| |
Bug Id: | CSCus81420 |
Title: | CSR1000v crashes upon boot-up with smart-licensing in day-0 config |
|
Description: | Symptom:
We're seeing sporadically (30-40% of boot attempts) that a CSR1000v crashes right at boot-up.
Conditions:
The following should be configured in the Day-0 config:
1.Smart Licensing is configured and a token is included in Day-0 config
2.Using IPV6
3.Using a HTTP proxy to reach the SLS server
Workaround:
None
Further Problem Description:
|
|
Status: | Fixed |
|
Severity: | 2 Severe |
Last Modified: | 07-MAY-2015 |
|
Known Affected Releases: | 15.4(3)S |
|
Known Fixed Releases: | 15.5(1)S1.1, 15.5(1)SN1, 15.5(1.18)S0.12, 15.5(2)S, 15.5(2.11)S |
|
|
| |
| |
Bug Id: | CSCus22550 |
Title: | 36067: hqf_vxe and other subsystem missing on Ultra appx |
|
Description: | Symptom:
QOS does not work properly when the APPX license is present on the CSR
Conditions:
QOS is configured and the APPX license is in effect on the CSR1000V.
Workaround:
Use the AX license if possible.
Further Problem Description:
|
|
Status: | Fixed |
|
Severity: | 2 Severe |
Last Modified: | 11-MAY-2015 |
|
Known Affected Releases: | 15.4(3)S |
|
Known Fixed Releases: | 15.4(3)S1.13, 15.4(3)S2, 15.5(1)S0.7, 15.5(1)S1, 15.5(1)SN1 |
|
|
| |
| |
Bug Id: | CSCut66361 |
Title: | CSR1000V: throughput subsystem initialzation failed. |
|
Description: | Symptom:
throughput is failed to be configured.
Conditions:
smart license is used.
Workaround:
N/A
Further Problem Description:
|
|
Status: | Fixed |
|
Severity: | 1 Catastrophic |
Last Modified: | 13-MAY-2015 |
|
Known Affected Releases: | 15.5(2)S |
|
Known Fixed Releases: | 15.5(2)S0.5, 15.5(2.22)S |
|
|
| |
| |
Bug Id: | CSCuq21344 |
Title: | CSR1000v MSMR Crash at route_map_set_community_command |
|
Description: | Symptom:
LISP MSMR Crash on route map add/delete
Conditions:
Modifying / Deleting route map
Workaround:
None
Further Problem Description:
NA
|
|
Status: | Terminated |
|
Severity: | 2 Severe |
Last Modified: | 15-MAY-2015 |
|
Known Affected Releases: | 15.4(3)S |
|
Known Fixed Releases: | |
|
|
| |
| |
Bug Id: | CSCut26305 |
Title: | CSR1000V: next reload license level is NOT working. |
|
Description: | Symptom:
next reload license level is shown to be wrong.
Conditions:
change license boot level over CSR1000V
Workaround:
N/A
Further Problem Description:
|
|
Status: | Fixed |
|
Severity: | 2 Severe |
Last Modified: | 20-MAY-2015 |
|
Known Affected Releases: | 15.5(2)S |
|
Known Fixed Releases: | 15.5(2)S0.5, 15.5(2.12)T, 15.5(2.14.1)PIH28, 15.5(2.16.5)PIH28, 15.5(2.19)S, 16.1(0.222) |
|
|
| |
| |
Bug Id: | CSCut66514 |
Title: | CSR crashes upon reboot at call home process with IPv6 address |
|
Description: | Symptom:
CSR 1000v licensed using smart licensing using call-home feature.
IPv6 addressing is enabled.
Call-home configuration has IPv6 HTTP proxy.
Reload CSR.
CSR crashes at call-home process continuously
Conditions:
CSR 1000v licensed using smart licensing using call-home feature.
IPv6 addressing is enabled.
Call-home configuration has IPv6 HTTP proxy.
Reload CSR.
CSR crashes at call-home process continuously
Workaround:
None
Further Problem Description:
CSR 1000v licensed using smart licensing using call-home feature.
IPv6 addressing is enabled.
Call-home configuration has IPv6 HTTP proxy.
Reload CSR.
CSR crashes at call-home process continuously
|
|
Status: | Other |
|
Severity: | 2 Severe |
Last Modified: | 28-MAY-2015 |
|
Known Affected Releases: | 15.5(2)S |
|
Known Fixed Releases: | |
|
|
| |
| |
Bug Id: | CSCuu35769 |
Title: | CSR1000V 4GB mem license may not allocate properly to dataplane |
|
Description: | Symptom:
When the CSR1000V VM is allocated 8192MB as per the documentation, installing the 4GB mem add-on license sends all 4GB memory to IOSd. It should be allocating 3GB to IOSd and 1GB to Data Plane.
http://www.cisco.com/c/en/us/td/docs/routers/csr1000/software/configuration/csr1000Vswcfg/licensing.html#17673
Conditions:
CSR1000V with the 4GB add-on license installed.
Workaround:
Add another ~512MB to the VM and reload the CSR.
Further Problem Description:
|
|
Status: | Open |
|
Severity: | 2 Severe |
Last Modified: | 29-MAY-2015 |
|
Known Affected Releases: | 15.5(2)S |
|
Known Fixed Releases: | |
|
|
| |
| |
Bug Id: | CSCuq29087 |
Title: | Periodic BFD Session Flaps on CSR1000v running 3.13.0 |
|
Description: | Symptom:
The primary symptom in this case is intermittent BFD session flaps on the CSR. The session flaps occur when the CSR does not send necessary BFD control packets within the appropriate time interval. Those packets are late because the associated timer events are delayed due to bad host BIOS settings that increase the time it takes the VM to resume running on a physical processor.
Conditions:
CSR VM running on vSphere 5.5
Host with less than optimal BIOS settings related to power management
Workaround:
You can modify the host BIOS settings, exact settings vary depending on type of host.
Generally, you want to do the following things:
1. Disable C-states
2. Disable Package C-states
3. Set any power-saving related option to maximum performance setting
VMware documentation and server documentation will generally provide guidance on low-latency BIOS settings that are generally best for hosts with CSR VMs.
Further Problem Description:
CSR1000v sensitivity to environmental time loss.
|
|
Status: | Open |
|
Severity: | 2 Severe |
Last Modified: | 29-MAY-2015 |
|
Known Affected Releases: | 15.4(3)S |
|
Known Fixed Releases: | |
|
|
| |
| |
Bug Id: | CSCuu38598 |
Title: | CSR1000V: platform memory is added when mem_4G OOC |
|
Description: | Symptom:
memory is added
Conditions:
mem_4G is in OOC state
Workaround:
NO
Further Problem Description:
|
|
Status: | Open |
|
Severity: | 2 Severe |
Last Modified: | 29-MAY-2015 |
|
Known Affected Releases: | 15.5(2)S |
|
Known Fixed Releases: | |
|
|
| |
:
没有评论:
发表评论