Cisco Notification Alert -Cisco Optical - Prime Optical-01-Nov-2015 17:49 GMT

Feedback Sign Up Unsubscribe         Security Advisories & Responses - Prime Optical Title: Multiple Vulnerabilities in OpenSSL (June 2015) Affecting Cisco Products Description: On June 11, 2015, the OpenSSL Project released a security advisory detailing six distinct vulnerabilities, and another fix that provides hardening protections against exploits as described in the Logjam research. Multiple Cisco products incorporate a version of the OpenSSL package affected by one or more vulnerabilities that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or corrupt portions of OpenSSL process memory. This advisory will be updated as additional information becomes available. Cisco will release software updates that address these vulnerabilities. Workarounds that mitigate these vulnerabilities may be available. This advisory is available at the following link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20150612-openssl Date: 16-OCT-2015 Find additional information in Cisco Security Advisories & Responses Known Bugs - Prime Optical Alert Type: Updated * Bug Id: CSCed42822 Title: SNMP relay IP and community string not getting updated in NE expl Status: Fixed Severity: 3 Moderate Description: * Symptom: In Network Explorer->Netowrk->SNMP tab, If we delete all Relay IP Address or Community Names , the updates for Relay B and Relay C are not propogated to CTM Conditions: When we delete Relay B and Relay C community Names or IP Addresses also. Workaround:None Resolution:Future releases Reproducibility(%):100% Last Modified: 22-OCT-2015 Known Affected Releases: * 4.6(0.498), 5.0 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCea13560 Title: For some Electrical path parametrs TCAs were not gen. by E1 card Status: Fixed Severity: 3 Moderate Description: * Symptom: CTC does not generate TCAs for electrical path EB-P thresholds on E1-42 cards. Conditions: For E1-42 cards, the EB-P thresholds are the same as CV-P thresholds. The NE generates a TCA against the CV-P threshold, but the mapping of EB-P to CV-P is not done. There is no known workaround. Last Modified: 11-OCT-2015 Known Affected Releases: * 4.0, 4.1, 4.6 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCea15501 Title: For the warnings coming on port-1 of STM1E card the E4 object is Status: Fixed Severity: 3 Moderate Description: * Symptom: For an STM1E-12 card, the Alarm Browser shows an E4 card instead of STM1E in the Affected Object field. Conditions: The Affected Object field shows an E4 card instead of STM1E for the following warning alarms or alarm conditions on ports 1 to 8 on an STM1E-12 card: - Loopback terminal - Loopback facility - BER thresholds - Alarms suppressed for maintenance Workaround: None. Last Modified: 11-OCT-2015 Known Affected Releases: 4.6, 5.0, 6.0 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCur54616 Title: * TACACS authentication fails if ICMP or RST SYN packets are blocked Status: Open Severity: * 3 Moderate Description: Symptom: CPO Client authentication through TACACS fails Conditions: TACACS authentication configured on CPO Workaround: None Further Problem Description: Last Modified: 28-OCT-2015 Known Affected Releases: 10.0(0.0.309), 10.0(2), 10.3(0.0.1), 9.8 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCec48260 Title: PM Buckets missed/show correct stats when time chng on NE Status: Fixed Severity: 3 Moderate Description: * Symptom: In rare cases, CTM does not collect performance monitoring data on an ONS 15327, ONS 15454 SONET, or ONS 15454 SDH NE for a period of time and begins collecting this data again. Conditions: When the NE time is changed on an ONS 15327, ONS 15454 SONET, or ONS 15454 SDH NE to a time in the past, CTM will not collect performance monitoring data for time periods that have already been collected under the previous NE time setting. This problem occurs whether or not robust PM collection is enabled. Workaround: None. Last Modified: 18-OCT-2015 Known Affected Releases: 4.6, 5.0 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCed12606 Title: Pwr: Battery Fail alarm shows as MN though alarm profile is MJ Status: Fixed Severity: 3 Moderate Description: * Symptom: Battery Failure alarm is reported as MN in CTM alarm browser even though the Alarm profile is set to MJ for this alarm Conditions:The issue typically occurs with the following steps Open alarm browser. Look for battery failure alarm Open Alarm Profile table & see PWR: BAT-Fail alarm is set for MJ Workaround:None Last Modified: 20-OCT-2015 Known Affected Releases: * 4.6(0.433), 5.0 Known Fixed Releases: Alert Type: Updated * Bug Id: CSCud79214 Title: No message shown when attempting to access CPO with wrong credentials Status: Open Severity: 4 Minor Description: Symptom: No warniing message is shown when user attempts to login into Prime Optical with wrong credential. Conditions: User attemps to login to Prime Optical portal with wrong user or password. Workaround: none Last Modified: 08-OCT-2015 Known Affected Releases: * 10.0(0.0.1), 10.0(2.0.1), 10.3(0.0.1), 10.5(0), 9.6(0.128), 9.6(3.1), 9.8(0.0.1) Known Fixed Releases: Alert Type: Updated * Bug Id: CSCeb71477 Title: Physical location field was not showing port name in alarm:some c Status: Fixed Severity: 4 Minor Description: * Symptom: For Carrier Loss on LAN Alarm on ML1000 and ML100T-2 cards the Port Names are not seen on CTM. Condition: Port Names should be set on the Ports of the ML1000 and ML100T-2 cards. Workaround: None Expected Resolution: Next CTM release Last Modified: 15-OCT-2015 Known Affected Releases: 4.1(0.450), 4.6, 5.0 Known Fixed Releases: Find additional information in Bug Search index.   2013 Cisco and/or its affiliates. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks