2.21)S0.12, 15.5(2.21)S0.9, 15.5(3)S, 15.5(3)S0a, 15.5(3)SN, 15.6(0.6)S | |
|
| |
|
2013 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论