Known Bugs - Data Center Network Manager
| | |
Alert Type: | Updated * | Bug Id: | CSCuv49725 | Title: | Fabric view does not show N9k | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
Fabric view does not show N9k.
Appropriate selection of Leaf, Spine, Border Leaf does need to be present (override)
Appropriate POD selection does need to be present (override)
Conditions:
new install with default values
Workaround:
none
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1), 7.1(2), 7.2(1) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.63)S0, 7.2(1.69)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73), 7.3(0)PDB(0.102) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuu06719 | Title: | Profile re-apply between universal and individual profiles does not work | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
Profile re-apply between universal and individual profiles does not work
Conditions:
when a profile refresh is triggered from DCNM between universal and individual profiles it messes up the auto-config on the switch. Vlan and SVI get removed and profile goes into wait state.
After this even if you use clear fabric database, upon the next auto-config trigger with universal profile the vlan goes into err-disabled state on the MCT
Workaround:
only way to fix this is switch reload
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(0)N1(0.174) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(0.38)S0, 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3), 7.3(0)HM(0.5), 7.3(0)IB(0.67), 7.3(0)MMD(0.9), 7.3(0)OTT(0.30) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCus59551 | Title: | Template cannot be imported if properties is defined | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
Config template feature in web client does not allow to edit or save while importing a template
Conditions:
When a template has the attribute "published" is set to true, and imported edit/save options are not available.
Workaround:
Open the template in a text editor and the value for the attribute "published" to false.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1)S19 | |
Known Fixed Releases: * | 6.2(11.4)S0, 6.2(13)FM(0.33), 6.2(13)GS(0.13), 7.0(0)BZ(0.98), 7.1(1.25)S0, 7.1(1.36)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuy54479 | Title: | Evaluation of dcnm-server for OpenSSL March 2016 | |
Status: | Fixed | |
Severity: | 2 Severe | Description: * | Symptom:
Cisco Data Center Network Manager includes a version of OpenSSL that is affected by the vulnerability identified by one or more of the following Common Vulnerability and Exposures (CVE) IDs:
CVE-2016-0800 CVE-2016-0705 CVE-2016-0798 CVE-2016-0797 CVE-2016-0799 CVE-2016-0702 CVE-2016-0703 CVE-2016-0704
And disclosed in https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20160302-openssl
This bug has been opened to address the potential impact on this product.
Conditions:
Exposure is not configuration dependent.
Cisco has reviewed and concluded that this product is affected by the following Common Vulnerability and Exposures (CVE) IDs:
CVE-2016-0797 - BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
CVE-2016-0799 - Fix memory issues in BIO_*printf functions
CVE-2016-0705 - Double-free in DSA code
CVE-2016-0798 - Memory leak in SRP database lookups
CVE-2016-0702 - Side channel attack on modular exponentiation
This product is not affected by the following Common Vulnerability and Exposures (CVE) IDs:
CVE-2016-0800 - Cross-protocol attack on TLS using SSLv2 (DROWN)
CVE-2016-0703 - Divide-and-conquer session key recovery in SSLv2
CVE-2016-0704 - Bleichenbacher oracle in SSLv2
Workaround:
Not available.
Further Problem Description:
Additional details about those vulnerabilities can be found at http://cve.mitre.org/cve/cve.html
PSIRT Evaluation:
The Cisco PSIRT has assigned this bug the following CVSS version 2 score. The Base CVSS score as of the time of evaluation is: 4.3
https://tools.cisco.com/security/center/cvssCalculator.x?version=2&vector=AV:N/AC:M/Au:N/C:P/I:N/A:N/E:ND/RL:ND/RC:ND
The Cisco PSIRT has assigned this score based on information obtained from multiple sources. This includes the CVSS score assigned by the third-party vendor when available. The CVSS score assigned may not reflect the actual impact on the Cisco Product.
