| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu42736 | Title: | Workflow through Guided Setup taking user input on static values |
|
Status: * | Terminated |
|
Severity: * | 3 Moderate |
Description: | Symptom:
I have created a workflow through Guided Setup, where I am using SSH task with static user input. But when I run it, its again ask me for the same input parameters.
Conditions:
I have created a workflow through Guided Setup, where I am using SSH task with static user input. But when I run it, its again ask me for the same input parameters
Workaround:
Further Problem Description:
I have created a workflow through Guided Setup, where I am using SSH task with static user input. But when I run it, its again ask me for the same input parameters
|
|
Last Modified: | 15-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0) |
|
Known Fixed Releases: | |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu79961 | Title: | VPLEX Create Distributed Device issue |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Synchronization between the 2 local disks when the distributed device is created. So at each time that 2 new disks are created, the VPLEX try to replicate the blank data of the first disk on the second disk.
Conditions:
Create distributed device
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0) |
|
Known Fixed Releases: * | 5.3(1.0), 5.3(2.0), 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw34987 | Title: | vDC LOV data is not getting populated when triggered using API |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
vDC LOV data is not getting populated when triggered using API
Conditions:
Access UCSD data using API
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw59544 | Title: | Disable/Remove - Cleanup Persistence Managers Task |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
GUI becomes slow and unreachable after sometime
Conditions:
None
Workaround:
Restart the appliance and disable Cleanup Persistence Managers Task
Administration - System - System Tasks
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: * | 5.1, 5.2(0.0), 5.3(0.0), 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu17229 | Title: | Custom task mapping lost when both input/output variables names match |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
While creating Custom tasks - when the input variable mapping going off, when the input and output variable names match.
Conditions:
When the input and output variable names match.
Workaround:
Use different names for input and output variables
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.2(0.0), 5.3(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw45827 | Title: | UCSD 5.3.2.0 - Advanced Filter fails to find substrings |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Advanced Filter fails to find substrings but works fine if complete string is used for search,
Conditions:
Issue is noticed on UCSD 5.3.2.0 version
Workaround:
Use complete string for search instead of searching with substring
Ex: If the VM name is UCSD-test, search for complete string instead of sub-sting UCSD.
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu71599 | Title: | Generate CSR, create/import self-signed certificate, import CA cert |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Secured access to UCSD through HTTPS only (or HTTP redirection to HTTPS) is not 100% supported yet. It breaks file uploading features across the UCSD UI. Until this issue is fixed it's not a good idea to use HTTPS and import any CA certificate for use with HTTPS
Conditions:
None
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0), 5.4(0.0) |
|
Known Fixed Releases: * | 5.3(1.1), 5.3(2.0), 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuu88737 | Title: | Support for support SCVMM version 2012 R2 (3.2.8002.0) |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
UCSD is also unable to pull the reports for any networks
Conditions:
UCSD was added with SCVMM version 2012 R2 (3.2.8002.0) which is not supported
Workaround:
Downgrade the SCVMM to the supported version
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0) |
|
Known Fixed Releases: * | 5.3(1.0), 5.3(2.0), 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw15586 | Title: | NTP server time sync takes 30 mins to sync after the system reboot |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
NTP server time sync takes 30 mins to sync after the system reboot
Conditions:
===> NTP time sync is working fine, after the system reboot ,the time may change to default, it takes 30 mins to sync the NTP server Time
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw26894 | Title: | When provision VM from ISO, UCSD ignores "Deploy to Folder" setting |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
When you do a standard catalog request to provision a VM from a template in this vDC, it correctly sees the "Deploy to Folder" value in the Computing Policy and puts the new VM in the specified folder in vCenter. But when you do a standard catalog request to provision a VM from an ISO, it puts the resulting VM at the root of the vCenter DC rather than in the specified folder. I.e., when doing a standard provision from ISO, it appears to ignore the "Deploy to Folder" part of the Computing Policy.
Conditions:
You have a folder defined in vCenter, and you put the name of this folder in the "Deploy to Folder" field of your Computing Policy for a given vDC.
This issue has been found by customer, and re-created in TAC lab. In both cases, this was tested in UCSD 5.3.1.2 with vCenter 5.5.
Workaround:
No good workaround, since the standard "provision VM from ISO" catalog does not provide the post-provisioning workflow option (unlike the standard "provision VM from template" catalog). The only options I can see for the customer are:
1. manually move the VMs in vCenter, or
2. create a custom workflow to provision VM from ISO + move VM to folder
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(1.2), 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw28191 | Title: | Logo of Catalogue Item changes if next button clicked too fast |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Logo of Catalogue Item changes if next button clicked too fast
Conditions:
If an existing catalogue item is editied, it takes about 15-30 seconds to load all items of the page, including the cataloge-icon. If you click to quickly next without changing anything and go to the next page, then the Catalog is changed to the default-Icon, which is the IBM-Logo.
Workaround:
Wait for the page to fully load before clicking next.