Additional information on Cisco's security vulnerability policy can be found at the following URL:
http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html
| |
Last Modified: | 04-APR-2016 | |
Known Affected Releases: | 7.2(1), 7.2(2), 7.2(2a), 7.2(3) | |
Known Fixed Releases: | 7.3(0.293)S0 | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCus76975 | Title: | DCNM auto-config profile name containing _space_ causes switch to reload | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
Reload on device when a profile with a space in the name is applied to the device via auto configuration.
Conditions:
Profile created in DCNM for auto-config has a space in it.
Workaround:
Make sure that the profile name does not contain a space. Pre-packaged profiles do not have this issue, custom-generated profiles should adhere this naming convention.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1) | |
Known Fixed Releases: * | 6.2(13)FM(0.54), 6.2(13)GS(0.15), 6.2(13.1)S0, 7.0(0)BZ(0.98), 7.1(1.46)S0, 7.1(1.62)S0, 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv76463 | Title: | VRF-common-universal profile can be edited & deleted when instantiated | |
Status: | Fixed | |
Severity: | 2 Severe | Description: | Symptom:
Network Profile (eg. TF or EF) cannot be edited or deleted, when they are instantiated. That provides customer a important level of protection against human errors. The same must apply to all vrf-common-universal profile (including customized ones), but this is not the current behavior
Conditions:
DCNM 7.2(1)
Workaround:
None
Further Problem Description:
None
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(1)S8 | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.63)S0, 7.2(1.66)S0, 7.2(1.71)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCur96084 | Title: | N5K-56XX devices are not listed in config template | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
When the templates supported platform is N5600, no N56** device types are listed for config delivery
Conditions:
N56** device types are discovered and managed
Workaround:
Add N5500 to the templates supported platform and save the template. Now select the template and try creating a config delivery job in the web client, the N56** devices should be available for selection.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(0.46) | |
Known Fixed Releases: * | 6.2(11.4)S0, 6.2(13)FM(0.33), 6.2(13)GS(0.13), 7.0(0)BZ(0.98), 7.1(0.207)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCus40622 | Title: | DCNM:Template job fails when there is undefined symbol in response | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
Config template shows job status as failed
Conditions:
When a config template has the command 'copy r s' in it, the out put response contains the symbol '%'.
This is considered as failure response and the commands are rolled back if the rollback option is enabled.
Workaround:
To avoid marking the 'copy r s' response as failure, add the text "Copy complete" in a new line in the file /dcnm/data/templates/skip-error-patterns.txt.
And restart the DCNM Services.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1)S19, 7.1(1.113) | |
Known Fixed Releases: * | 6.2(11.4)S0, 6.2(13)FM(0.33), 6.2(13)GS(0.13), 7.0(0)BZ(0.98), 7.1(1.36)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCus44103 | Title: | DCNM: lanstartup.log and sanstartup.log are not rotating | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
The DCNM LAN Server service fails to start with the following error in "lanstartup.log" under "%INSTALL_DIR\dcm\jboss-as-7.2.0.Final\standalone\log":
---snip---
Starting Cisco DCNM LAN Server [2014-12-29 09:18:13]
Calling "e:\Program Files\Cisco Systems\dcm\jboss-as-7.2.0.Final\bin\standalone.conf.bat"
"JAVA_OPTS already set in environment; overriding default settings with values: -Xms256M -Xmx6152M -XX:MaxPermSize=512M -XX+HeapDumpOnOutOfMemoryError -XX:-UseGCOverheadLimit"
The handle could not be opened
during redirection of handle 1.
---snip---
A similar error is noticed for the SAN servers in the sanstartup.log file. The startup of the server fails.
Conditions:
1. The "lanstartup.log" file itself is >4 GB or the "sanstartup.log" is > 7GB
2. This issue has been observed, when DCNM Server is installed on a host/VM running Microsoft Windows Server OS.
Workaround:
1. Stop all DCNM Server services via "Start > All Programs > Cisco DCNM Server > Stop DCNM Servers".
2. Delete the "lanstartup.log" and "sanstartup.log" files under "%INSTALL_DIR\dcm\jboss-as-7.2.0.Final\standalone\log" (you can take a copy as backup beforehand, if needed).
alternatively you can delete or rename the "%INSTALL_DIR\dcm\jboss-as-7.2.0.Final\standalone\log" directory and recreate it.
3. Start all DCNM Server services via "Start > All Programs > Cisco DCNM Server > Start DCNM Servers".
--- or ---
Navigate to "%INSTALL_DIR\dcm\jboss-as-7.2.0.Final\bin" and run DCNM LAN Server in standalone mode using the "standalone-lan.bat". Note that this workaround is not persistent across reboot and that the Command Prompt window in which the "standalone-lan.bat" is executed must not be closed.
Further Problem Description:
This also results in the files not being included in the techsupport.bat script.
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 6.3(2), 7.1(1) | |
Known Fixed Releases: * | 6.2(11.4)S0, 6.2(13)FM(0.33), 6.2(13)GS(0.13), 7.0(0)BZ(0.98), 7.1(1.20)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCum62685 | Title: | Blank screen on DFA topology after POAP publish | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
From POAP definitions, if user edits a definition, goes through all the steps, and finally publishes it, and then tries to go to DFA topology, the screen becomes blank and unresponsive.
The same issue happens when POAP definition is saved and published, then navigated to DFA screen.
Conditions:
The POAP definition is saved/edited and published and the user goes to DFA topology screen.
Workaround:
Doing a browser reload (clicking the reload button on the browser being used) fixes the issue.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.0(1)S24 | |
Known Fixed Releases: * | 6.2(11)FI(0.8), 6.2(11)S2, 6.2(11.1)S0, 6.2(13)FM(0.13), 6.2(13)GS(0.13), 6.3(1.7)S0, 7.0(0)BZ(0.98), 7.0(1.26)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCut48826 | Title: | Notify Border Leaf option on BL/ER pairing is cleared in remote DB case | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
"Notify Border Leaf when relevant partitions are changed" checkbox is always cleared and the leafs do not get their configuration updated.
Conditions:
Happens when DCNM is configured with Oracle DB and partitions are extended.
Workaround:
'Manually run cli "fabric database auto-pull dci vrf VFRName node-id borderLeafIP peer-id edgeRouterIP" on the border leafs.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1.81) | |
Known Fixed Releases: * | 6.2(13)FM(0.54), 6.2(13)GS(0.15), 6.2(13.1)S0, 7.0(0)BZ(0.98), 7.1(1.91)S0, 7.2(0.5)S0, 7.3(0)D1(0.71), 7.3(0)DHB(0.31), 7.3(0)DX(0.16), 7.3(0)EG(0.3) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuu08025 | Title: | Need DB password in encrypted for some files | |
Status: | Fixed | |
Severity: | 3 Moderate | Description: | Symptom:
Need DB password in encrypted for some files
Conditions:
normal
Workaround:
unknown
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 6.3(2), 7.0(1), 7.1(2) | |
Known Fixed Releases: * | 7.0(0)BZ(0.108), 7.2(2.61)S0, 7.2(2.62)S0, 7.2(2.76)S0, 7.3(0)D1(0.179), 7.3(0)DX(0.93), 7.3(0)RSP(0.7), 7.3(0)SC(0.14), 7.3(0)TSH(0.99), 7.3(0)ZD(0.196) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuw18084 | Title: | Same name Partition Delete/Readd Fails already existing | |
Status: | Fixed | |
Severity: | 4 Minor | Description: | Symptom:
DCNM Unified Fabric install, where delete and readd of the same named partition fails with already existing error.
Conditions:
DCNM 7.2(1) OVA Unified install, can not readd same Partition name after delete, fails with already exists.
In WebUI Config > Fabric> Auto-Configuration > Organizations > Partition(delete)(add)
Workaround:
Clear browser cache or restart browser, or restart DCNM.
Further Problem Description:
Note - same name for Partition if the trigger.
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(1), 7.2(1.67) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.81)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73), 7.3(0)PDB(0.102), 7.3(0)RSP(0.7) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv63735 | Title: | Topology Map not appearing correctly | |
Status: | Fixed | |
Severity: | 4 Minor | Description: | Symptom:
Topology map of SAN client shows a small dot in the upper left corner.
Conditions:
Hide Unselected VSAN Members is being used when viewing maps of VSANs.
Workaround:
If a map file from a working user is copied over to the non-working user, the non-working user can then see the map.
Alternatively, if pressing the layout button does not correct the map, setting log level to ALL before pressing the layout button worked. Set log level to All for
com.cisco.dcbu.lib.map
com.cisco.dcbu.sm.client.map
then press the layout button. NOTE this will increase data written to fm.log so change log level back to WARN afterwards.
Further Problem Description:
The bad map files (located in C:\Program Files\Cisco Systems\dcm\fm\db\) will have large negative coordinates such as (-2147483648, -2147483648)
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(2) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.45)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73), 7.3(0)PDB(0.102), 7.3(0)RSP(0.7) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv49627 | Title: | Pull down in POAP Template look inactive | |
Status: | Fixed | |
Severity: | 5 Cosmetic | Description: | Symptom:
Pull down fields in POAP Template look inactive as text is shown light grey (Template Parameters). Text should be more solid black
Conditions:
new install with default values
Workaround:
none
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(1) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.68)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73), 7.3(0)PDB(0.102), 7.3(0)RSP(0.7) | |
|
| | | | |
Alert Type: | New | Bug Id: | CSCuz09330 | Title: | MDS 9000 Family NX-OS Security Configuration Guide missing TCP 161 | |
Status: | Open | |
Severity: | 5 Cosmetic | Description: | Symptom:
Cisco MDS 9000 Family NX-OS Security Configuration Guide lists ports that should be allowed when DCNM is running behind a firewall, but does not list TCP port 161. If DCNM is configured to use TCP, then TCP port 161 will be used.
Conditions:
DCNM configured via server.properties to use TCP will use TCP port 161 instead of UDP port 161.
Workaround:
None
Further Problem Description:
See the table at the following location:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/dcnm/installation/published/install/installing_DCNM.html#pgfId-643310
| |
Last Modified: | 07-APR-2016 | |
Known Affected Releases: | 6.3(2) | |
Known Fixed Releases: | | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv49707 | Title: | mouse over for N7k does not work on whole icon | |
Status: | Fixed | |
Severity: | 5 Cosmetic | Description: | Symptom:
mouse over for N7k in standard Topology does not work on whole icon. It is required to mouse over on certain small spots of the N7k to get additional information being showed up
Conditions:
new install with default values
Workaround:
none
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.1(1), 7.1(2), 7.2(1) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(1.64)S0, 7.3(0)D1(0.140), 7.3(0)DX(0.25), 7.3(0)EG(0.14), 7.3(0)GLF(0.25), 7.3(0)IB(0.122), 7.3(0)OTT(0.73), 7.3(0)PDB(0.102), 7.3(0)RSP(0.7) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCux20977 | Title: | DCNM POAP - Saved settings dropdown too small and names are not sorted | |
Status: | Fixed | |
Severity: | 6 Enhancement | Description: | Symptom:
The POAP Settings name is shown in a small drop down and is not sorted alphabetically and hence maybe hard ot locate the right settings file in the poap drop down box.
Conditions:
Workaround:
None. User has to mouse over each of the truncated names and parse through entire list to find the appropriate settings file.
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(1) | |
Known Fixed Releases: * | 7.0(0)BZ(0.108), 7.2(2.54)S0, 7.3(0)D1(0.179), 7.3(0)DX(0.93), 7.3(0)RSP(0.7), 7.3(0)SC(0.14), 7.3(0)TSH(0.99), 7.3(0)ZD(0.196) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCup33650 | Title: | DCNM ignores Root Directory for Config Archive | |
Status: | Fixed | |
Severity: | 6 Enhancement | Description: | Symptom:
DCNM Config Archive fails to upload configuration due to not using the correct Root Directory from Admin / SFTP/TFTP Credentials
Conditions:
This issue primarily affects Linux based DCNM where the SFTP user does not have privilege to write to /
Windows based DCNM typically uses 3rd party TFTP or SFTP which explicitly nominates the root directory as part of its configuration rather than relying on client, so is unaffected
Workaround:
Use TFTP, where the directory Config Files written to can be controlled by the OS
If using SFTP on Linux, allow SFTP as root
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 6.3(1), 6.3(2) | |
Known Fixed Releases: * | 6.2(11)FI(0.8), 6.2(11)S2, 6.2(11.1)S0, 6.2(13)FM(0.13), 6.2(13)GS(0.13), 7.0(0)BZ(0.98), 7.1(0.42)S0, 7.2(0)FM(0.2), 7.3(0)D1(0.71), 7.3(0)DHB(0.31) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCux05562 | Title: | Add option to clear networks from switch when deleting them from DCNM | |
Status: | Fixed | |
Severity: | 6 Enhancement | Description: | Symptom:
When deleting a network from DCNM we should automatically go in and delete the network from all switches
Conditions:
none
Workaround:
Delete network from DCNM and manually issue "clear fabric database host" on the switches
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(2) | |
Known Fixed Releases: * | 7.0(0)BZ(0.108), 7.2(2.74)S0, 7.3(0)D1(1), 7.3(0)DX(0.93), 7.3(0)TSH(0.99), 7.3(0)ZD(0.236), 7.3(1)D1(0.2), 7.3(1)PDB(0.19), 7.3(1)PIB(0.24) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCup27841 | Title: | vcenter 5.5 registration fails due to improper certs | |
Status: | Fixed | |
Severity: | 6 Enhancement | Description: | Symptom:
vcenter 5.5 registration fails in 6.3.1 due to checksum on certs.
need an option to ignore certs
Conditions:
Wireshark capture will show the VCenter certificate error.
Workaround:
Apply a valid certificate
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 6.3(1) | |
Known Fixed Releases: * | 6.2(10)CR(0.14), 6.2(10.7)S0, 6.2(11)FM(0.7), 6.2(12)BFP(0.13), 6.2(12)FM(0.5), 6.2(8)TS(0.28), 6.3(2)S47, 7.0(0)BZ(0.98), 7.1(0.39)S0, 7.3(0)D1(0.71) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv49839 | Title: | Partition ID should be configurable | |
Status: | Fixed | |
Severity: | 6 Enhancement | Description: | Symptom:
Partition ID should be configurable and go along with the VRF/VLAN/L3VNI pool requirement
Conditions:
new install with default values
Workaround:
none
Further Problem Description:
| |
Last Modified: | 21-APR-2016 | |
Known Affected Releases: | 7.2(1) | |
Known Fixed Releases: * | 7.0(0)BZ(0.98), 7.2(2.14)S0, 7.2(2.38)S0, 7.2(2.40)S0, 7.2(2.52)S0, 7.3(0)D1(0.140), 7.3(0)D1(0.156), 7.3(0)D1(0.179), 7.3(0)DX(0.25), 7.3(0)EG(0.14) | |
|
| | | | |
Alert Type: | Updated * | Bug Id: | CSCuv49624 | Title: * | POAP system image does not keep platform context | |
Status: | Fixed | |
Severity: * | 6 Enhancement | Description: | Symptom:
POAP Default System Image always ANY images, should be a true system image matching the selected platform (Single Device Image selection)
Conditions:
new install with default values
Workaround:
change to proper system image in POAP workflow (Single Device Image selection)
Further Problem Description:
| |
Last Modified: | 05-APR-2016 | |
Known Affected Releases: | 7.1(1), 7.1(2), 7.2(1) | |
Known Fixed Releases: | 7.3(0.309)S0, 7.3(0.315)S0 | |
|
| |
|
没有评论:
发表评论