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCus90552 | Title: | February 2015 - NTPd.org Vulnerabilities |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Cisco UCS Director includes a version of NTPd that is affected by the vulnerabilities identified by the Common Vulnerability and Exposures (CVE) IDs:
CVE-2014-9298
Please consult http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20141222-ntpd for further information.
Conditions:
Only affected if customers have enabled IPv6 on an interface.
Workaround:
None.
Further Problem Description:
PSIRT Evaluation:
The Cisco PSIRT has assigned this bug the following CVSS version 2 score. The Base and Temporal CVSS scores as of the time of evaluation are 5.0/4.8:
https://intellishield.cisco.com/security/alertmanager/cvssCalculator.do?dispatch=1&version=2&vector=AV:L/AC:L/Au:N/C:P/I:N/A:N/E:F/RL:U/RC:C
The Cisco PSIRT has assigned this score based on information obtained from multiple sources. This includes the CVSS score assigned by the third-party vendor when available. The CVSS score assigned may not reflect the actual impact on the Cisco Product.
Additional information on Cisco's security vulnerability policy can be found at the following URL:
http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.1(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw60911 | Title: | Number of UCS Central API sessions should be configurable |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Workflow takes 10 minutes to create a service profile from a service profile template in UCS Central.
Conditions:
Multiple workflows are run for in parallel.
Workaround:
1. Reduce the number service requests to create service profile in parallel.
2. Increase UCS Central Inventory Collector task frequency from 15 minutes to 1 hour.
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0), 5.4(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCut04205 | Title: | SETUP_PXE_BOOT fails PXE Boot.IP Address pool exhausted |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
PXE boot request failure with the message IP Address pool exhausted.
Conditions:
The IP address specified may be used in another PXE request. Or the IP address may be already assigned and it is pingable.
Workaround:
Make sure that the any failed PXE requests are rolled back so that the IP address used for the request is released from the used IP pool. If it still fails, make sure that the IP address is not already assigned and pingable.
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.2(0.0) |
|
Known Fixed Releases: * | 5.2(0.3), 5.3(1.0), 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv38292 | Title: | HyperV performance data collector task taking longer time than expected |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Performance data collector task is taking more than 25 min to complete. The default execution time is 15 mins which is not editable.
Conditions:
None
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(1.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw59631 | Title: | LOGOUT button should be available when appliance header is hidden |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Logout buttong for the appliance is not available when the header is hidden
Conditions:
Hiding the appliance heading in User Interface settings
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw45019 | Title: | Registration of UNDO task fails for Open Automation task |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
After upgrade to 5.3.2.0, registration of UNDO task fails for Open Automation task
Conditions:
Upgrading to 5.3.2.0
Workaround:
context.getChangeTracker().undoableResourceAdded("Zone", Long.toString(zone.getId()), "Add Zone to Inventory", "Add Zone to Inventory task", new DeleteZoneFromInventoryTask().getTaskName(), // This need to be your task handler name.new DeleteZoneFromInventoryConfig(z.getId()));
Check your rollback task handler name, for example
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv43901 | Title: | Cannot create VSAN from UCSD |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
Cannot create VSAN from UCSD
Conditions:
UCSD:5.3
UCSM:2.2(3d)
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw45888 | Title: | VMAX Masking Views show duplicate Initiator groups and devices |
|
Status: | Fixed |
|
Severity: | 3 Moderate |
Description: | Symptom:
when creating a Masking View via the 'Create VMAX Masking View' task, OR, maybe just the way Director is presenting it in the Converged view. In short, the task is adding multiple, some duplicate, entries for a host where I would only expect to see one entry
Conditions:
VMAX Masking Views show duplicate Initiator groups and devices, view is created by custom workflow
Workaround:
None
Further Problem Description:
None
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCur71383 | Title: | UCSD unable to handle special characters sync from LDAP users & Groups |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
UCSD 5.1 - Groups and Users with special charactes wont be synced from LDAP/AD server
Conditions:
Group and Users having special characters.
Workaround:
Modify the user and group names
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.1 |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv99902 | Title: | Enhancement request to upgrade httpclient from 4.1.3 to 4.2 |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Enhancement request to upgrade httpclient from 4.1.3 to 4.2
Conditions:
Workaround:
None
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(2.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuw12689 | Title: | "always execute during system initialization" not included in OrchGuide |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
"always execute during system initialization" not included in Orch Guide
Conditions:
n/a
Workaround:
n/a
Further Problem Description:
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(1.2) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
| |
|
Alert Type: | Updated * |
Bug Id: | CSCuv20540 | Title: | Need to qualify SCVMM 3.2.8 |
|
Status: | Fixed |
|
Severity: | 6 Enhancement |
Description: | Symptom:
Unsupported version of SCVMM - could run into issues in network/storage provisioning
Conditions:
Customer not able to use task library reliably
Workaround:
None
Further Problem Description:
Impacts usability and reliability
|
|
Last Modified: | 23-OCT-2015 |
|
Known Affected Releases: | 5.3(0.0) |
|
Known Fixed Releases: * | 5.4(0.0) |
|
|
| |
2013 Cisco and/or its affiliates. All rights reserved. 
没有评论:
发表评论